• Transactions on Electrical and Electronic Materials
• /
• 제18권6호
• /
• pp.345-349
• /
• 2017

Reconfiguration is an important method to minimize power loss and load interruption by creating an optimal configuration of a system. Furthermore, by increasing demand and value of consumption, construction of new power plants can be postponed in networks by reconfiguration and proper arrangement of linkage switches. This method is feasible for radial networks, which create meshes of linkage switches. One convenient way to achieve a system with minimal power loss and interruption is to utilize capacitors. Optimal placement and sizing of capacitors in such applications is an important issue in the literature. In this paper, cat swarm optimization is introduced as a new metaheuristic algorithm to achieve this purpose. Simulation has been carried out in two feasible networks, 69-bus and 33-bus systems.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2015년도 제46회 하계학술대회
• /
• pp.367-368
• /
• 2015

최근에 인도와 유럽을 중심으로 기존의 AC 송전계통 중 일부를 DC 송전계통으로 대체하는 하이브리드형 송전방식에 대한 연구가 진행중이다. 따라서 본 연구는 기존에 연구되고 있는 하이브리드형 가공송전계통을 기반으로 지중송전계통을 포함한 하이브리드형 혼합송전계통이 향후 머지않아 국내에서 계획 및 건설될 것을 대비한 초기 연구로서 진행하였다. 본 논문의 관점은 하이브리드 혼합송전계통 중 지중송전계통구간에서 DC 선로가 AC선로로부터 얼마나 고조파 전압 및 전류 측면에서 영향을 받는가를 평가하고, 이를 근거로 DC 케이블의 배열을 선정하고자 한다. 또한 DC 케이블 배열 선정을 위해 가능성이 있는 여러 개의 CASE별로 구분하고, 가장 타당한다고 평가되는 배열을 제안하고자한다. 본 연구에서 계통 모델링 및 해석은 EMTP를 이용하였다.

• 대한토목학회논문집
• /
• 제12권2호
• /
• pp.161-167
• /
• 1992

보강재 절단에 의한 보강토옹벽의 파괴시 그의 지내력과 파괴 메카니즘을 조사하기 위하여 원심모형실험을 수행하였다. 보강재의 재질, 길이 및 배열을 변화시키면서 실험을 실시하여 그들이 보강토 옹벽의 지내력에 미치는 영향에 관하여 연구하였다. 실험결과를 분석하고 현재 사용되고 있는 여러 설계방법과 비교 검토함으로써 그들의 사용 타당성을 검증하였다. 그 결과로 적정의 설계방법을 제안하였다.

• 대한조선학회 특별논문집
• /
• 대한조선학회 2008년도 특별논문집
• /
• pp.10-15
• /
• 2008

The proper docking block arrangement, loading condition and structural reinforcement are required to ensure structural safety of ship, when she is in re-docking and launching for inspection or repair. The large reaction force due to narrow bottom tangent area, heavy weight and ballast loading are occurred at aft body and fore body of ship. Especially, in case of LNGC, the strength evaluation is necessary for cargo hold areas including mid-body because tank hydro test is performed in dry-dock. The analysis results and experiences to confirm structural safety for docking of conventional LNGC$(138K{\sim}151.7K)$ are introduced in this paper.

• 농업과학연구
• /
• 제17권1호
• /
• pp.18-25
• /
• 1990

The above results indicate that vegetable crop production using vinyl houses continously increases. However, technical support and facility improvement are still insufficent to establish a full production system. In order to improve the cultural environment in facilities for better vegetable culture, several facters should be considered. 1. Facility design and arrangement should be made to improve micro-environments for crop growth and development because direction of facility and covering materials can affect the amount of light trasmitted into vinyl houses. 2. Cultivation of several leading varieties in each crop may not provide stable production and profit especially under undesirable environmental conditions. Thus, it is required to grow not only leading varieties but also other cultivars to decrease the economic losses. 3. Crops should be carefully managed when planted in early season not to experience low temperatures which induce growth retards. Early season cultivation requires proper selection of cultivars which are resistant to low temperture. 4. Active control of micro-environment in facilities should be made via improving the ventilation and irrigation systems.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2001년도 봄 학술발표회 논문집
• /
• pp.69-75
• /
• 2001

It is very important to secure the marine vessels during entire loading and off-loading operations. The environment influences on loading conditions. the western coastal area of Korea is characterized as a strong current due to a high tidal range. The tension of mooring lines varies as per the current and wave changing its magnitude during the day. A proper mooring arrangement and design of mooring line should be determined as per environment conditions. In this study, a 50,000 DWT container ship being moored is investigated numerically. The dynamic tension of mooring lines is estimated by MORA (Mooring Response Analysis) software. Environmental conditions of selected offshore terminal site are plugged as input data. The mooring line tensions are obtained for various wave frequencies per wave directions. The results demonstrate the change of tensions of lines and the allowable range of safe conditions in berthed mooring.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 추계학술대회 논문집
• /
• pp.922-927
• /
• 2004

The bending moment and settlement of the slab track can be reduced by the installation of small numbers of micro piles beneath the track. This paper presents the effect of micro pile installation on the reduction of bending moment and settlement of slab track, estimated by a numerical method. The slab track is modeled as a plate based on the Mindlin's plate theory, and soil and piles are modeled as Winkler and coupled springs, respectively. The stiffness of piles is obtained by the approximate analytical method proposed by Randolph and Wroth. and the modulus of subgrade reaction is adopted to evaluate Winkler spring constant. From the analysis results, the effect of the micro pile installation is significant to considerably reduce the settlement of slab track. However, for the proper reduction of bending moments in a slab track, the pile arrangement should be reasonably taken into account to prevent the stress concentration at pile location.

• 한국농촌건축학회논문집
• /
• 제15권3호
• /
• pp.33-40
• /
• 2013

The rural traditional houses in Taebaek mountainous regions play important roles in figuring out values and social aspects of past time including housing life. But due to the introduction of convenient facilities in the current housing life style after industrialized society, many transformations have been taken place even to exist rural traditional folk houses such as installation of new equipment and furniture, the arrangement and function change of rooms, expansion of residential area and etc. So this study aims to secure basic data to prepare installation standard of the convenient facilities as examining convenience facility installation status of the cultural asset designated as rural traditional house, and to identify the meaning and usage of major room of rural traditional houses in order to prepare the proper balances between its original form preservation and residents' convenience living.

• 한국실내디자인학회:학술대회논문집
• /
• 한국실내디자인학회 2008년도 춘계학술발표대회 논문집
• /
• pp.78-81
• /
• 2008

The number of clinics for Oriental Clinic is increasing sharply in Korea after the inception of National Health Insurance System in 1987. However there have been many troubles in making efficient plans for oriental clinic facilities because of the lack of proper guidelines related to the design of them. This research was conducted as part of the planning project for the "G" Oriental Clinic. The purpose of this project Is to place a optimal number of beds in a small oriental clinic and medical-environmental friendly design After arranging necessary spaces, such as the Director's Office, Herbal Medicine Preparation Room, Multipurpose Room, Medicine Cabinet, and Waiting Room in the clinic, partitions are used to differentiate the spaces and the storage area.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제53권2호
• /
• pp.103-110
• /
• 2004

This paper proposes a new method on the EMG AR(autoregressive) modeling in pattern recognition for various head motions. The proper electrode placement in applying AR or cepstral coefficients for EMG signature discrimination is investigated. EMG signals are measured for different 10 motions with two electrode arrangements simultaneously. Electrode pairs are located separately on dominant muscles(S-type arrangement), because the bandwidth of signals obtained from S-type placement is wider than that from C-type(closely in the region between muscles). From the result of EMG pattern recognition test, the proposed mIAR(modified integrated mean autoregressive model) technique improves the recognitions rate around 17-21％ compared with other the AR and cepstral methods.