• Asian-Australasian Journal of Animal Sciences
• /
• 제25권4호
• /
• pp.479-485
• /
• 2012

In order to develop methods that would enlarge the feed resources in Tibet, mixtures of hulless-barley straw and tall fescue were ensiled with four levels (0, 10%, 20%, and 30% of fresh weight) of wet hulless-barley distillers' grains (WHDG). The silos were opened after 7, 14 or 30 d of ensiling, and the fermentation characteristics and nutritive quality of the silages were analyzed. WHDG addition significantly improved fermentation quality, as indicated by the faster decline of pH, rapid accumulation of lactic acid (LA) (p<0.05), and lower butyric acid content and ammonia-N/total N (p<0.05) as compared with the control. These results indicated that WHDG additions not only effectively inhibited the activity of aerobic bacteria, but also resulted in faster and greatly enhanced LA production and pH value decline, which restricted activity of undesirable bacteria, resulting in more residual water soluble carbohydrates (WSC) in the silages. The protein content of WHDG-containing silages were significantly higher (p<0.05) higher than that of the control. In conclusion, the addition of WHDG increased the fermentation and nutritive quality of straw-grass silage, and this effect was more marked when the inclusion rate of WHDG was greater than 20%.

• Asian-Australasian Journal of Animal Sciences
• /
• 제10권6호
• /
• pp.599-602
• /
• 1997

Fluctuation of fungal zoospores on agar strips were observed in the rumen of sheep fed three different levels of dietary concentrate, timothy hay: concentrate = 3:0 (AF diet), timothy hay: concentrate = 2:1 (MC diet), timothy hay : concentrate = 1:2 (HC diet) respectively. The number of zoospores on the strip was drastically decreased after morning feed with AF diet. The number was the highest at 0 h ($1.34{\times}10^2/cm^2$), then declined to $2.0{\times}10^3/cm^2$ at 9 h after feeding. In the rumen of animals fed MC diet, the number of zoospores decreased with time after feeding, although the decrement was slower than that with AF diet. During 0-3 h after feeding, number of zoospores was $1.6{\times}10^4/cm^2$. Although the number slightly decreased at 6 and 9 h, relatively high levels were maintained. It seems that the inducers for zoospore-release were maintained at relatively high concentration throughout incubation period. The fluctuation pattern of number of germinated zoospores was different in the rumen of animals fed HC diet from those of AF and MC diets. The number of zoospores was constantly maintained at lower level ($1.0{\times}10^3/cm^2$) than the other diets. For MC diet, continuous high number of germinated zoospores may be due to the continuous release of zoospores by hemes in timothy hay and concentrate feed, and by unknown mechanisms. Unlike AF diet which promoted relatively rapid decline of zoosporogenesis, supplementation of concentrate feed to the timothy hay did not promote such rapid decline of zoosporogenesis. It was suggested that release of inducers for zoosporogenesis from concentrate feed persisted longer time than from timothy hay. HC diet promoted the lowest zoospore production, suggested the lowest fungal population size in this experiment. These results show that an appropriate amount of concentrate may support fungal growth and stimulate zoosporogenesis in the rumen.

• Journal of Korea Trade
• /
• 제25권1호
• /
• pp.1-17
• /
• 2021

Purpose - The global trend of protectionism has expanded since the onset of US President Donald Trump's administration in 2017. This global phenomenon has led to a significant reduction in world trade volume and a negative impact on economic development in some countries where the external sector accounts for a large proportion of GDP. Although Korea is a country vulnerable to this deteriorating trade environment, few studies have examined the relationship between protectionism and its business cycles based on Korean data. Thus, this paper investigates the impact of protectionism on Korea's business cycle. Design/methodology - To identify future implications, we conduct a structural vector autoregression (VAR) analysis using monthly Korean data from 1994 to 2015. Macroeconomic variables in the model include the industrial production index, inflation rates, exports (or net exports), interest rates, and exchange rates. For the identification of the shock reflecting the expansion of protectionism, we use an antidumping investigation (ADI) data. Since ADIs are followed generally by the imposition of antidumping tariffs, they have no contemporaneous impact on tariffs and are also contemporaneously exogenous to other endogenous variables in the VAR model. We examine two kinds of ADI shocks i) shocks on Korean exports imposed by Korea's trading partners (ADI-imposed shocks) and ii) shocks on imports imposed by the Korean government (ADI-imposing shocks). Findings - We find that Korea's exports decline sharply due to ADI-imposed shocks; the lowest point at the third month after the initial shock; and do not recover until 24 months later. Simultaneously, the inflation rate decreases. Therefore, the ADI-imposed shock can be regarded as a negative shock on the demand curve where both production and price decrease. In contrast, the ADI-imposing shock generates a different response. The net exports decline, but the inflation rate increases. These can be seen as standard responses with respect to the negative shock on the supply curve. Originality/value - We shed light on the relationship between protectionism and Korea's economic fluctuations, which is rarely addressed in previous studies. We also consider the effects of both protective policy measures on imports to Korea imposed by the Korean government and on policy measures imposed by Korea's trading partner countries on its exports.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2018년도 춘계 학술논문 발표대회
• /
• pp.310-311
• /
• 2018

This study compared the labor productivity of the construction industry to the manufacturing and service industries. In addition, It analyzed the construction labor productivity gap of the G7 countries based on data from the Korean Productivity Center. A comparative analysis of construction labor productivity between manufacturing and service industries, based on statistics from the National Statistical Office, revealed a relatively low level and trend of continued decline. In addition, a comparative analysis of the productivity of construction workers in the major G7 countries found that the difference in productivity is very large, with an average of 65.3 %. Therefore, domestic construction companies and the government should prepare Improvement measures to improve productivity by investing in technology development to increase labor productivity and improving the production system of the construction industry.

• 한국IT서비스학회:학술대회논문집
• /
• 한국IT서비스학회 2006년도 춘계학술대회
• /
• pp.393-400
• /
• 2006

An autonomic system management technology is being developed for self-managing during deployment and on an on-going basis for a production environment so that the system may be deployed and managed in production with minimal human intervention. As networks and distributed systems grow and change, system deployment failures, hardware and software issues, and human error can increasingly hamper the performance and capacity of the components in an IT system, driving up overall costs-even as technology component costs continue to decline. Known as the only solution for an on demand IT environment, the architecture of the autonomic system management will be shown and also the corresponding standards on the way will be introduced in this paper.

• 대한안전경영과학회지
• /
• 제19권4호
• /
• pp.77-85
• /
• 2017

As industrialization progresses, mass production becomes a smart production system. However, industrial accidents do not decline, and during the course of industrialization, due to the logic of economic agents that have an economical and effective employment environment, they are changed to non-regular workers. The Occupational Safety and Health Act stipulates that the safety managers must be distinguished and the safety managers perform the task of conducting industrial accidents by balancing the duties and regulations specified in the Act on Special Measures for Deregulation. Safety administrators providing advice on issues needed to prevent industrial accidents and preventive measures We would like to present the problems and improvements that may arise due to safety managers' replacement due to accidents caused by industrial accidents or accidents.

• 한국가스학회지
• /
• 제20권3호
• /
• pp.1-11
• /
• 2016

수압파쇄된 석탄층 메탄가스(coalbed methaen, CBM) 수평정의 생산거동을 예측하고 궁극가채매장량(estimated ultimate recovery, EUR)을 산출하기 위해 감퇴곡선분석, 유동영역분석, 유동물질평형분석을 활용하여 CBM 생산자료를 분석하였다. 가상의 생산자료를 발생시키기 위해 미국의 아팔라치안 분지(Appalachian basin)의 CBM 물성자료를 기반으로 저류층 모델을 구축하였다. 생산자료 분석 결과, 약 6~16년간 천이유동이 발생하였으며, 그 후에 경계지배 유동이 발생하였다. 천이유동 구간의 자료를 활용하여 생산자료 분석을 시행할 경우 예측된 생산자료와 가상의 생산자료 간의 큰 오차가 발생하였으며, 생산거동 예측이 불가함을 확인하였다. 경계지배유동의 생산자료 분석 결과, 1년 이상의 자료를 가지고 있을 때 EUR 오차율 5%이내에서 생산거동 예측이 가능한 것으로 확인되었다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제14권11호
• /
• pp.1516-1519
• /
• 2001

The data consisted of 369 lactation records for calvings over a sixteen-year period (1972-1987) and included only cows that had normal milk records. The data were analysed using a linear model containing the fixed effects of parity, year of calving and season of calving. The least squares means${\pm}$S.E. were $1,273{\pm}58.4kg$ for milk yield, and for post-partum body weight (kg) at 2, 3 and 4 months after calving were $343.40{\pm}3.96$, $346.10{\pm}4.10$ and $352.54{\pm}4.26$, respectively. With the exception of season of calving, the effects of parity and year of calving were significant (p<0.01) on the performance of the animals. Thus, the mean-milk yields 1162, 1351 and 1350, were similar for pre-, peak- and post rainy seasons, respectively. On the other hand, as parity increased from 1 to 3, milk yield also increased, but thereafter, there was a gradual decline in milk yield. Similarly, post-partum body weight also increased with parity. However, no consistent pattern for year effect was observed which probably was a reflection of the variation in climatic conditions, or forage quality and/or availability. The phenotypic correlations between milk yield and post-partum body weights were negative and small (ranging from -0.01 to -0.08). However, high milk production in cows was associated with longer calving interval. The implications from the phenotypic correlations are suggestive of one or two possibilities. Firstly, selection for increased body weight may actually result in decreased milk yield. Also, a substantial genetic antagonism may exist between milk yield and fertility in the crossbred cows. Therefore, it is important that selection to improve milk production should take into consideration the reproductive performance of the cows.

• 한국작물학회지
• /
• 제61권2호
• /
• pp.104-112
• /
• 2016

A double-cropping system with soybean (Glycine max) following the cultivation of potato, garlic, and onion is widely adopted in the southern region of Korea. For this system, marginal dates for planting must be determined for profitable soybean yields, because the decision to plant soybean as a second crop is occasionally delayed by harvest of the first crop and weather conditions. In order to investigate the effect of planting date on soybean yield, three cultivars (early and late maturity) were planted on seven different dates from May 1 to July 30 in both paddy and upland fields across 2012 and 2013. Soybean yields were significantly different among the planting dates and the cultivars; however, the interaction between cultivar and planting date was not significant. Based on linear regression, the maximum yield of soybean was reached with a June 10 planting date, with a sharp decline in yield for crops planted after this date. The results of this study were consistent with those of a previous one that recommends early and mid-June as the optimum planting period. Regardless of soybean ecotype, a reduction in yield of greater than 20% occurred when soybean was planted after mid-July. Frost during soybean growth can reduce yields, and the late maturity cultivars planted on July 30 were damaged by frost before completing maturation and harvest; however, early maturity cultivars were safely harvested. For sufficient time to develop and reach profitable yields, the planting of soybean before mid-July is recommended.

• 아태비즈니스연구
• /
• 제12권1호
• /
• pp.209-223
• /
• 2021

Purpose - The purpose of this study was to investigate the relationship between Korea agricultural productions and Greenhouse Gas (GHG) emissions based on Environmental Kuznets Curve (EKC) hypothesis. Design/methodology/approach - This study utilized time series data of economic growth, greenhouse gas, agricultural productions, trade dependency, and energy usages. In order to econometric procedure of EKC hypothesis, this study utilized unit root test and cointegration test to check staionarity of each variable and also adopted Vector Error Correction Model (VECM) and Ordinary Least Square (OLS) to analyze the short and long run relationships. Findings - In the short run, greenhouse gas emissions resulting from economic growth show an inverse U-shape relationship, and an increase in agricultural production and energy consumption led to increase in greenhouse gas emission. In the long run, total GHG emissions and CO2 emissions show an N-shaped relationship with economic growth, and an increase in agricultural production has resulted in a decrease in total GHG and CO2 emissions. However, methane (CH4) and nitrous oxide (N2O) emissions showed an inverse U-shape relationship with economic growth, which indicated the environment and production process of agricultural production. Research implications or Originality - Korea agricultural production has different effects on the GHG emission sources, and in particular, methane (CH4) and nitrous oxide (N2O) emissions show to increase as the agricultural production expansions, so policy or technological development in related sector is required. Especially, in the context of the 2030 GHG reduction road-map, if GHG-related reduction technologies or policies are spread, national GHG emission reduction targets can be achieved and this is possible to predict the decline in production in the sector and damage to the related industries.