• Title/Summary/Keyword: proportions test

Search Result 345, Processing Time 0.03 seconds

A study on distribution comparison of response packets for major portal sites (주요 포털사이트의 응답패킷분포에 관한 연구)

  • Ryu, Gui-Yeol
    • Journal of the Korean Data and Information Science Society
    • /
    • v.24 no.3
    • /
    • pp.437-444
    • /
    • 2013
  • The object of study is to verify the distributions of response packets of 3 portal sites such as Naver, Daum, Nate. The period of experiments is from May 19th 2010 to November 7th 2012 and the number of experiments is 4,642. The distributions of Naver, Nate are biomodals. The distribution of Daum has long right tails. 3 distributions are different under 1% significance level using chi-square test and two sample Kolmogorov-Smirnov test. From proportions and percentiles, Naver has a distribution with the largest values. Nate is the second place, and Daum has a distribution with the smallest values. We must make portal pages light to increase response speed including other technologies. We expect our results to activate competition among portal sites.

Permeation properties of concretes incorporating fly ash and silica fume

  • Kandil, Ufuk;Erdogdu, Sakir;Kurbetci, Sirin
    • Computers and Concrete
    • /
    • v.19 no.4
    • /
    • pp.357-363
    • /
    • 2017
  • This paper conveys the effects of fly ash and silica fume incorporated in concrete at various replacement ratios on the durability properties of concretes. It is quite well known that concrete durability is as much important as strength and permeability is the key to durability. Permeability is closely associated with the voids system of concrete. Concrete, with less and disconnected voids, is assumed to be impermeable. The void system in concrete is straightly related to the mix proportions, placing, compaction, and curing procedures of concrete. Reinforced concrete structures, particularly those of subjected to water, are at the risk of various harmful agents such as chlorides and sulfate since the ingress of such agents through concrete becomes easy and accelerates as the permeability of concrete increases. Eventually, both strength and durability of concrete reduce as the time moves on, in turn; the service life of the concrete structures shortens. Mineral additives have been proven to be very effective in reducing permeability. The tests performed to accomplish the aim of the study are the rapid chloride permeability test, pressurized water depth test, capillarity test and compressive strength test. The results derived from these tests indicated that the durability properties of concretes incorporated fly ash and silica fume have improved substantially compared to that of without mineral additives regardless of the binder content used. Overall, the improvement becomes more evident as the replacement ratio of fly ash and silica fume have increased. With regard to permeability, silica fume is found to be superior to fly ash. Moreover, at least a 30% fly ash replacement and/or a replacement ratio of 5% to 10% silica fume have been found to be highly beneficial as far as sustainability is concerned, particularly for concretes subjected to chloride bearing environments.

A survey on cancer screening among the middle-aged in Pusan area (부산시 일부지역 중년남녀의 암 조기검진 수검 실태 조사)

  • 황선경;어용숙;조영란;서지민;이윤미;정인숙;주현옥
    • Korean Journal of Health Education and Promotion
    • /
    • v.19 no.3
    • /
    • pp.135-152
    • /
    • 2002
  • Objectives: Cancer is the most frequent cause of death in Korea. Cancer screenings can save lives through early detection and their effect can be enhanced by regular repeat adherence rather than one-time screening. The aim of this study was to investigate major cancer screening rates and the reasons for not having screening for providing the basic data required. Materials and Methods: The study sample were recruited from the parents of students in 3 different middle and high schools in Pusan. 428 participants(l93 of males, 214 of females) completed a structured self-administered questionnaire from Dec. 21 to 31, 2001 and the response rate was 73.8%. Data were analyzed using descriptive statistics with SPSS Win 10.0. Results: The cancer screening rates of the subjects(male and female respectively) who have had one or more in their life-time were about 36.3% and 34.6% in gastroendoscopy for stomach cancer, about 11.1 % and 8.5% in stool hemocult test and colonoscopy for colon cancer, 13.5% and 9.3% in prostate-antigen test and rectal digit exam for prostate cancer, 36.4% in mammograpy for breast cancer, and 59.3% in Pap smear test for cervical cancer. And the higher proportions of having regular screening were 36.0% in Pap smear test for cervical cancer and 11.7% in mammograpy for breast cancer. The reasons related to not having screening tests were found that ‘seem to be healthy’ was 44.8%∼58.9% and the most common reason and the following was ‘not having opportunity for check-up’. The most common reason related to not having regular screening tests were ‘for the finding of previous check-up was normal’.

Experimental Study on Correlation Analysis of Air-void, Air-spacing factor and Long-term Durability for Roller-compacted Concrete pavement (롤러 전압 콘크리트 포장의 공기량 및 기포간격계수와 장기 내구성의 상관관계 분석을 위한 실험적 연구)

  • Lee, Jun Hee;Lee, Seung Woo
    • International Journal of Highway Engineering
    • /
    • v.18 no.1
    • /
    • pp.63-72
    • /
    • 2016
  • PURPOSES : The use of roller-compacted concrete pavement (RCCP) is an environmentally friendly method of construction that utilizes the aggregate interlock effect by means of a hydration reaction and roller compacting, demonstrating a superb structural performance with a relatively small unit water content and unit cement content. However, even if an excellent structural performance was secured through a previous study, the verification research on the environmental load and long-term durability was conducted under unsatisfactory conditions. In order to secure longterm durability, the construction of an appropriate internal air-void structure is required. In this study, a method of improving the long-term durability of RCCP will be suggested by analyzing the internal air-void structure and relevant durability of roller-compacted concrete. METHODS : The method of improving the long-term durability involves measurements of the air content, air voids, and air-spacing factor in RCCP that experiences a change in terms of the kind of air-entraining agent and chemical admixture proportions. This test should be conducted on the basis of test criteria such as ASTM C 457, 672, and KS F 2456. RESULTS : Freezing, thawing, and scaling resistance tests of roller compacted concrete without a chemical admixture showed that it was weak. However, as a result of conducting air entraining (AE) with an AE agent, a large amount of air was distributed with a range of 2~3%, and an air void spacing factor ranging from 200 to $300{\mu}m$ (close to $250{\mu}m$) coming from PCA was secured. Accordingly, the freezing and thawing resistance was improved, with a relative dynamic elastic modulus of more than 80%, and the scaling resistance was improved under the appropriate AE agent content rate. CONCLUSIONS : The long-term durability of RCCP has a direct relationship with the air-void spacing factor, and it can be secured only by ensuring the air void spacing factor through air entraining with the inclusion of an AE agent.

Evaluation of Setting Time in Cement Paste with Fly Ash Replacement Using Piezoelectric Sensors (압전센서를 이용한 플라이애시 치환 시멘트 페이스트의 응결 시점 평가)

  • Jun-Cheol Lee;Tae-Yong Go;Chang-Yong Yi
    • Journal of the Korean Recycled Construction Resources Institute
    • /
    • v.12 no.2
    • /
    • pp.162-168
    • /
    • 2024
  • This study investigated the setting characteristics of cement paste with varying proportions of fly ash replacement using the electro-mechanical impedance (EMI) sensing technique. Cement paste samples were prepared with a water-to-binder ratio of 40 %, substituting fly ash for 10 %, 20 %, and 30 % of the cement weight. Piezoelectric (PZT) sensors were embedded in the center of each cement paste sample to continuously monitor the EMI signals. Vicat needle test and semi-adiabatic calorimetry test were conducted to validate the reliability of the EMI sensing technique in monitoring the setting of cement paste. Experimental results revealed notable changes in the magnitude and resonant frequency of the EMI resonant peaks during the setting time. It was confirmed that the setting times measured through the EMI sensing technique were correlated with those determined by the Vicat needle test and semi-adiabatic calorimetry test.

Error cause analysis of Pearson test statistics for k-population homogeneity test (k-모집단 동질성검정에서 피어슨검정의 오차성분 분석에 관한 연구)

  • Heo, Sunyeong
    • Journal of the Korean Data and Information Science Society
    • /
    • v.24 no.4
    • /
    • pp.815-824
    • /
    • 2013
  • Traditional Pearson chi-squared test is not appropriate for the data collected by the complex sample design. When one uses the traditional Pearson chi-squared test to the complex sample categorical data, it may give wrong test results, and the error may occur not only due to the biased variance estimators but also due to the biased point estimators of cell proportions. In this study, the design based consistent Wald test statistics was derived for k-population homogeneity test, and the traditional Pearson chi-squared test statistics was partitioned into three parts according to the causes of error; the error due to the bias of variance estimator, the error due to the bias of cell proportion estimator, and the unseparated error due to the both bias of variance estimator and bias of cell proportion estimator. An analysis was conducted for empirical results of the relative size of each error component to the Pearson chi-squared test statistics. The second year data from the fourth Korean national health and nutrition examination survey (KNHANES, IV-2) was used for the analysis. The empirical results show that the relative size of error from the bias of variance estimator was relatively larger than the size of error from the bias of cell proportion estimator, but its degrees were different variable by variable.

Changes of Correlational Reasoning Patterns of Middle School Students Through the Correlational Reasoning Activities (상관논리 활동을 통한 중학생들의 상관논리 유형 변화)

  • Park, Jong-Yoon;Kim, Ji-Young;Nam, Jeong-Hee;Lee, Sang-Kwon;Choi, Byung-Soon
    • Journal of The Korean Association For Science Education
    • /
    • v.22 no.4
    • /
    • pp.696-705
    • /
    • 2002
  • The main purpose of this study is to investigate whether the correlational reasoning activities could improve middle school students' correlational reasoning abilities. The subjects were 8th grade students, and the correlational reasoning activities of the CASE(cognitive acceleration through science education) program was intervened to the experimental group(n=111) during science class while usual science instruction was given to the control group(n=55). The correlational reasoning test was administered before and after the intervention. The pre-test results showed that most of subjects performed poorly in correlation problems and no significant differences were found between the two groups. In the post-test, the experimental group showed enhanced performance while the control group did not. Therefore it can be concluded that CASE program activities help the students to improve correlational reasoning ability. However, the proportions of students gave correct response were not so high: 27% for the multiple-choice item and about 6% for the essay-type items.

Effect of soldering techniques and gapdistance on tensile strength of soldered Ni-Cr alloy joint

  • Lee, Sang-Yeob;Lee, Jong-Hyuk
    • The Journal of Advanced Prosthodontics
    • /
    • v.2 no.4
    • /
    • pp.117-121
    • /
    • 2010
  • PURPOSE. The present study was intended to evaluate the effect of soldering techniques with infrared ray and gas torch under different gap distances (0.3 mm and 0.5 mm) on the tensile strength and surface porosity formation in Ni-Cr base metal alloy. MATERIALS AND METHODS. Thirty five dumbbell shaped Ni-Cr alloy specimens were prepared and assigned to 5 groups according to the soldering method and the gap distance. For the soldering methods, gas torch (G group) and infrared ray (IR group) were compared and each group was subdivided by corresponding gap distance (0.3 mm: G3 and IR3, 0.5 mm: G5, IR5). Specimens of the experimental groups were sectioned in the middle with a diamond disk and embedded in solder blocks according to the predetermined distance. As a control group, 7 specimens were prepared without sectioning or soldering. After the soldering procedure, a tensile strength test was performed using universal testing machine at a crosshead speed 1 mm/min. The proportions of porosity on the fractured surface were calculated on the images acquired through the scanning electronic microscope. RESULTS. Every specimen of G3, G5, IR3 and IR5 was fractured on the solder joint area. However, there was no significant difference between the test groups (P > .05). There was a negative correlation between porosity formation and tensile strength in all the specimens in the test groups (P < .05). CONCLUSION. There was no significant difference in ultimate tensile strength of joints and porosity formations between the gas-oxygen torch soldering and infrared ray soldering technique or between the gap distance of 0.3 mm and 0.5 mm.

A Study on the Evaluation of the Durability of Concrete Using Copper Slag Aggregates (동슬래그 골재를 함유한 콘크리트의 내구성 평가 연구)

  • Lee, Mun-Hwan
    • Journal of the Korea Concrete Institute
    • /
    • v.20 no.6
    • /
    • pp.773-784
    • /
    • 2008
  • Even if the exploitation of copper slag produced during the smelting process of copper as aggregate for construction purpose has been permitted since 2004 in Korea, the lack of sufficient data enabling to evaluate its long-term stability that is its durability has to date impeded its application. This study intends to investigate experimentally the durability characteristics of 18 and 27 MPa-class commercial concretes in which natural sand (fine aggregates) has been partially replaced by copper slag through accelerated and exposure tests so as to provide bases promoting the application of copper slag concrete. The experimental results revealed insignificant difference of the durability characteristics in most of the mix proportions in which 30% of natural sand was replaced by copper slag. In the case where crushed sand was adopted, tests verified similar characteristics for replacement ratio of 50%. Particularly, the results of the exposure test conducted during 8 years demonstrated that equivalent level of durability was secured compared to the case using natural sand. In the case of 18MPa-class lower grade concrete, exposure test verified also that the physical lifetime similar to 50 years could be secured until carbonation reaches cover depth of 20 mm.

Comparison of Interferon-γ Release Assays and the Tuberculin Skin Test for Diagnosis of Tuberculosis in Human Immunodeficiency Virus: A Systematic Review

  • Overton, Kristen;Varma, Rick;Post, Jeffrey J.
    • Tuberculosis and Respiratory Diseases
    • /
    • v.81 no.1
    • /
    • pp.59-72
    • /
    • 2018
  • Background: It remains uncertain if $interferon-{\gamma}$ release assays (IGRAs) are superior to the tuberculin skin test (TST) for the diagnosis of active tuberculosis (TB) or latent tuberculosis infection (LTBI) in immunosuppressed populations including people with human immunodeficiency virus (HIV) infection. The purpose of this study was to systematically review the performance of IGRAs and the TST in people with HIV with active TB or LTBI in low and high prevalence TB countries. Methods: We searched the MEDLINE database from 1966 through to January 2017 for studies that compared results of the TST with either the commercial QuantiFERON-TB Gold in Tube (QFTGT) assay or previous assay versions, the T-SPOT.TB assay or in-house IGRAs. Data were summarized by TB prevalence. Tests for concordance and differences in proportions were undertaken as appropriate. The variation in study methodology was appraised. Results: Thirty-two studies including 4,856 HIV subjects met the search criteria. Fourteen studies compared the tests in subjects with LTBI in low TB prevalence settings. The QFTGT had a similar rate of reactivity to the TST, although the first-generation version of that assay was reactive more commonly. IGRAs were more frequently positive than the TST in HIV infected subjects with active TB. There was considerable study methodology and population heterogeneity, and generally low concordance between tests. Both the TST and IGRAs were affected by CD4 T-cell immunodeficiency. Conclusion: Our review of comparative data does not provide robust evidence to support the assertion that the IGRAs are superior to the TST when used in HIV infected subjects to diagnose either active TB or LTBI.