• Applied Chemistry for Engineering
• /
• v.29 no.3
• /
• pp.289-297
• /
• 2018

The vehicle lubricant has captured 35% of the total lubricant market while the engine oil possessed 77% of the vehicle lubricant market in Korea. The suitable quality management of circulating engine oil is thus required for the driver and engine protection. But, KS and synthetic engine oil products (containing over 30% synthetic oil) are exempt to any quality inspections under Petroleum and Alternative Fuel Business Act. In this study, our research group investigated the quality monitoring of 30 kinds of domestic distributing synthetic engine oils. Two kinds of the engine oil showed an off specification from the test results; one engine oil is an imported and the other is a KS synthetic one. Also, the pattern of engine oils were analyzed using SIMDIST (simulated distillation) and the most engine oils had a broad carbon number spectrum, which is a typical of mineral oils except several imported products. Thus, we concluded that relevant laws for the proper quality management of synthetic oils and KS products are needed to be established for preventing consumer's damages.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2012.06a
• /
• pp.87-88
• /
• 2012

The IHO developed the S-100 standard for Digital Hydrographic Data in order to assist the proper and efficient use of hydrographic data and information for the safety of navigation and the protection of marine environment. The former model, S-57, was considered outdated to be utilized as the basis for the next-generation Electronic Chart(ENC) product specification. The key feature of the S-100 standard is the use of Registry and its components, Registers. This online-based Registry provides a universal standard that can be implemented in the actual performance of the navigation system with convenience. In the current situation, the only registry is owned by the IHO and it is available to domain experts. However, since S-100 is an international standard operated by an international organization, the process of the changes and updates of the data requires time before immediate implementation when demanded. Therefore, regarding the safety of navigation of the domestic users and mariners, a separate domestic registry is necessary to develop a domestic Information Registry. This study specifically aims to build a Registry based on IHO published S-99 through designing an adequate website dedicated for its purpose to provide collection of definitions and hydrographic data.

• Journal of Conservation Science
• /
• v.32 no.3
• /
• pp.403-416
• /
• 2016

Mineral composition and content of 22 Korean Dancheong pigment products were obtained by Rietveld quantitative analysis. Jubosa, Hwang, Seokrok, Seokcheong and Hobun consist of pure cinnabar, orpiment, malachite, azurite and calcite (or aragonite), respectively. Whereas Seokganju, Hwangto, Noerok, Lapis lazuli, Baekto and Cockie hobun mainly consist of hematite, goethite, celadonite, lazurite, kaolin mineral and portlandite, respectively. And they all consist of soil minerals (quartz, feldspar, sericite and vermiculite) and filler minerals in the industry field (calcite, gypsum and anhydrite) at a different content. Quantitative XRD proved more useful method to determined exact mineral composition and content than chemical or microscopical data. If this method utilize for specification of natural pigment product, it is considered to be applicable in restoration technology and conservation science field.

• The Journal of the Acoustical Society of Korea
• /
• v.15 no.6
• /
• pp.81-89
• /
• 1996

It is very important for ultrasonic test method to evaluate the integrity of the class I components in nuclear power plants. However, as the rltrasonic test is affected by internal structures and configurations of test materials, backscattering, that is, time invariant noise is generated in large grain size materials. Due to the above reason, the received signal results in low signal to noise(S/N) ratio. Split spectrum processing(SSP) technique is effective to suppress the grain noise. The conventional SSP technique. however, has been applied to unique algorithm. This paper shows that MPO(minimization and polarity threshold) algorithm which two algorithms are applied simulatancously, was utilized, the signal processing time was shorten by using the new constant-Q SSP with the FIR filter which frequency to bandwidth ratio is constant and the optimum parameters were analysed for the signal processing to longitudinal wave and shear wave with the same requirements of inspection on nuclear power plant site. Moreover, the new ultrasonic test instrument, the reference block of the same product form and material specification, stainless stell test specimens and copper test specimens block of the same fabricated for the application of new SSP technique. As the result of experimental test with new ultrasonic test instrument and test specimens, the signal to noise ratio was improved by appying the new SSP technique.

• Journal of the Korean Applied Science and Technology
• /
• v.30 no.4
• /
• pp.701-714
• /
• 2013

Recently, due to the activation policy of biodiesel, the blending biodiesel to petroleum product is increasing. Low-temperature fluidity and oxidation stability are the most significant issues to the marketers and end users of biodiesel. Thus, the way to control the quality of biodiesel blended fuels was investigated by duplicating the real storage situation of biodiesel blended fuels and evaluating the effect of oxidation trend and quality degradation. From the results of oxidation degradation test of biodiesel blended fuels, no special quality degradation has been observed through the evaporation for 18 weeks in a summer season under a storage circumstance without exposure to the sun light. However, the severe quality degradation was observed in PE vessel in only 2 weeks of storage. This oxidation degradation was also verified with FT-IR spectrum change. However, the special symptom cannot be distinguished by the quality test because the quality specifications were satisfied despite of the drastic oxidation degradation. Namely, the problem in a vehicle could be occurred by oxidation materials(polymer, organic acid. etc.) under oxidation even though it satisfied the quality specification.

• The Journal of the Korea Contents Association
• /
• v.14 no.3
• /
• pp.151-165
• /
• 2014

Korean traditional alcohol's growth gets declined after Makgeolli's boom and it's time to enter the takeoff stage using cup based on the characteristics of each alcohols in order to their globalization and quality improvement. For now, there are 3 features of Korean traditional alcohol's cup design development; subdivision, quality improvement, systematization. However, there's no product design case that reflect the characteristics of the alcohol from the planning phase. Therefore, it needs to establish process technology for storytelling and emotion based cup design. This research aims to extract the specification for cup design and to find out the visualization element of cup's shape and material by studying 5 senses and traditional alcohol's objective informations. Through the study, the elements that can maximize the specific traditional alcohol's marketability: cup's label, pattern, decorative element based on the storytelling like history and tale were found. As a result, those result can give a new export strategy by developing competitive design that has emotional element and storytelling from the traditional alcohol's characteristics in a situation of stagnant export of the small sized home-brewed liquor business.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.4A
• /
• pp.440-449
• /
• 2008

In this paper, we propose a 16-QAM carrier recovery loop which is suitable for the implementation of Inmarsat M4 system receiver. Because the frequency offset of ${\pm}924\;Hz$ on signal bandwidth 33.6 kHz is recommended in Inmarsat M4 system specification, carrier recovery loop having stable operation in the channel environment with large relative frequency offset is required. the carrier recovery loop which adopts only PLL can't be stable in relatively large frequency offset environment. Therefore, we propose a carrier recovery loop which has stable operation in large relative frequency offset environment for Inmarsat M4 system. The proposed carrier recovery loop employed differential filter-based noncoherent UW detector which is robust to frequency offset, CP-AFC for initial frequency offset acquisition using UW signal, and 16-QAM DD-PLL for phase tracking using data signal to overcome large relative frequency offset and achieve stable carrier recovery performance. Simulation results show that the proposed carrier recovery loop has stable operation and satisfactory performance in large relative frequency offset environment for Inmarsat M4 system.

• Management & Information Systems Review
• /
• v.23
• /
• pp.25-40
• /
• 2007

In the highly competitive and divers world of financial market, customer is the single most important factor to company's survival. Especially, creating a relationship with valued customers is a key to success. CRM provides the mean to retain high value customers. It takes a prospect of what customers expect. Utilizing those knowledge can help the products and service meet the customers' needs, thereby maximizing customer satisfaction and company's profit. In this report, I am going to suggest a few ways to develop successful CRM in the life insurance industry. First, CRM should innovate the way of communication to keep pace with Web 2.0 era. In other words, the customer's needs should be caught by real-time communication than traditional off-line market research. Thus, the functionality and specification of products can be decided by customer's direct choice so that the customers are able to purchase the understanding and experience of the products. Second, CRM project should consider whether the initial strategy plan can promise the stable growth of customer at the first step. When planning strategy, the project needs to identify what customer wants and how to fulfill the needs with stable growth of the customer. In addition, the CRM should be developed by realizing that customer centric benefits ultimately guarantee the growth of the organization. Third, CRM systems should enhance the organization's ability to take the customer's insight in a 360 degree view and to capture the voice of the customer directly. In order to develop the best matched product package, more precise customer segmentation should be ahead of market segmentation strategy. Forth, the biggest reward from CRM will be a customer royalty program. Many successful banks are already planning and practicing customer royalty strategy. A comprehensive analysis of customers and their behavior allow organization to identify high value potential customers' needs and determine a strategy required to meet those needs. Even life insurance companies such as Prudential Korea are developing products designed for royal customers. Fifth, understanding and managing the experience of customer called Customer Experience Management also can increase customer satisfaction. Measuring only customers' experience and adapting it to marketing strategy make products position in the gap between the customers' expectation and experience not required by market. A key component of CEM is its application across all organizational functions. At last, the direction of change and development of CRM can be defined from the conceptualization of information technology represented by Ubiquitous and Web 2.0. Instead of just managing customer information, companies should take the initiative in personalized system with customer oriented strategy. Furthermore, with the regular communication between CRM stakeholders (Sales-Marketing-IT), customer's demand should be directly reflected to enterprise strategy in real time.

• Journal of Science and Technology Studies
• /
• v.18 no.1
• /
• pp.177-217
• /
• 2018

This study examines the case of living lab applied in the R&D initiatives for solving societal problems and challenges. It discusses how to use the living lab in national R&D projects. The analyzed cases are 'Develop portable fundus camera for eye disease screening test to resolve health inequalities' and 'Auto-sensing integrated system development in rural pedestrian crosswalk'. As a result of the analysis, both cases were designed as a user participatory R&D structure by utilizing living lab. In other words, living lab has operated as a system that evolves technology-products-services into an infrastructure. It can realize final demand specification, product, service improvement and demonstration through continuous interaction of end users. As a result of the case analysis, the following policy tasks can be derived. First, living lab is a new concept and it is in the early stage of implementation in Korea. Therefore, it is necessary to monitor and evaluate living lab experiments and build suitable models for Korean society by sharing cases and achievements. Second, the strategic niche management are necessary for the introduction of living lab. Third, living lab can be used as a tool to transform the existing technology acquisition centered innovation policy to the policy for customer needs and problem solving. Fourth, there is a need for flexibility and adaptability in strategy and system to correct errors that appear in the living lab processes.

• Journal of the Korea Institute of Building Construction
• /
• v.18 no.5
• /
• pp.429-437
• /
• 2018

The aim of the research is to analyze a feasibility of rapid evaluation method for cement fineness by the relation analysis between density measurement using hydrometer and fineness of ordinary Portland cement. Additionally, based on the commercially available cement product, relation between a series of fundamental properties of cement mortar and fineness of cement powder was analyzed. As an experimental result, the actually measured fineness value of cement powder showed a good correlation with the fineness value obtained by hydrometer while there was poor correlation with the fineness value on specification. Especially, the density measurement in three minutes showed the closest relation with cement powder fineness, thus rapid quality evaluation of cement powder can be possible by using the regression equation obtained from the three minutes density measurement. Additionally, there was a high relation between cement powder fineness with a fundamental properties of the cement mortar such as fluidity, air content, setting time, and strength development.