• 한국국방경영분석학회지
• /
• 제27권1호
• /
• pp.73-88
• /
• 2001

Designing high quality products and processes at a low cost is central technological and economic challenge to the engineer. The combination of engineering concepts and statistical implementations offered by Taguchi\`s off-line design technique has proven t be invaluable. By examining some deficiencies in designs from the Taguchi\`s highly fractional, orthogonal main effect plan based on orthogonal arrays, alternative method is proposed. The maximum resolution or the minimum aberration criterion is commonly used for selecting 2$^{n-m}$ fractional designs. We present new high resolution (low aberration) linear graphs to simplify the complexity of selecting designs with desirable statistical properties. The new linear graphs approach shows a substantial improvement over Taguchi\`s linear graphs and other related graphical methods for planning experiment. The new set of linear graphs will allow the experimenter to maintain the simple approach suggested by Taguchi while obtaining the best statistical properties of the resulting design such as minimum aberration as a by-product without dependency on complicated computational algorithm or additional statistical training.g.

• 한국경영과학회지
• /
• 제36권3호
• /
• pp.27-43
• /
• 2011

This paper investigates properties of the newsvendor problem under a schedule involving progressive multiple discounts compared with the standard newsvendor problem under a no-discounts schedule. Unlike most conventional approaches using the criticial fractile to analyze the retailer and/or supplier behavior(s) in the newsvendor problem, our approach uses riskless profit. From the properties revealed through a series of computational experiments, two conjectures regarding the relationship between the expected profits of both newsvendor problems as a generalization over Khouja's argument (1995) are raised. Those conjectures encourage newsvendors who may face budget or warehouse capacity restriction to use the extended model under a multiple-discounts schedule rather than the standard model with no-discounts schedule because they apply for every order quantity as well as the optimal order quantity. In addition to the conjectures, some insightful results are found to justify the implementation of a multiple-discounts schedule from the computational experiments and a new interpretation for implementation of a multiple-discounts schedule that has not been addressed in Khouja is provided.

• 한국경영과학회지
• /
• 제20권1호
• /
• pp.115-130
• /
• 1995

This paper considers a single machine nonpreemptive scheduling problem with a given common due date. In the problem, the optimal job sequence is sought to minimize the sum of earliness/tardiness and flow time measures in the situation where all jobs are available at time zero, and weights per unit length of earliness/tardiness and flow time are V and W, respectively. Some dominant solution properties are characterized to deriva both an optimal starting time for an arbitrary sequence and sequence improvement rules. The optimal schedule is found to the case W .geq. V/. By the way, it is difficult to find the optimal schedule for the case W < V. Therefore, the derived properties are put on together to construct a heuristic solution algorithm for the case W < V, and its effectiveness is rated at the mean relative error of about 3% on randomly generated numerical problems.

• 경영과학
• /
• 제26권1호
• /
• pp.1-5
• /
• 2009

I study a solution concept which preserves the nice Nash equilibrium properties of two-person zero-sum games, and define a locally competitive equilibrium which is characterized by a saddle point with respect to the coordinates of strategies. I show that a locally competitive equilibrium shares the properties of uniqueness of equilibrium payoffs, interchangeablity of equilibrium strategies and convexity of the equilibrium set.

• East Asian mathematical journal
• /
• 제16권1호
• /
• pp.147-159
• /
• 2000

In this paper, we investigate the properties of non-normal(convexoid, hyponormal) adjacency operators for a graph under two operations, tensor product and Cartesian one.

• Korean Journal of Mathematics
• /
• 제20권3호
• /
• pp.293-305
• /
• 2012

We investigate the properties of modal, necessity, sufficiency and co-sufficiency operators. We show that their operations induce various relations, respectively.

• 한국수소및신에너지학회논문집
• /
• 제22권4호
• /
• pp.488-494
• /
• 2011

Gasket plays an important role on sealing of the polymer electrolyte membrane fuel cell (PEMFC) stack. Stack requires gaskets in each cell to keep the hydrogen and air/oxygen within their respective regions. The failure of the gasket creates the problems of fuel leakage, mixing, damage on parts and can be a direct reason for the degrading the efficiency of fuel cell. The purpose of this paper researches on how mechanical properties of EPDM gasket in PEMFC are changed after long-term operations. The EPDM (ethylenepropylene-diene monomer) gaskets are obtained from the stack after long-term operations. DMA (dynamic mechanical analysis) is conducted to access the change of mechanical properties of the EPDM gasket. SEM/EDS (scanning electron microscope/energy dispersive spectroscopy) was used to show the surface topography and chemical characterization on the sample surface.

• Journal of Biosystems Engineering
• /
• 제32권4호
• /
• pp.215-222
• /
• 2007

In the study, the cone index, the cohesion and the internal friction angle of soil were measured before and after tillage in order to suggest relative improvement in soil properties by comparing the two measured values before and after tillage. The tillage methods tested in the study were five combinations of plowing and rotovating; one plow tillage operation, one plow followed by one rotary, one plow followed by two rotary, one rotary without plow and two rotary without plow. The experiments were performed in a soil bin in Sunggyunkwan Univ. and in four selected test fields in Yeoju, Seodun-Dong, Suwon (especially, two different fields) and Chungju. In general, the internal friction angle and cohesion of soil increased with the increase of soil compaction. After applying the tillage operations, the internal friction angle reduced by 14 degree and the cohesion decreased up to about $2.2N/cm^2$ on the soil bin in comparison with those before tillage. The two values, however, reduced by 9 degree and up to about $1.0N/cm^2$ on the tested fields. The CIs for all the tillage operations on the soil bin and on 4 different test fields were decreased by 800 kPa in comparison with those before tillage. The best combination of tillage operations for decreasing the CIs of soil was one plow operation followed by one rotary. The CIs for one plow operation followed by two rotary were slightly higher than that for one plow operation followed by one rotary because one plow operation followed by two rotary crushed down the soil excessively, so that the porosity of soil decreased.

• 한국경영과학회지
• /
• 제33권3호
• /
• pp.1-16
• /
• 2008

This paper considers a scheduling problem to minimize the total tardiness in the two-stage assembly-type flowshop. The system is composed of multiple fabrication machines in the first stage and a final-assembly machine in the second stage. Each job consists of multiple tasks, each task is performed on the fabrication machine specified in advance. After all the tasks of a job are finished, the assembly task can be started on the final-assembly machine. The completion time of a job is the time that the assembly task for the job is completed. The objective of this paper is to find the optimal schedule minimizing the total tardiness of a group of jobs. In the problem analysis, we first derive three solution properties to determine the sequence between two consecutive jobs. Moreover, two lower objective bounds are derived and tested along with the derived properties within a branch-and-bound scheme. Two efficient heuristic algorithms are also developed. The overall performances of the proposed properties, branch-and-bound and heuristic algorithms are evaluated through numerical experiments.

• 한국전기전자재료학회논문지
• /
• 제27권10호
• /
• pp.657-661
• /
• 2014

When an abnormal condition occurs due to a fault current at a consumer location where electricity is supplied through high-Tc superconducting(HTS) cable, the HTS cable would be damaged if there is no appropriate method to protect it. The fault-current-limiting type HTS cable that is suggested in this study has a structure of transport part and limit part. It conduct a zero impedance transport current at ordinary operations and carry out a fault current limiting at extraordinary operations. To make a perfect this structure, it is essential to investigate electrical properties of transport part that comprise the fault-current-limiting type HTS cable. In this paper, transport part that comprise HTS wire with copper stabilization layer is examined the current transport properties and the stability evaluation.