• Journal of the Korean Society for Heat Treatment
• /
• v.3 no.2
• /
• pp.10-19
• /
• 1990

The tempering behavoirs of 0.45% carbon steel treated by automatic progressive high frequency induction hardening equipment have been investigated. In order to examine the correlation of hardness with both tempering temperature and time, simple regression analysis has been made using the statistical quality control package. The maximum surface hardness value of induction hardened zone and its effective hardening depth have been determined to be Hv 810 and 0.76mm, respectively. The hardness obtained after tempering has been shown to vary lineary with tempering time at six different temperatures. The activation energies during tempering have been calculated to be 25.34kcal/mole, 32.73kcal/mole and 49.24kcal/mole for HRcs 60, 50 and 40, respectively, showing that tempering process occurs by a complex mechanism, The tempering hardness equation of $H=90.113{\sim}4.531{\times}10^{-3}$ [T(11.996+log t)] has proved to be in a reasonably good agreement with experimently determined data and it is also expected to be useful for the determination of tempering treatment conditions to obtain a required hardness value.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.19 no.2
• /
• pp.110-117
• /
• 1999

In order to ultrasonically evaluate creep cavities pure copper samples were subjected to creep test and their microstructures were examined. Ultrasonic velocities. frequency-dependent magnitude spectra and attenuations were measured on a series of copper samples obtained from the different stages of creep test. Velocities measured in three directions with respect to the loading axis decreased and their anisotropy increased as a function of the creep-induced porosity. The anisotropic behavior could be attributed to the progressive change of pore shape and preferred orientation as the creep advanced. The 2% porosity by volume decreased the longitudinal and shear wave velocities by 11% and 4%, respectively. Furthermore, both velocities decreased nonlinearly with the porosity. As the creep damage developed, the magnitude spectra lost high frequency components and their central frequencies shifted to lower values. The attenuation showed almost linear behavior in the frequency range used. Normalized velocity, central frequency shift and attenuation slope were selected as nondestructive evaluation parameters. These results were presented and showed good relations with the porosity content.

• Animal Bioscience
• /
• v.35 no.2
• /
• pp.166-176
• /
• 2022

Objective: Sperm is particularly susceptible to reactive oxygen species (ROS) stress. Glutathione (GSH) is an endogenous antioxidant that regulates sperm redox homeostasis. However, it is not clear whether boar sperm could utilize cysteine for synthesis GSH to protect sperm quality from ROS damage. Therefore, the present study was undertaken to elucidate the mechanism of how cysteine is involved in protecting boar sperm quality during liquid storage. Methods: Sperm motility, membrane integrity, lipid peroxidation, 4-hydroxyIlonenal (4-HNE) modifications, mitochondrial membrane potential, as well as the levels of ROS, GSH, and, ATP were evaluated. Moreover, the enzymes (GCLC: glutamate cysteine ligase; GSS: glutathione synthetase) that are involved in glutathione synthesis from cysteine precursor were detected by western blotting. Results: Compared to the control, addition of 1.25 mM cysteine to the liquid storage significantly increased boar sperm progressive motility, straight-line velocity, curvilinear velocity, beat-cross frequency, membrane integrity, mitochondrial membrane potential, ATP level, acrosome integrity, activities of superoxide dismutase and catalase, and GSH level, while reducing the ROS level, lipid peroxidation and 4-HNE modifications. It was also observed that the GCLC and GSS were expressed in boar sperm. Interestingly, when we used menadione to induce sperm with ROS stress, the menadione associated damages were observed to be reduced by the cysteine supplementation. Moreover, compared to the cysteine treatment, the γ-glutamylcysteine synthetase (γ-GCS) activity, GSH level, mitochondrial membrane potential, ATP level, membrane integrity and progressive motility in boar sperm were decreased by supplementing with an inhibitor of GSH synthesis, buthionine sulfoximine. Conclusion: These data suggest that boar sperm could biosynthesize the GSH from cysteine in vitro. Therefore, during storage, addition of cysteine improves boar sperm quality via enhancing the GSH synthesis to resist ROS stress.

• Journal of Animal Reproduction and Biotechnology
• /
• v.37 no.3
• /
• pp.193-201
• /
• 2022

Subgroups of sperm which share similar motility features documented in mammals indicate between-subject variations that might be related to fertilizing potential of the respective ejaculates. The objectives of this study were to define subpopulations of motile sperm in Gyr falcon semen using kinematic parameters driven by Computer Assisted Semen Analysis (CASA) and to investigate the subject-related variations in these subpopulations. A total of 24 fresh ejaculates from 6 falcons were used to assign each of the 20473 sperms into 3 subpopulations by a multivariate cluster analysis. The proportion of sperms in different sub-populations were compared among subjects by a generalized linear model and repeatability of sperm frequency in different subpopulations was investigated by corelation analysis. The resulting 3 categories of sperm indicated significant differences in all kinematic parameters (p < 0.05). Subpopulation 1 (15.91%) contained sperms with the highest velocity and progressiveness of movement trajectory while subpopulation 3 (6.4%) included the least progressively motile sperms. Proportion of rapid and medium progressive sperm were consistently higher in the ejaculate of three falcons compared to the two other birds which also had the highest proportion of slow non-progressive sperms (p < 0.05). Respective proportion of sperms in each subpopulations indicated significant repeatability over multiple measurements (p < 0.05). In conclusion, subpopulations of motile sperm in Gyr falcon can be identified using kinematic parameters generated by CASA. Individual differences in the proportion of these subpopulations might have potential application for identifying the males with higher fertilizing capacity.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.26 no.3
• /
• pp.48-54
• /
• 2022

This research describes a quantitative procedure used to estimate the effect of concrete cracking on stiffness degradation of concrete shear walls and provides analytical references for the seismic design of concrete shear walls. As preliminary research on the seismic response of concrete shear walls, nonlinear transient analysis was performed with commercial FE software. The study presents the nonlinear time history analysis results in terms of concrete damage and cracking behavior induced by seismic input motions. By varying the input motions, concrete strength and shear wall thickness, the seismic responses of a shear wall were examined with nonlinear time history analysis, and the progressive cracking behavior and corresponding hysteresis loop were described. Based on the analysis results, frequency and stiffness degradation of the shear wall from progressive concrete damage and cracking were captured with respect to the seismic levels. The results of this study suggest that stiffness degradation from concrete cracking should be appropriately considered when determining the seismic capacity of RC shear wall structures.

• Proceedings of the KIEE Conference
• /
• 2002.07b
• /
• pp.604-606
• /
• 2002

Air-cored machines have a higher efficiency with high frequency. speed than iron-cored machine because of the iron losses which may produce too much heat as well as the copper losses occurred in the rotor winding. But air-cored machine is lower flux than iron machine. The nature of the machine from 'iron-cored' to 'air-cored' is a progressive feature in the machines. A general analysis of the fields that is applicable to all configurations is presented. Slotless machines have been applied for no ripple induced voltage. In this paper, slotless mahcines equipped with internal 4-pole amature winding. This paper pay attention to analyze flux density of air-cored and iron-cored synchrous machine analytically and compare flux density of aired-cored machine to iron-cored machine.

• Journal of Families and Better Life
• /
• v.27 no.2
• /
• pp.45-61
• /
• 2009

The purpose of this study was to develop an understanding of older consumers' lifestyle, and to provide the basic information for developing silver commodities and, in turn, to stimulate the silver industry which has received attention as a next-generation industry. The study divided elderly consumers into four lifestyle categories and analyzed the difference in demographic characteristics among these categories as well as differences in demand for silver products. Data were collected with questionnaire and analyzed with frequency analysis, factor analysis, K-means cluster analysis, one-way ANOVA, and a $x^2$ test using SPSS 15.0. Four different lifestyles categories were identified among elderly consumers : conservative and stability oriented (22 persons, 33.3% of the sample), progressive and relation oriented (22 persons, 15.0%), reality adapted (52 persons, 35.4%), and traditional (24 persons, 16.4%). The demand for silver products demands was significantly different among elderly consumers in the four different lifestyle groups.

• Journal of the Korean Society of Laryngology, Phoniatrics and Logopedics
• /
• v.29 no.1
• /
• pp.19-23
• /
• 2018

Ultrasonography has increasingly moved from being a modality confined to the radiology department to an active diagnostic and therapeutic aid available to the head and neck at the point of patient care. However, the application of ultrasonography to the laryngeal disorder is very rare due to progressive age-related ossification of laryngeal cartilage and the presence of air in the lumen, which contribute to difficult conditions for transmission of the ultrasonic waves. The observation about the movements of larynx or surrounding structures is important to understand the physiology of phonation or swallowing and to diagnose the disease. Ultrasonography is a noninvasive and safe imaging technique that can be used to investigate the anatomic structures of the head and neck. Recently, the development of high-frequency ultrasonography makes it possible to apply the ultrasound in the evaluation of larynx.

• Korean Institute of Interior Design Journal
• /
• no.33
• /
• pp.54-61
• /
• 2002

The purpose of this study was to identify the preference of interior design, design style and color, according to consumers' life style. Data were collected from March 7th. 2002. to March 22nd. 2002 using the questionnaire. The subjects were 228 adults and frequency, percentage, mean, cross tab, F-test, factor analysis, and cluster analysis were used for data analysis. The major results of this study were: 1) The types of life style were 3: regular family oriented type, progressive fashionable type, and conservative self-manageable type. 2) This study revealed relative difference in design style and color preference according to consumers' life style. Therefore, the type of life style could be used as powerful variable in interior design and marketing of allied industries.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.54 no.11
• /
• pp.673-679
• /
• 2005

This Paper presents the 3D wavelet transformation based video compression system, which possesses the capability of progressive transmission by increasing resolution and increasing rate for multimedia applications. The 3D wavelet packet based video compression system removes the temporal correlation of the input sequences using the motion compensation filter and decomposes the spatio-temporal subband using the spatial wavelet packet transformation. The proposed system allocates the higher bit rate to the low frequency image of the 3D wavelet sequences and improves the 0.49dB PSNR performance of the reconstructed image in comparison with that of H.263. In addition to the limitation on the propagation of the motion compensation error by the 3D wavelet transformation, the proposed system progressively transmits the input sequence according to the resolution and rate scalability.