• Asian-Australasian Journal of Animal Sciences
• /
• v.16 no.6
• /
• pp.794-799
• /
• 2003

A study was conducted on 2102 records of 808 crossbred cows of various genetic groups maintained under 'All India Coordinated Research Project on Cattle' at C C S Haryana Agricultural University, Hisar, over 25 years period (1968-1993) with an objective to assess and compare the amount of percent improvement and heterotic effect for different performance traits in various genetic groups produced under this programme. Survivability sharply and significantly declined from 1/2 to $3/4^th$ bred and further from $3/4^th$ to inter-se bred. This may be due to periodic and management differences in addition to the higher level of exotic inheritance and decreased heterotic effect over the filial generations. Jersey and Holstein Friesian crosses among 1/2 breds and their 50% inheritance among $3/4^th$ and inter-se breds had highest improvement and heterosis in reproduction and production traits respectively. Among inter se bred genetic groups, BFH (I) had no recombination loss in SP and CI, while FJH (I), JFH (I) and FBH (I) had on recombination loss in AFC, LY, LL and PE. The crossbreeding of zebu cows with exotic breeds brings about spectacular improvement in comparison to the performance of zebu breed, while conventional selection over several generation would lead to only modest improvement. In addition to additive effect, there was sufficient heterosis in Jersey crosses for reproduction and Holstein Friesian crosses for production performance. Three breed crosses with exotic inheritance between 50 and 75 percent incorporating genes (25 to 50%) from both of these breeds is the best combination for stabilization.

• Animal Bioscience
• /
• v.36 no.1
• /
• pp.98-107
• /
• 2023

Objective: Current quail production is configured as an economic activity in scale. Advancements in quail nutrition have been limited to areas such as breeding and, automation of facilities and ambience. The objective of this study was to evaluate the performance responses, liver and oviduct morphometry, and liver histology of Japanese laying quails subjected to different levels of nitrogen-corrected apparent metabolizable energy (MEn). Methods: A completely random design was used that consisted of nine levels of MEn, six replicates, and five hens per cage with a total of 270 quails. The experimental period lasted for 10 weeks. The variables of performance were subjected to analysis of variance and then regression analysis using the broken-line model. The morphometric and histological variables were subjected to multivariate exploratory techniques. Results: The MEn levels influenced the responses to zootechnical performance. The broken-line model estimated the maximum responses for feed intake, egg production, egg weight, and egg mass as 3,040, 2,820, 1,802, and 2,960 kcal of MEn per kg of diet, respectively. Multivariate analysis revealed that the occurrence of hepatic steatosis and increased levels of Kupffer cells were not related to MEn levels. Conclusion: The level of 2,960 kcal/kg of MEn meets performance variable requirements without compromising hepatic physiology.

• Animal Bioscience
• /
• v.37 no.2
• /
• pp.218-227
• /
• 2024

Objective: The aim of this research was to explore the effects of dietary substitution of alfalfa hay by amaranth hay on production performance, rumen fermentation, nutrient digestibility, serum biochemical parameters and antioxidant ability in dairy cows. Methods: A total of 45 healthy Holstein cows with same parity and similar milk yield and body weight were randomly divided into 3 groups: control diet without amaranth hay (CON) or 50% and 100% alfalfa hay replaced by an equal amount of amaranth hay (dry matter basis, AH1 and AH2, respectively). All the cows were fed regularly 3 times a day at 06:30, 14:30, and 22:30 and had free access to water. The experiment lasted for 60 d. Results: The dry matter intake of CON and AH1 groups was higher (p<0.05) than that of AH2 group. Compared with AH1 group, the milk yield of AH2 group was reduced (p<0.05). Moreover, dietary substitution of alfalfa hay by amaranth hay increased (p<0.05) milk fat, ammonia nitrogen and acetate concentrations. However, the crude protein digestibility of AH2 group was lower (p<0.05) than that of CON group, while an opposite tendency of serum urea nitrogen was found between two groups. The neutral detergent fiber digestibility of AH1 group was increased (p<0.05) when compared to AH2 group. Amaranth hay treatment increased (p<0.05) the serum concentration of glutathione peroxidase in dairy cows. Compared with CON group, the malonaldehyde activity of AH1 group was decreased (p<0.05). Conclusion: Dietary replacing alfalfa hay with amaranth hay (50% ratio) in dairy cows did not affect production performance but improved their antioxidant ability.

• Korean Journal of Agricultural Science
• /
• v.50 no.2
• /
• pp.249-256
• /
• 2023

The purpose of this experiment was to determine the influence of providing laying hens with extra feed on egg production and egg quality parameters. A total of 480 laying hens (38-weeks old), were divided into five treatment groups (eight replicate cages/treatment and 12 layer/replicate) according to their starting body weight (1.98 ± 0.05 kg) in this four-week feeding trial. Five different feed allowances of the same diet (105, 110, 115, 120, and 125 g·day^-1·bird^-1) were assigned to layers. Daily inspections of remaining feed (around 0.1g) and layer mortality (0%) showed no harmful impact of supplying extra feed to layers. Providing 120 and 125 g of feed per day to layers resulted in the highest final body weight, large-egg ratio, and improved yolk color among all treatment groups. Layers receiving 125 g of feed daily had the highest egg weight, but the highest egg production ratio was observed in layers receiving 110 g of feed/day. The additional supply of feed did not have a negative impact on the productive performance or egg quality of the layers. The provision of 125 g feed per day led to an improvement of large-egg ratio, egg weight, and yolk color, but likely led to obesity of the layers, which manifested as an increase in body weight and a decline in the egg production ratio. We concluded that 110 grams of feed was the proper quantity after taking into consideration the significance of the health of the laying hen to the overall production performance.

• Journal of Korean Institute of Industrial Engineers
• /
• v.23 no.1
• /
• pp.197-213
• /
• 1997

It is not easy to find a good production schedule which can be used in practice. Therefore, production scheduling simulation with a simple dispatching rule or a set of dispatching rules is used. However, a simple dispatching rule may not create a robust schedule, for the same rule is blindly applied to all internal production processes. The presumption is that there might be a specific combination of appropriate rules that can improve the efficiency of a total production system for a certain type of orders. In order to acquire a better set of dispatching rules, simulation is used to examine the performance of various combinations of dispatching rule sets. There are innumerable combination of rule sets. Hence it takes too much computer simulation time to find a robust set of dispatching rule for a specific production system. Therefore, we propose a concept of the knowledge based simulation to circumvent the problem. The knowledge based simulation consists of knowledge bases, an inference engine and a simulator. The knowledge base is made of rule sets that is extracted from both simulation and human intuition obtained by the simulation studies. For a certain type of orders, the proposed system provides several sets of dispatching rules that are expected to generate better results. Then the scheduler tries to find the best by simulating all proposed set of rules with the simulator. The knowledge-based simulator armed with the acquired knowledge has produced improved solutions in terms of time and scheduling performance.

• Speech Sciences
• /
• v.12 no.4
• /
• pp.183-195
• /
• 2005

In the present study, we investigated development of verb inflections or endings in 3- to 5-year old Korean-speaking children using 28 action verbs for both comprehension and production tasks. For each verb, a l0-second long motion picture and a sheet of paper with three random-ordered color pictures representing 'before, in the middle of, at the end of' the action were generated. A past tense inflection' -et ta,' two present progressive verb endings '-enta' & '-ko itta.' a future tense ending '-elyeko hanta' were tested. In the comprehension task, children were asked to point to a picture correctly representing the tense of a presented verb. In the production task, children were asked to produce a verb with correctly marking the tense of a presented picture. The order of the two tasks were counterbalanced across the children, and the motion pictures were only presented in the first task. Across the ages, the performance accuracies on both comprehension and production tasks were the highest for the past tense marking followed by two present progressive and future tense markings. For each verb endings, the changes of accuracies across ages were analyzed in both tasks. The types of errors for production tasks were also reported.

• Journal of Ocean Engineering and Technology
• /
• v.24 no.4
• /
• pp.8-12
• /
• 2010

The use of a tidal-current power system is one source of renewable energy that can minimize the environmental impact of power production and offer many other advantages compared to conventional energy sources. Unlike other energy production approaches, rate of energy production can be precisely predicted and the operational rate is very high. The performance of the rotor, which has a vital role in energy production using tidal currents, is determined by various design factors, and it should be optimized for the specific ocean environment in the field. The horizontal-axis turbine is very sensitive to the direction of flow, and flow direction changes due to rise and fall of the tides. To investigate the performance of the rotor considering the interaction problems with incidence angle of flow, a series of experiments were conducted, and a 3D CFD model was designed and analyzed by ANSYS CFX. The results and findings are summarized in the paper.

• Journal of Korea Society of Industrial Information Systems
• /
• v.13 no.4
• /
• pp.132-138
• /
• 2008

Small and medium-sized manufacturing companies have introduced production information systems such as pop and MES to improve their productivity. However, there has been little research on this field This study provides answers for 3 following critical questions for successful implementation of production information systems based on the literature review and case studies. First, do investments on this system bring the positive performance? Second, what are the critical success factors that should be managed? Third, how long does it take to obtain its performance? This paper suggests some implications for the practitioners.

• Journal of Animal Science and Technology
• /
• v.62 no.2
• /
• pp.276-291
• /
• 2020

This study was conducted to investigate behavioral changes in laying hens (Hy-Line Brown) after transfer to a multi-tier system from the floor system and to examine their production performance. The hens were randomly divided into two groups and were allocated to the multi-tier system and the floor system at a commercial farm. Behavior of the laying hens was recorded by CCD (charge-coupled device) cameras and a digital video recorder. The data were scanned every 2 min to obtain an instantaneous behavioral sample or were immediately counted whenever the hens exhibited a designated behavior. Behavior changed dramatically during the first seven days. Egg production was higher in the multi-tier system, while cracked and dirty eggs were more frequent in the floor system (p < 0.05). No differences in mortality rate or egg quality were observed between the groups. In conclusion, the hens needed at least seven days to adapt to the multi-tier system. The multi-tier system was more efficient than the floor system in terms of production performance.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.34 no.3
• /
• pp.134-146
• /
• 2011

This paper suggests the product supply process model based on the store and production capacity, assortment planning and quick response for fast fashion retailers with BPMN. In the fast fashion industry, the standardized business process model is required to respond quickly market trends and customer requirements based on the quantitative and qualitative criteria. Thus we define the product supply processes which incorporate forecasting and assortment plan, cost and profitability of the production, store capacity based on the visual merchandising, and production capacity of the fast fashion retailers. Also we design the key performance indicators to evaluate the effectiveness of these product supply processes. The product supply process model for the fast fashion has great significance in embracing the fast fashion product development process because it presents the holistic view of the product supply process of the fast fashion and provides a performance evaluation mechanism. A case study shows that adopting the processes, a Korean fast fashion company achieves improvement in various performance indicators.