• 제목/요약/키워드: profiles

검색결과 8,530건 처리시간 0.035초

SMOKE 모델의 입력 모듈 변경에 따른 영향 분석 (Assessment of Changed Input Modules with SMOKE Model)

  • 김지영;김정수;홍지형;정동일;반수진;이용미
    • 한국대기환경학회지
    • /
    • 제24권3호
    • /
    • pp.284-299
    • /
    • 2008
  • Emission input modules was developed to produce emission input data and change some profiles for Sparse Matrix Operator Kernel Emissions (SMOKE) using Clean Air Policy Support System (CAPSS)'s activities and previous studies. Specially, this study was focused to improve chemical speciation and temporal allocation profiles of SMOKE. At first, SCC cord mapping was done. 579 SCC cords of CAPSS were matched with EPA's one. Temporal allocation profiles were changed using CAPSS monthly activities. And Chemical speciation profiles were substituted using Kang et al. (2000) and Lee et al. (2005) studies and Kim et al. (2005) study. Simulation in Seoul Metropolitan Area (Seoul, Incheon, Gyeonggi) using MM5, SMOKE and CMAQ modeling system was done for effect analysis of changed input modules of SMOKE. Emission model results adjusted with new input modules were slightly changed as compared to using EPA's default modules. SMOKE outputs shows that aldehyde emissions were decreased 4.78% after changing chemical profiles, increased 0.85% after implementing new temporal profiles. Toluene emissions were decreased 18.56% by changing chemical speciation profiles, increased 0.67% by replacing temporal profiles as well. Simulated results of air quality were also slightly elevated by using new input modules. Continuous accumulation of domestic data and studies to develop input system for air quality modeling would produce more improved results of air quality prediction.

대학생 창업교육동기에 대한 사람중심접근법 : 잠재프로파일 유형에 따른 창업의도 및 창업유형 (A latent Profile Analysis of Students' Learning Motivation Profiles on Entrepreneurial Educational Motivation and Entrepreneurial Intentions and Type of Entrepreneurship)

  • 오현성;변지연;김준수
    • 한국콘텐츠학회논문지
    • /
    • 제20권9호
    • /
    • pp.365-379
    • /
    • 2020
  • 본 연구는 Houle(1961)의 교육참여동기 세 가지 유형(학습지향성, 활동지향성, 목표지향성)을 중심으로 창업교육동기 잠재프로파일의 정량적, 질적 유형 및 특징을 분석하고 창업의도와 창업유형의 차이를 살펴보는데 목적이 있다. 이를 위해 대학생 614명을 중심으로 잠재프로파일 분석(Latent Profile Analysis: LPA)을 실시하였으며, 창업교육동기 프로파일 1(표류자), 프로파일 2(정체형), 프로파일 3(소심가), 프로파일 4(추종자), 프로파일 5(선도자)를 도출하였다. 프로파일에 따른 창업의도는 5개 프로파일 중 프로파일 5, 프로파일 4, 프로파일 3의 순으로 높게 나타났다. 또한 프로파일 5와 프로파일 4 그룹의 창업 선호도가 높으며, 프로파일의 창업유형은 개인창업과 공동창업이 유의한 것으로 나타났다. 잠재프로파일 분석방법을 통해 대학생 창업연구에 새로운 방법론적 패러다임을 제시하고, 도출된 5개 프로파일에 따른 창업의도 및 창업유형 분석을 통해 창업교육의 실무적인 시사점을 제시하고자 한다.

Clinical Characteristics and Gustatory Profiles in Patients with Subjective Taste Complaints

  • Kim, Seo-Yeong;Byun, Jin-Seok;Jung, Jae-Kwang;Choi, Jae-Kap
    • Journal of Oral Medicine and Pain
    • /
    • 제44권3호
    • /
    • pp.103-111
    • /
    • 2019
  • Purpose: Patients with taste complaints presenting with various abnormal perceptions and alterations in gustatory function are often encountered in dental clinics. Since taste perception is thought to be influenced by numerous factors including neurological and psychological factors, the gustatory profiles of patients complaining of taste abnormalities should be very different. However, the gustatory profiles based on the clinical subtypes of taste complaints have not been fully studied. This study aimed to better understand the gustatory profiles depending on the clinical subtypes of taste complaints. Methods: Clinical data from 169 patients with complaints of altered taste were retrospectively collected to analyse their clinical and gustatory profiles. These complaints were subdivided into hypergeusia, hypogeusia, and dysgeusia for each taste quality according to the clinical types of these complaints. The gustatory profiles were then established by analysing the detection and recognition thresholds for each taste quality depending on the clinical subtypes of taste complaints. Results: Clinical analysis revealed that patients with taste complaints had widely diverse clinical profiles. There were significant differences between males and females with taste complaints in the prevalence rates of symptoms like dry mouth, tongue coating, and burning sensation. While hypogeusia (76.3%) was the most frequent type of taste complaint, it was revealed that the taste thresholds were not always consistent with the patient's description of gustatory symptoms. Conclusions: Patients with taste complaints exhibited diverse clinical profiles with sex differences. Considering the diversity of the taste complaints, the quantitative gustatory testing methods can be valuable to differentially evaluate the presence and intensity of altered taste in patients with these complaints.

Iso-catalase Profiles of Deinococcus spp.

  • Soung, Nak-Kuyn;Lee, Young-Nam
    • BMB Reports
    • /
    • 제33권5호
    • /
    • pp.412-416
    • /
    • 2000
  • The obligate aerobic Deinococcus are highly resistant against lethal effect of UV-and ionizing-radiation. Only five mesophilic Deinococcus species, i. e. D. radiodurans, D. radiophilus, D. proteolyticus, D. radiopugnans, and D. grandis are known. Since an indispensable role of catalase has been suggested in protecting cells against oxidative stress and UV radiation, Deinococcal catalase activity of each species and electrophoretic profiles of catalases were investigated on gel. Total catalase activity was varied among the species in the aerobically grown culture at stationary phase. The occurrence of multiple forms of catalases with different molecular weights in four species of Deinococcus and of a single catalase in D. radiopugnans suggests that each species shows the unique catalase profiles on gel. Some Deinococcal catalases also exhibit peroxidase activity. Since Deinococcus spp. are less-distinct to each other in their morphology, biochemical and physiological properties, the catalase profiles on PAGE would be useful in identifying the species of Deinococcus.

  • PDF

지로터 펌프/모터의 치형 설계 프로그램 개발에 관한 연구 (A Study on Tooth Design Program Development of Gerotor Pump/Motor)

  • 장주섭;이종원;한동철;조명래
    • Tribology and Lubricants
    • /
    • 제12권3호
    • /
    • pp.100-106
    • /
    • 1996
  • Gerotor pumps and motors are widely used in lubrication and hydraulic actuator systems. Compared with internal gear pumps and motors, they have many advantages. However, the gerotor profiles have not been suff'lciently analyzed theoretically. Therefore, it is very difficult for designer to decide the specifications of the gemtor profiles, and calculation of flow rate and minimum distance of clearance in the contact point of inner and outer rotor is not yet confirmed. In this paper, when we design inner and outer rotor concurently, we have analyzed the gerotor profiles and displayed the calculated results such as flow rate, minimum distance between inner and outer rotor and gerotor profiles.

용접 비드 형상을 이용한 용접 시편의 피로수명 예측 연구 (A Study on the Fatigue Life Estimation Using Butt Weld Bead Profiles)

  • 김재훈;구병춘
    • 한국철도학회논문집
    • /
    • 제7권2호
    • /
    • pp.125-129
    • /
    • 2004
  • This study investigates the fatigue lift estimation of butt weld specimen for the railway vehicle by examining butt weld bead profiles. The butt weld beads, which are welded by semi-robot method, have non-uniform bead profiles described by $\theta$, p and h. The stress concentration factors, K$\_$t/, are changed by different $\theta$, p and h from 1.395 to 2.863. Hence, the sensitivity of K$\_$k/ is changed by each $\theta$, p and h. As $\theta$ becomes lower and p and h become higher, K$\_$t/ increases. The fatigue life can be estimated very closely for the AAY specimens without residual stress using only butt weld bead profiles. But, for the AAN specimens with residual stress, the fatigue life must be estimated by considering both the weld bead profiles and the residual stress data.

에너지 효율적인 속도 프로파일 생성을 위한 Simulink 기반 열차 성능 시뮬레이션 (A Train Performance Simulation using Simulink for Generating Energy-efficient Speed Profiles)

  • 강문호;한문섭
    • 전기학회논문지
    • /
    • 제59권10호
    • /
    • pp.1816-1822
    • /
    • 2010
  • In this research TPS (Train Performance Simulation) blocks are designed using Simulink and applied to generate speed profiles for energy-efficient train operation. With a train operation mode of maximum powering, coasting, and maximum breaking, a breaking point is calculated from forward-backward running profiles. Then, GA (Genetic Algorithm) is used to solve a running time constraint, and a coasting point is produced from the searching process of GA. With the breaking point and the coasting point a speed profile is plotted. Train performance under a speed limit and gradient variations is simulated and resultant speed profiles are analyzed.

한우(韓牛)에서 혈장(血漿) progesterone 농도측정(濃度測定)에 의한 춘기발동기(春機發動機)의 확인(確認) (The use of plasma progesterone profiles to determine the puberty in Korean native heifers)

  • 강병규;최한선;손창호;서국현
    • 대한수의학회지
    • /
    • 제33권3호
    • /
    • pp.525-530
    • /
    • 1993
  • Studies were conducted in 13 Korean native heifers to determine the puberty based on plasma progesterone profiles and estrus observations. Blood samples for determination of progesterone profiles were collected from jugular vein twice a week from 8 to 24 months of age, and all heifers werce observed for estrous behaviours twice a day. Heifers attained puberty at 11.3 months of age and 188.5kg body weight as determined by progesterone profiles, whereas the first estrous behaviours were observed at 14.2 months of age and 215.4kg body weight. This result indicates that determination of plasma progesterone profiles could be utilized for monitoring the puberty in Korean native heifers, and one or more ovulations occurred before pubertal heifers showed overt estrous behaviours.

  • PDF

실리콘에 MeV로 이온주입된 AS 와 Sb의 profile과 열처리에 의한 이온의 거동에 관한 연구 (A study of profiles and annaealing behavior of As and Sb by MeV implantation in silicon)

  • 정원채
    • 전자공학회논문지D
    • /
    • 제35D권3호
    • /
    • pp.46-55
    • /
    • 1998
  • This stud demonstrates the profiles of heavy ions (As, Sb) in silicon by high energy (1~10 MeV) implantation. Implanted profiles were measured by SIMS (Cameca 4f) and compared with simulation results (TRIM) program and analytical description method using Pearson function). The experimental results have a little bit deviation with simulation data in the case of As high energy implatation. But in the case of Sb, the experimental results are in good agreement with TRIM data. SIMS profiles are perfectly fitted with a analytical description method only using one pearson function in Sb implantation. but in the case of As, fitted profilesshow with a little bit deviations by channeling effects of SIMS profiles. Thermal annealing for electrical activation of implanted ions was carried out by furnace annealing and RTA(Rapid Thermal Annealing). Concentration-depth profile after heat treatement were measured by SR(Spreading Resistance) method.

  • PDF

Observed characteristics of tropical cyclone vertical wind profiles

  • Giammanco, Ian M.;Schroeder, John L.;Powell, Mark D.
    • Wind and Structures
    • /
    • 제15권1호
    • /
    • pp.65-86
    • /
    • 2012
  • Over the last decade substantial improvements have been made in our ability to observe the tropical cyclone boundary layer. Low-level wind speed maxima have been frequently observed in Global Positioning System dropwindsonde (GPS sonde) profiles. Data from GPS sondes and coastal Doppler radars were employed to evaluate the characteristics of tropical cyclone vertical wind profiles in open ocean conditions and at landfall. Changes to the mean vertical wind profile were observed azimuthally and with decreasing radial distance toward the cyclone center. Wind profiles within the hurricane boundary layer exhibited a logarithmic increase with height up to the depth of the wind maximum.