• Transactions of the Korean hydrogen and new energy society
• /
• v.22 no.5
• /
• pp.641-648
• /
• 2011

KEPRI (KEPCO Research Institute) designed and operated the lab-scale high temperature electrolysis (HTE) system for hydrogen production with $10{\times}10cm^2$ 5-cell stack at $750^{\circ}C$. The electrolysis cell consists of Ni-YSZ steam/hydrogen electrode, YSZ electrolyte and LSCF based perovskite as air side electrode. The active area of one cell is 92.16 $cm^2$. The hydrogen production system was operated for 2664 hours and the performance of electrolysis stack was measured by means of current variation with from 6 A to 28 A. The maximum hydrogen production rate and current efficiency was 47.33 NL/hr and 80.90% at 28 A, respectively. As the applied current increased, hydrogen production rate, current efficiency and the degradation rate of stack were increased respectively. From the result of stack performance, optimum operation current of this system was 24 A, considering current efficiencies and cell degradations.

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.3
• /
• pp.26-30
• /
• 1996

The successful development of the automobile industry in Korea is the firstfruit of the epochmaking automobile policy in 1973: Top-Down mass production of Korean model cars. In Top-Down system, indigenous model, which is the most important and difficult part of the automobile industry, is devised first, followed by the mass production of the major parts, such as bodies, engines, etc. This system is in contrast to the prevailing Bottom-up system in the third-world, which assembles automobiles by gradually adding up simple domestic parts. The Government, faced with a vicious circle of depen- dence on assembly of foreign cars, high prices, small demand and low production, decided it was time to move to the mass production of the indigenous models. It was hoped that the efficiencies of low cost Korean models would be epochally improved by overcoming the sway of foreign models and by strengthening the production capabilities of the main parts. In contrast to these develop- ment planning, assembled vehicles numbered only 26,300 units in 1973. In the year of 1995, the total number of automobile production have already passed 2,534,000. As steady growth in worldwide demand is forecast, Korea will able to play a major role as an important automobile maker of the next century.

• Animal Bioscience
• /
• v.37 no.2_spc
• /
• pp.360-369
• /
• 2024

Ruminal methane production functions as the main sink for metabolic hydrogen generated through rumen fermentation and is recognized as a considerable source of greenhouse gas emissions. Methane production is a complex trait affected by dry matter intake, feed composition, rumen microbiota and their fermentation, lactation stage, host genetics, and environmental factors. Various mitigation approaches have been proposed. Because individual ruminants exhibit different methane conversion efficiencies, the microbial characteristics of low-methane-emitting animals can be essential for successful rumen manipulation and environment-friendly methane mitigation. Several bacterial species, including Sharpea, uncharacterized Succinivibrionaceae, and certain Prevotella phylotypes have been listed as key players in low-methane-emitting sheep and cows. The functional characteristics of the unclassified bacteria remain unclear, as they are yet to be cultured. Here, we review ruminal methane production and mitigation strategies, focusing on rumen fermentation and the functional role of rumen microbiota, and describe the phylogenetic and physiological characteristics of a novel Prevotella species recently isolated from low methane-emitting and high propionate-producing cows. This review may help to provide a better understanding of the ruminal digestion process and rumen function to identify holistic and environmentally friendly methane mitigation approaches for sustainable ruminant production.

• Proceedings of the Korean Society of Embryo Transfer Conference
• /
• 2000.11a
• /
• pp.46-54
• /
• 2000

Transgenic rabbits were produced by DNA microinjection using growth hormone receptor (GHR) and IGF-1 receptor (IGF-1R) genes. Overall efficiencies for production of transgenic rabbits were 3.2% and 3.1% in GHR and IGF-1R genes, respectively. Founder rabbits transmitted transgenes to their progenies through medelian fashion. Growth rate in GHR and ICF-1R transgenic rabbits was faster than non-transgenic rabbits. Transgenic rabbits grew larger (25% and 15% increase in body weight of GHR and IGF-1R transgenic rabbits, respectively) than non-transgenic rabbits and organ weight of transgenic rabbits increased, suggesting that GHR and IGF-1 genes affects growth rates in transgenic rabbits.

• Journal of Environmental Science International
• /
• v.25 no.9
• /
• pp.1233-1239
• /
• 2016

This study aimed to evaluate changes in the TN and TP removal efficiencies, depending on whether or not a settling process is applied, in a sequencing batch reactor (SBR) process with a membrane bioreactor (MBR). Nutrient removal was considered in terms of developing an advanced water treatment system for ships in accordance with water quality standards set forth by 227(64). For these purposes, the TN and TP concentrations in the inflow and outflow water were measured to calculate the TN and TP removal efficiencies, depending on whether or not a settling process was used. Water discharged from a bathroom, which was constructed for the experiment, was used as the raw water. The experiment that included a settling process was conducted twice, and the operating conditions were: aeration for 90 min, settling for 30 min, agitation for 15 min, and settling for 15 min for one experiment; and aeration for 150 min, settling for 45 min, agitation for 15 min, and settling for 15 min in the other. Operating conditions for the experiment that did not include a settling process were: aeration for 180 min and agitation for 60 min. The concentration of the mixed liquor suspended solids (MLSS) in the reactor was 3,500 mg/L, while the aeration rate was 121 L/min and the water production rate was 1.5 L/min. For the two experiments where a settling process was applied, the average TN removal efficiencies were 44.39% and 41.05%, and the average TP removal efficiencies were 47.85% and 46.04%. For the experiment in which a settling process was not applied, the average TN removal efficiency was 65.51%, and the average TP removal efficiency was 52.51%. Although the final nutrient levels did not satisfy the water quality standards of MEPC 227(64), the TN and TP removal efficiencies were higher when a settling process was not applied.

• Transactions of the Korean hydrogen and new energy society
• /
• v.28 no.2
• /
• pp.156-165
• /
• 2017

This study quantitatively assessed the environmental impacts of fuel cell (FC) systems by performing life cycle assessment (LCA) and analyzed their energy efficiencies based on energy return on investment (EROI) and electrical energy stored on investment (ESOI). Molten carbonate fuel cell (MCFC) system and polymer electrolyte membrane fuel cell (PEMFC) system were selected as the fuel cell systems. Five different paths to produce hydrogen ($H_2$) as fuel such as natural gas steam reforming (NGSR), centralized naptha SR (NSR(C)), NSR station (NSR(S)), liquified petroleum gas SR (LPGSR), water electrolysis (WE) were each applied to the FCs. The environmental impacts and the energy efficiencies of the FCs were compared with rechargeable batteries such as $LiFePO_4$ (LFP) and Nickel-metal hydride (Ni-MH). The LCA results show that MCFC_NSR(C) and PEMFC_NSR(C) have the lowest global warming potential (GWP) with 6.23E-02 kg $CO_2$ eq./MJ electricity and 6.84E-02 kg $CO_2$ eq./MJ electricity, respectively. For the impact category of abiotic resource depletion potential (ADP), MCFC_NGSR(S) and PEMFC_NGSR(S) show the lowest impacts of 7.42E-01 g Sb eq./MJ electricity and 7.19E-01 g Sb eq./MJ electricity, respectively. And, the energy efficiencies of the FCs are higher than those of the rechargeable batteries except for the case of hydrogen produced by WE.

• Asian-Australasian Journal of Animal Sciences
• /
• v.13 no.6
• /
• pp.856-860
• /
• 2000

Cloning technology continues to capture widespread attention by the international news media and biomedical and agricultural industries. The future uses of this technology could potentially contribute to major advances in biomedical and agricultural sciences. Cloned transgenic dairy cattle possessing milk promoters directing transgenes will produce pharmaceutical proteins in their milk faster, more efficiently and less expensively than transgenic cattle created using microinjection techniques. Additionally, cloned transgenic fetuses and animals may become a source of cells, tissue and organs for xenotransplantation. Lastly, but maybe most importantly, enhanced production traits and disease resistance may be realized in animal agriculture by utilizing these new technologies. The recent advances in the cattle cloning technology are important but there are still major obstacles preventing widespread commercial use of this technology. The type of donor nucleus, recipient cytoplasm, and cloning procedures used will impact the potential number of clones produced and the uses of the technology. In addition, the new advances in cloning methodology have not improved the relatively low pregnancy rates or reduced the incidence of health problems observed in cloned offspring. These problems may require novel techniques to decipher their cause and new methods of preventing and/or diagnosing them in the preimplantation embryo. The commercial potential is enormous for cloning technology; however, little has been done to improve the efficiencies of the procedure. Improving procedural efficiencies is a critical developmental milestone especially for potential uses of cloning technology in animal agriculture.

• Journal of Korean Society of Environmental Engineers
• /
• v.29 no.1
• /
• pp.98-105
• /
• 2007

The objectives of this study were to demonstrate that enhanced anaerobic digestion could be achieved by adopting ultrasonic cavitation pretreatment on the basis of the biogas production and to compare the simulation results of ADM1 (Anaerobic Digestion Model No. 1) with results of the experimentally operated digester the ultrasonic pretreatment of sewage sludge showed the hindered effect on the dewaterbility and the increase of SCOD production. In this study, four sets of lab-scale anaerobic digester were operated with untreated(control), 30 min, 60 min and 90 min ultrasonic pretreated sludge. TCOD removal efficiencies in digesters of control, 30, 60, 90 min sonicated sludge were 31.9%, 37.9, 38.5% and42.2%, and 75 removal were 15.9%, 20.8%, 21.5%, 24.1% respectively. Also more biogas was produced gradually with the increased sludge loading and the pretreatment time. Overall the simulation results had a correspondence tendency with the experimental efficiencies.

• Environmental and Resource Economics Review
• /
• v.21 no.2
• /
• pp.211-235
• /
• 2012

This paper presents an alternative decomposition technique to identify the relative importance of factors associated with changes in $CO_2$ emissions by using directional distance function to model the joint production of desirable and undesirable outputs. The key feature of the proposed approach is the introduction of fossil and non-fossil fuel energy input efficiencies, productivity change and emission intensity change. For the 27 OECD countries as a whole, the empirical results indicate that economic growth is the most important contributor to $CO_2$ emissions increase, while efficiency change is the most important component to $CO_2$ emissions reduction between 1980 and 2007. For more extensive insights, this paper divided 3 groups according to the emission growth rate and find out that high emission countries show relatively low production efficiencies and technical changes contributing $CO_2$ emissions increase. The results also provide that more strict environmental regulations are needed to improve the pollution intensity in these countries.

• Environmental Engineering Research
• /
• v.11 no.3
• /
• pp.134-142
• /
• 2006

The treatment of high-strength swine wastewater by anaerobic digestion combined with an aquatic plant system was investigated. Anaerobic digestion of swine wastewater gave volatile solids (VS) removal efficiencies of 43.3%, 52.1% and 54.5% for hydraulic retention times (HRTs) of 20, 30, 40 days, respectively. The removal efficiencies of VS, total chemical oxygen demand (TCOD) and soluble chemical oxygen demand (SCOD) decreased with increasing VS volumetric loading rate (VLR). Higher organic removal efficiency was observed at longer HRTs for the same VS volumetric loading rate. As VS volumetric loading rate increased, biogas production increased and the methane content of the biogas decreased. Experiments using duckweed (Lemna species) as an aquatic macrophyte gave the following results. In the case of nitrogen, removal efficiency was above 60% and effluent concentration was below 10.0 mg/L when the influent ammonia-N loading was about $1.0\;g/m^2/day$. In the case of phosphorus, removal efficiency was above 55% and effluent concentration was below 2.0 mg/L when the influent $PO_4$-P loading was about $0.15\;g/m^2/day$. In addition, crude protein and phosphorus content of duckweed biomass increased from 15.6% to 41.6% and from 0.8% to 1.6%, respectively, as the influent nutrient concentration increased. The treatment of high-strength swine wastewater by anaerobic digestion combined with an aquatic plant system offers good performance in terms of organics and nutrient removal for relatively low operation and maintenance costs. The results indicate that under appropriate operational conditions, the effluent quality is within the limits set by Korean discharge criteria.