• 한국안전학회지
• /
• 제27권3호
• /
• pp.28-35
• /
• 2012

We investigated the breakdown patterns of silica glass under the various impacts by forensic scientific analysis. The impacts were chosen by thermal and projectiles impact stress. Thermal impacts under the fire were constructed by changing the position of the flame with gas torches. Physical impacts were constructed with the projectiles of slingshots and rifles by changing the size of the projectiles at the surfaces and the initial distance. Also we identified incident angles of the projectiles by analysis of the punching portion at the glass surface. Under the thermal impacts, the breakdown patterns were various by changing the position of the flame. Especially, the configuration of breakdown patterns had radial shape with the position of the flame at the center of the glass sheet. Under the physical impacts by the projectiles, the breakdown patterns had always radial shape.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제13권1호
• /
• pp.450-465
• /
• 2021

In this study, an attempt has been made to investigate the water-entry characteristics of the high-speed parallel projectile numerically. The shear stress transport k-𝜔 turbulence model and the Zwart-Gerber-Belamri cavitation model based on the Reynolds-Averaged Navier-Stokes method were used. The grid independent inspection and grid convergence index is carried out and verified. The influences of the parallel water-entry on flow filed characteristics, trajectory stability and drag reduction performance for different values of initial water-entry speed (𝜈₀ = 280 m/s, 340 m/s, 400 m/s) and clearance between the parallel projectiles (L_p = 0.5D, 1.0D, 2.0D, 3.0D) are presented and analyzed in detail. Under the condition of the parallel water-entry, it can be found that due to the intense interference between the parallel projectiles, the distribution of cavity is non-uniform and part of the projectile is exposed to water, resulting in the destruction of the cavity structure and the decline of trajectory stability. In addition, the parallel projectile suffers more severe lateral force that separates the two projectiles. The drag reduction performance is impacted and the velocity attenuation is accelerated as the clearance between the parallel projectiles reduces.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제12권1호
• /
• pp.479-490
• /
• 2020

The hydrodynamic characteristic of transonic motion projectiles with different head diameters are investigated by numerical simulation. Compressibility effect in liquid-phase water are modeled using the Tait state equation. The result shows that with increasing of velocity the compression waves transfer to shock waves, which cause the significant increasing of pressure and decreasing the dimensions of supercavities. While the increasing of head diameter, the thickness, the vapor volume fraction and the drag coefficient of supercavities are all enhanced, which is conducive to the stability of transonic-speed projectiles. The cavity dynamics of the different head projectiles are compared, and the results shows when Mach number is in high region, the truncated cone head projectile is enveloped by a cavity which results in less drag and better stability.

• 대한건축학회논문집:구조계
• /
• 제35권2호
• /
• pp.13-20
• /
• 2019

This study was conducted in order to validate the nose shape factors of projectile in existing impact formulas for high-strength concrete in the event of collision with high-speed projectiles. In order to conduct the high-speed impact experiment, specified concrete strengths of 35, 100, and 120 MPa were prepared and tested in collision with both conical and hemispherical projectiles. The results showed that the measured penetration depth did not decrease linearly as concrete strength increased. Comparing the ratio penetration depth to the kinetic energy of the conical and hemispherical projectiles, the difference in the ratios for high strength concrete was observed to decline as concrete strength increased. However, in the modified NDRC and the Hughes formulas, the difference in the predicted penetration depth of the conical and hemispherical projectiles was constant despite increasing concrete strength. The modified NDRC and Hughes formulas should be improved upon so as to be applied to high strength concrete.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2002년도 학술대회지
• /
• pp.751-754
• /
• 2002

The SFU(Solid Fuel Ram-Jet) propulsion is attractive for projectiles because of the combination of high propulsive performance and low system complexity more than conventional projectiles. The Objective of this research was to characterize the inlet aerodynamic characteristics (centerbody & pilot type) in SFRJ. Diffuser static pressure & combustion chamber pressure was tested and the AoA was changed $0^{\circ}\;and\;4^{\circ}$ at Mach number of 3.0 for performance estimate. The performance study of inlet was carried out with the Schlieren system and Supersonic cold-flow system. A Computational fluid dynamic solution is applied internal flow of inlet and the solutions are compared with experimental results.

• 한국군사과학기술학회지
• /
• 제14권2호
• /
• pp.321-325
• /
• 2011

After investigating the analytic model to predict penetration depth, we propose an analytical model which can be used in estimating the normal penetration characteristics of small projectiles, when they are impacted to the concrete targets with ordnance velocities. The major parameters of this model are nose factor of penetrator, compressive strength and density of targets, and impact velocity. We can predict accelerations, velocities, displacements of projectiles and applied forces by this proposed model. Estimated penetration depths were shown 5% error. We also verified the usefulness of the new method with laboratory impact test data.

• Structural Engineering and Mechanics
• /
• 제13권2호
• /
• pp.171-186
• /
• 2002

Static and dynamic penetration tests of reinforced concrete (RC) slab specimens are described and discussed. The experimental study was aimed at a better understanding of mechanisms that are involved in dynamic penetration, through their identification in static tests, and by establishing their relative influence in similar dynamic cases. The RC specimens were $80{\times}80-cm$ square plates, and they were made of 30 MPa concrete. The non-deforming steel penetrator was a 50-mm diameter steel rod with a conical nose of 1.5 aspect ratio. Impact penetration tests were carried out with an air gun, which launched the projectiles at velocities of up to 300 m/sec. The static tests were conducted using a closed loop displacement control actuator, where the penetrator was pushed at a constant rate of displacement into the specimen. The static tests reveal important mechanisms that govern the penetration process and therefore contribute to a better understanding of RC barriers resistance to non-deforming projectiles impact.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2000년도 제14회 학술강연논문집
• /
• pp.14-14
• /
• 2000

One of the most important aerodynamic performance characteristics for projectiles is the total drag which can be typically divided into three components, pressure drag (excluding the base), viscous skin friction drag, and base drag. In a range of supersonic flight speeds the base drag is a major contributor to the total drag and can be as much as 50%∼70% of the total drag, depending on the afterbody configuration of projectiles. It is of especial importance to minimize this part of. the drag.

• 한국항행학회논문지
• /
• 제25권5호
• /
• pp.370-376
• /
• 2021

항공 우주 산업의 발전으로 발사체의 연구가 많아지고 있다. 더불어 많은 시험이 진행하고 있고 그에 따라 많은 실패도 발생한다. 발사체는 다른 전자장비보다 위험성이 높기 때문에 실패를 최소화할 수 있어야 한다. 따라서 발사체에 전원을 공급하기 전에 배선을 검증할 필요가 있다. 이에 따라 저항 측정을 통해 배선 상태를 검증하였다. 하지만 이전의 저항측정 방식의 배선 점검은 발사체 회로의 커패시터, 인덕터등의 소자들 때문에 정확한 측정을 할 수 없다. 본 논문에서는 TDR 미터를 이용하여 케이블 및 발사체의 연결 상태에서 임피던스를 측정한다. 측정한 정상상태의 임피던스의 기준 값을 설정하기 위해 Z-Segmentation 알고리즘을 사용한다. Z-Segmentation 알고리즘은 우선 임피던스 파형의 피크 값들을 칼만 필터를 이용하여 찾고 찾은 피크값을 Segmentation을 통해 최종 impedance peak segment를 얻는다. 이런 방법으로 배선의 정상 상태에 대한 기준 값으로 설정하고 이를 기준으로 배선 상태를 판정한다.

• 한국항공우주학회지
• /
• 제34권11호
• /
• pp.1-8
• /
• 2006

축대칭 발사체의 동적 감쇠계수를 계산하기 위한 정상 예측 방법을 제안한다. 관성좌표계에서 영스핀 코닝 운동을 사용한 정상 해법을 적용하기 위해서는 점성유동 해석이 필수적으로 이루어져야 한다. 제안된 방법을 회전발사체에 적용하여 피칭모멘트와 피치감쇠 모멘트계수를 계산하였다. 결과는 포물형 Navier-Stokes 예측 결과, 실험결과, 비정상 예측 결과와 잘 일치함을 확인하였다. 또한, secant-ogive-cylinder 계열 발사체에 대한 정적 및 동적 계수의 축방향 생성과정을 살펴봄으로써 후방동체의 형상으로 인한 유동 변화가 동적 안정성에 미치는 영향을 고찰하였다.