• The Korean Journal of Ecology
• /
• v.27 no.3
• /
• pp.147-153
• /
• 2004

The objective of this study was to understand differences among three half-sib families of Betula schmidtii seedlings in the effect of three Cd levels on growth and photosynthesis. One-year-old seedlings of B. schmidtii were treated with 0, 0.4 and 0.8 mM CdSO$_4$ㆍ8/3$H_2O$ for two months. Growth and physiological responses to Cd treatment levels of three families determined using dry weight, relative height growth rate(RHGR), apparent quantum yield and carboxylation efficiency. The B. schmidtii seedlings exposed to 0.4 and 0.8 mM Cd showed statisticall significant decrease in dry weight and RHGR relative to controls. In addition, the growth inhibition of B. schmidtii seedlings was accompanied by a significant decrease in net photosynthesis measured as $CO_2$ assimilation. Apparent quantum yield and carboxylation efficiency were also affected by Cd treatment, undergoing a significant and progressive reduction with increasing Cd concentrations in all families. We also found significant difference among three families of B. schmidtii in growth, biomass and photosynthesis when exposed to Cd stress. Therefore the present study showed that the difference in Cd tolerance among families might be attributed to genetic factor in response to Cd stress.

• Tunnel and Underground Space
• /
• v.14 no.1
• /
• pp.54-68
• /
• 2004

In this study, scaled model tests were performed on blasting demolition of reinforced concrete structures and the experimental results were analyzed in comparison with the results of numerical analysis. The tests were designed to induce a progressive collapse, and physical properties of the scaled model were determined using scale factors obtained ken dimension analysis. The scaled model structure was made of a mixture of plaster, sand and water at the ratio determined to yield the best scaled-down strength. Lead wire was used as a substitute for reinforcing bars. The scaled length was at the ratio of 1/10. Selecting the material and scaled factors was aimed at obtaining appropriately scaled-down strength. PFC2D (Particle Flow Code 2-Dimension) employing DEM (Distinct Element Method) was used for the numerical analysis. Blasting demolition of scaled 3-D plain concrete laymen structure was filmed and compared to results of numerical simulation. Despite the limits of 2-D simulation the resulting demolition behaviors were similar to each other. Based on the above experimental results in combination with bending test results of RC beam, numerical analysis was carried out to determine the blasting sequence and delay times. Scaled model test of RC structure resulted in remarkably similar collapse with the numerical results up to 900㎳ (mili-second).

• Journal of the Korea Concrete Institute
• /
• v.24 no.3
• /
• pp.259-266
• /
• 2012

A general earthquake resistant design philosophy of ductile frame buildings allows beams to form plastic hinges adjacent to beam-column connections. In order to carry out this design philosophy, the ultimate bond or shear strength of the beam should be greater than the flexural yielding force and should not degrade before reaching its required ductility. The behavior of RC members dominated by bond or shear action reveals a dramatic reduction of energy dissipation in the hysteretic response due to the severe pinching effects. In this study, a method was proposed to predict the deformability of reinforced concrete members with short-span-to-depth-ratios, which would result in bond failure after flexural yielding. Repeated or cyclic loading produces a progressive deterioration of bond that may lead to failure at lower cyclic bond stress levels. Accumulation of bond damage is caused by the propagation of micro-cracks and progressive crushing of concrete in front of the lugs. The proposed method takes into account bond deterioration due to the degradation of concrete in the post yield range. In order to verify bond deformability of the proposed method, the predicted results were compared with the experimental results of RC members reported in the technical literature. Comparisons between the observed and calculated bond deformability of the tested RC members showed reasonably good agreement.

• Journal of Broadcast Engineering
• /
• v.9 no.1
• /
• pp.43-53
• /
• 2004

In this paper, we propose a robust deinterlacing algorithm which combines edge dependent interpolation (EDI) and global motion compensation (GMC). Generally, EDI algorithm shows a visually better performance than any other deinterlacing algorithm using one field. However, due to the restriction of information in one field, a high duality progressive image from Interlaced sources cannot be acquired by intrafield methods. On the contrary, since algorithms based on motion compensation make use of not only spatial information but also temporal information, they yield better results than those of using one field. However, performance of algorithms based on motion compensation depends on the performance of motion estimation. Hence, the proposed algorithm makes use of mixing process of EDI and GMC. In order to obtain the best result, an adaptive thresholding algorithm for detecting the failure of GMC is proposed. Experimental results indicate that the proposed algorithm outperforms the conventional approaches with respect to both objective and subjective criteria.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.18 no.2
• /
• pp.69-75
• /
• 2009

Daba ecorace of Antheraea mylitta Drury (Lepidoptera: Saturniidae), the semi domesticated Indian tropical tasar silkworm being reared outdoor; the egg and silk yields are dependent of genotype environment interaction. The insufficient maintenance and multiplication of its P4 seed stock need a coherent as well as scientific strategy to safeguard breed potential, being commercially applied ecorace. The sort-out lines of P4 stock studied over five generations highlighting on commercial trait up gradation suits for a tropical crop season, revealed enhanced performance. The line with high pupal parents (T2) shown improved fecundity (12.9%) and the line with high shell parents (T3) recorded higher shell weight (40.0%) and silk ratio (24.1%). While, the line of high pupal female and high shell male (T4) reveal enhancement in fecundity (9.0%), egg hatching (14.1%), shell weight (50.0%), silk ratio (35.2%) and absolute silk yield (52.0%) indicating the need and role of varied basic seed stock lines. The approach could improve economically vital egg fecundity and cocoon shell weights besides balancing them in same line for commercial operation. The progressive show of lines (T1 to T4) along successive generations (G1 to G5), in spite of passing through seed crop (Jul-Aug) and commercial crop (Sep-Nov) seasons emphasize their compatibility. The study infers that the strategic plan of combining preferred parental phenotypes, methodical selection for desired commercial trait(s) through generations with best possible genotype environment interaction has enriched P4 stock with elevation in needy trait(s) besides assuring choice of suitable lines for seasons and regions and timely replenishment of basic seed of Daba ecorace.

• Applied Biological Chemistry
• /
• v.1
• /
• pp.34-36
• /
• 1960

Riboflavin and protein fortified, fermented feed were prepared by cultivating koji mold of riboflavin producibility on sweet potato starch waste with addition of ammonium sulfate. Progressive riboflavin and protein yield were obtained in the feed with additive amount of ammonium sulfate up to 4%. The effect was further enchanced by mixing 1/4 amount of wheat bran and $2{\sim}3%$ calcium superphosphate with starch waste. The best fermented feed were fortified with 15% protein and 2.2 mg % of riboflavin while the starch content was decreased to 13%. The amino acid composition of mold body was studied.

• Journal of Microbiology and Biotechnology
• /
• v.13 no.5
• /
• pp.673-679
• /
• 2003

Glutamine and urea, abundant in body fluids or plasma, yield net ammonium ions upon hydrolysis by ${\gamma}-glutamyl$ transpeptidase (${\gamma}-GTP$) and urease, respectively, and these two enzymes are largely produced from Helicobacter pylori. To investigate bacterial potential of ammonium production, we first quantified those in whole-cell systems and found that the relative ratio of their amounts varied greatly, especially with pH values and the cell's aging. During the H. pylori cultivation, the ratio appeared to be inversely proportional to each other, showing a progressive increase of the ${\gamma}-GTP$ with decreasing of the urease. Under the urease-defective conditions due to low pH or coccoids, the bacterial cells still possessed a considerable amount of ${\gamma}-GTP$, which was found exclusively in the external compartment, therefore, the cell's ammonium production was found to be solely dependent upon glutamine, and the external ammonium concentration was constant without any contribution of urea concentration. Such ammonium constancy would definitely have an adverse effect on the host, because of its absolute requirement for vacuolar degeneration by H. pylori VacA, maximized at approximately 10 mM $NH_4Cl$. It was also found that, by using the metal-saturated membrane vesicles, ammonium ions were likely to be involved in the pH-dependent cation-flux across the H. pylori membrane, where the role of ${\gamma}-GTP$ in ammonium homeostasis around cells was suggested, especially under the hostile conditions against H. pylori.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.230-230
• /
• 2017

About 200 rice varieties for irrigated and rainfed lowland ecosystems were released in the Philippines, which were bred for improving yield under favorable conditions. Root plasticity plays key roles in maintaining crop productivity under abiotic stressed conditions. We hypothesized that some of these varieties possess root plasticity traits in response to water stressed conditions. This study aimed to evaluate the root system development and dry matter production of 14 randomly selected rice varieties (6 irrigated lowland and 9 rainfed varieties) under progressive drought (PDR) and soil moisture fluctuations (SMF) stress conditions. Two experiments were done in rootbox and line source sprinkler systems (LSS). Each of the varieties was subjected to well-watered (WW), PDR and SMF conditions during vegetative stage in rootbox system while the same genotypes were subjected to different intensities of drought stress under LSS. Under rootbox system, PDR and SMF significantly reduced shoot dry matter production in all varieties relative to their WW controls. Among varieties, NSIC Rc238 (irrigated lowland) showed the least reduction in shoot dry weight (SDW) in both PDR (by 11.8%) and SMF (by 26.9%) conditions. Less reductions in SDW of NSICRc238 were partially attributed to the promotion of L-type lateral roots, thus increasing total lateral root length by 24.2% and 30.7% under PDR and SMF, respectively. In LSS, SDW of NSIC Rc238 under mild drought stress (16-21% soil moisture content (SMC) had 31.8% reduction relative to its WW control (${\geq}22%SMC$) and had lower sensitivity drought index. Compared with the IR64 susceptible check and NSIC Rc9 tolerant check, NSIC Rc238 had higher SDW by 90.8% and 38.6%, respectively. Furthermore, no rainfed lowland varieties included in the experiment performed well under different water stress treatments. The results implied that some other irrigated lowland rice varieties may also possess drought dehydration avoidance root plasticity traits under water-stressed growing environments.

• Journal of the Korean GEO-environmental Society
• /
• v.11 no.8
• /
• pp.49-55
• /
• 2010

Safety estimation of the pillar between parallel tunnels are very important considering stress concentration in case the piller width is not enough to secure the stability. Pillar width needs to be determined properly because of the progressive failure-risk of pillar due to stress-concentration. In this research, the effect of element size in numerical analysis was evaluated based on that yield pillar's stability and proposed systematic analysis about pilar's stability examination. In consequence of it, element size does not give any effect on intensity stress ratio. On the other hand, the analysis using the smaller element size results in lower safety factor in strength reduction technique. In case of the weathered re.k on the main ground layer, the analysis of result was not reliable. In conclusion, the smaller element size is, the more stable factor is.

• Proceedings of the Korea Society of Costume Conference
• /
• 2001.08a
• /
• pp.81-81
• /
• 2001

R.O.C. has experienced successively the development of previous dynasties that creates out the unique traditional culture of each stage. The Chinese nation is not a one-fold race; each dynasty absorbs the culture of the outside race. It is Tang Dynasty blends mutually however yield unusually brilliant results. The Tang Dynasty's national strength is forceful and the economy is prosperous. Above all, social custom and current of thought both break the constraint of previous dynasties' conservative thinking and keep positive and aggressive. While in the contact with extraterritorial culture, not only changes the feminine social status, but also produces unprecedented innovation and reform on the feminine dress. The Tang Dynasty's varied feminine suit is affected by the western regions of China culture, such as expose of chest, low collar, short top garment and skirt with narrow sleeves or wide sleeves, sleeve gown with plate collar or turndown collar, man's wear, and military dress, etc. An epoch can be known by Tang Dynasty feminine dress's special features, for example, the make-up of Tang-Shien-lon's Uan-Ho period presents dress style of late Tang days. However, the Chinese people compete mutually pursuing the strange costume, and accepting different cultural incitement This reveals that the changes of popular culture would result in the big transform of the Tang's dress style. This paper studies inherit of Tang Dynasty's culture and east-spread of the western regions of China culture. While understanding the Tang's favor in the western regions of China customs, all follow the western regions of China without exception, such as dance music, painting, dress, food, amusement, etc. Because of emperor's progressive race policy and forgiveness attitude to the foreign tribe that makes Tang Dynasty's feminine dress much easier to accept and blend the special features of the foreign tribe culture. While joined with west culture, and pick the dress's essence of the western regions of China, the original possessed of culture consciousness and esthetic sense improve and create their own dress, as well as enrich more inner part of dress art and the spirit.