• 터널과지하공간
• /
• 제15권4호
• /
• pp.250-263
• /
• 2005

암반 내 형성된 과도한 초기응력장은 굴착 공동 주변에 점진적이고 국부적인 취성파괴를 유발시킴으로서 시공의 안정성과 경제성을 확보하는데 장애 요인으로 작용할 수 있다. 이 논문에서는 응력 수준 증가에 따른 공동 주변의 취성파괴 거동 특성을 파악하기 위해 축소된 원형 터널 공시체를 이용한 이축압축시험과 입자 결합 모델을 이용하여 개별요소법의 일종인 $PFC^{2D}$ 해석에 의한 연구를 수행하였다. 실내 이축압축시험을 통해 취성파괴의 발생 영역과 형태 면에서 실제 암반 공동 주변에서 발생된 파괴 특성과 유사한 파괴 거동을 모사할 수 있었다. 응력 강도비 증가에 따라 진행된 균열 발전단계를 미소파괴음 특성 변수들에 대한 상세 분석을 통해 평가하였다. $PFC^{2D}$ 해석을 통해 공동 주변에서의 미세 균열 발생과 전파 과정을 성공적으로 가시화하였으며 이를 통해 이축 압축시험 결과의 신뢰성과 시험방법의 적정성을 확인할 수 있었다.

• 한국지반공학회논문집
• /
• 제19권1호
• /
• pp.121-129
• /
• 2003

층상점토지반의 극한지지력에 대하여 수치해석적 방법을 이용하여 거친 띠기초, 미끈한 띠기초에 대하여 해석을 수행하였다. 유한요소법과 유한차분법(FLAC)을 사용하여 층상점토 기초지반의 파괴거동 및 전반적인 하중-변위관계, 극한지지력에 대하여 수치해석적 방법으로 검토하였다. 해석된 결과를 분석하여보면, 이러한 수치해석적 방법을 통해서 층상점토 지반의 극한지지력, 진행성 파괴거동을 충분히 검토할 수 있음을 보여주었다. 그러나 정도가 높은 해석결과를 얻기 위해서는 수치해석에 큰 영향을 미치는 조절요인(항복함수선택, 해석증분수)과 두 가지 이상의 수치해석적 방법에 의하여 해석결과를 비교 분석하는 것이 필요하다.

• 국제초고층학회논문집
• /
• 제7권4호
• /
• pp.375-387
• /
• 2018

This paper presents a review on progressive collapse mechanism of steel framed buildings exposed to fire. The influence of load ratios, strength of structural members (beam, column, slab, connection), fire scenarios, bracing systems, fire protections on the collapse mode and collapse time of structures is comprehensively reviewed. It is found that the key influencing factors include load ratio, fire scenario, bracing layout and fire protection. The application of strong beams, high load ratios, multi-compartment fires will lead to global downward collapse which is undesirable. The catenary action in beams and tensile membrane action in slabs contribute to the enhancement of structural collapse resistance, leading to a ductile collapse mechanism. It is recommended to increase the reinforcement ratio in the sagging and hogging region of slabs to not only enhance the tensile membrane action in the slab, but to prevent the failure of beam-to-column connections. It is also found that a frame may collapse in the cooling phase of compartment fires or under travelling fires. This is because that the steel members may experience maximum temperatures and maximum displacements under these two fire scenarios. An edge bay fire is more prone to induce the collapse of structures than a central bay fire. The progressive collapse of buildings can be effectively prevented by using bracing systems and fire protections. A combination of horizontal and vertical bracing systems as well as increasing the strength and stiffness of bracing members is recommended to enhance the collapse resistance. A protected frame dose not collapse immediately after the local failure but experiences a relatively long withstanding period of at least 60 mins. It is suggested to use three-dimensional models for accurate predictions of whether, when and how a structure collapses under various fire scenarios.

• Earthquakes and Structures
• /
• 제20권1호
• /
• pp.1-12
• /
• 2021

The occurrence of progressive collapse induced by the removal of the vertical load-bearing element in the structure, because of fire or earthquake, has been a significant challenge between structural engineers. Progressive collapse is defined as the complete failure or failure of a part of the structure, initiating with a local rupture in a part of the building and can threaten the stability of the structure. In the current study, the behavior of the structures equipped with a cylindrical friction damper, when the vertical load-bearing elements are eliminated, is considered in two cases: 1-The load-bearing element is removed under the gravity load, and 2-The load-bearing element is removed due to the earthquake lateral forces. In order to obtain a generalized result in the seismic case, 22 pair motions presented in FEMA p 695 are applied to the structures. The study has been conducted using the vertical push down analysis for the case (1), and the nonlinear time-history analysis for the second case using OpenSEES software for 5,10, and 15-story steel frames. Results indicate that, in the first case, the load coefficient, and accordingly the strength of the structure equipped with cylindrical friction dampers are increased considerably. Furthermore, the results from the second case demonstrate that the displacements, and consequently the forces imposed to the structure in the buildings equipped with the cylindrical friction damper substantially was reduced. An optimum slip load is defined in the friction dampers, which permits the damper to start its frictional damping from this threshold load. Therefore, the optimum slip load of the damper is calculated and discussed for both cases.

• Composites Research
• /
• 제26권2호
• /
• pp.91-98
• /
• 2013

복합재 이중-겹침 볼트 체결부의 파손을 예측하기 위해 손상계수를 고려한 강성저하 방법과 Hashin의 3차원 파손판정식에 근거한 3차원 유한요소해석 방법을 제안하였다. 기지 혹은 면내(In-plane) 전단 손상을 고려하기 위해 손상변수를 이용하는 Ladeveze 이론을 섬유방향 강성저하와 연계하여 사용하였고, 수지 압축/전단, 수지 인장/전단, 섬유압축, 섬유 인장 등 4가지 파손모드를 고려하였다. 상업용 유한요소 프로그램인 ABAQUS를 이용하여 마찰력과 볼트 체결력을 고려하였고, 강성저하모델 처리를 위해 ABAQUS의 사용자 정의 부프로그램을 이용하였다. 제안된 유한요소해석 방법을 검증하기 위해 복합재 이중겹침 볼트 체결부 시험 결과와 파손강도를 비교한 결과 7~16% 오차를 보임을 확인하였다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1991년도 추계학술발표회 논문집 지반공학에서의 컴퓨터 활용 COMPUTER UTILIZATION IN GEOTECHNICAL ENGINEERING
• /
• pp.75-86
• /
• 1991

본 논문에서는 지반공학 소식 창간호에 게제된 Carsington 댐의 파괴에 관하여 고찰하였으며, 해석 결과에 근거하여 댐 파괴요인과 그 영향에 관하여 논술하였다. 본 해석에서는 파괴후의 현장조사에서 나타난 황색점토층 내에 이미 존재하던 전단변위에 대한 영향과 이 연약점토층을 통과하는 파괴면의 진행성 파괴상황을 중점적으로 분석하였다. 가능한 현장조건을 대표하는 수치로 변화시켜 각 조건별 안전도 계산치를 비교하고, 댐 파괴시의 평균강도를 가장 잘 대표하는 현장 지반조건을 평가하였다.

• 대한한의학회지
• /
• 제21권4호
• /
• pp.276-285
• /
• 2000

Paraquat is a very potent herbicide which causes fatal toxicity when ingested, and there is no specific antidote against it. Human ingestion induces acute renal failure, hepatic dysfunction and progressive respiratory failure with high mortality rate. Clinical investigation and medical treatment were done on two cases of acute renal failure caused by paraquat poisoning admitted to the Department of Internal Medicine, Wonkwang University Oriental Chonju Medical Hospital. We report two cases of patients who survived after acute paraquat intoxication, by means of oriental medicine such as Gamdutang, a typical antidote of toxins, chinese ink as an absorbent and burned powder of Rhei Radix et Rhizoma for laxative and so on, western medicine such as gastric lavage, diuretics and fluid therapy. We suggest more experiments and studies related to such treatment for paraquat poisoning be conducted.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2002년도 추계학술발표대회 논문집
• /
• pp.92-95
• /
• 2002

A nonlinear finite element method is presented to evaluate the torsional buckling moment and failure of composite laminated cylinders. For the progressive failure analysis, the complete unloading method is used based on the maximum stress failure criteria. An arc-length method is incorporated to trace the postbuckling equilibrium path. Present finite element method is verified by the existing experimental and analytical results. The results of the parametric study show that the torsional buckling moments are sensitive to the geometric change, but are not much affected by the lay-up angle. All cylinders tested numerically show the unstable torsional buckling, and therefore the torsional buckling always leads to the catastrophic failure.

• 한국항공운항학회지
• /
• 제27권2호
• /
• pp.9-15
• /
• 2019

The initial buckling of thin walled structures does not result in immediate failure. This post buckling capability is used to achieve light weight design, and final failure of thin walled structure is called crippling. To predict the failure load, empirical methods are often used for thin walled structures in design stage. But empirical method accuracy depend on geometry. In this study, experimental, empirical and numerical study of the crippling behavior of I-section beam made of carbon-epoxy are performed. The progressive failure analysis model to simulate the crippling failure is evaluated using the test results. In this study, commercial software LS-DYNA is utilized to compute the collapse load of composite specimen. Six kinds of specimens were tested in axial compression where correlation between analytical and experimental results has performed. From the results, we have partially conclude that the flange width-to-thickness ratio is found to influence the accuracy of empirical and numerical method.

• Geomechanics and Engineering
• /
• 제12권6호
• /
• pp.919-933
• /
• 2017

A series of Brazilian tests under diameter compression for disc specimens was carried out to investigate the strength and failure behavior by using acoustic emission (AE) and photography monitoring technique. On the basis of experimental results, load-displacement curves, AE counts, real-time crack evolution process, failure modes and strength property of granite specimens containing two pre-existing holes were analyzed in detail. Two typical types of load-displacement curves are identified, i.e., sudden instability (type I) and progressive failure (type II). In accordance with the two types of load-displacement curves, the AE events also have different responses. The present experiments on disc specimens containing two pre-existing holes under Brazilian test reveal four distinct failure modes, including diametrical splitting failure mode (mode I), one crack coalescence failure mode (mode II), two crack coalescences failure mode (mode III) and no crack coalescence failure mode (mode IV). Compared with intact granite specimen, the disc specimen containing two holes fails with lower strength, which is closely related to the bridge angle. The failure strength of pre-holed specimen first decreases and then increases with the bridge angle. Finally, a preliminary interpretation was proposed to explain the strength evolution law of granite specimen containing two holes based on the microscopic observation of fracture plane.