• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.8
• /
• pp.829-836
• /
• 2005

In this study, the characteristics of atrazine decompositon with photo-chemical oxidation process was investigated by the oxidation products analysis. The main products of the process were OIET(2-hydroxy-4-ethylamino-6-isopropylamino s-triazine), OIAT(2-hydroxy-4-amino-6-isopropylamino s-triazine) and OAAT(2-hydroxy-4,6-diamino-s-triazine), resulting i n dechlorination or hydroxylation as the main mechanism of the photo-chemical oxidation process. Through the material balance analysis of TOC and chloride ion in the aqueous solution, it was concluded that mineralization of the atrazine was not occurred but the dechlorination of atrazine had been completed.

• Proceedings of the Korea Society of Design Studies Conference
• /
• 1999.10a
• /
• pp.20-21
• /
• 1999

오늘날 제품개발 환경에서 디자이너는 고유의 디자인 업무뿐 아니라 여러 기능부서의 의견을 수렴하고 통합, 조정하는 교량 또는 촉매로서의 역할을 요구받고 있다. 이러한 변화에 따라 디자이너는 제품기획에서 생산, 판매에 이르는 제품개발의 전 단계에 적극적으로 그 역할을 하지 않을 수 없게 되었다. (중략)

• Journal of the Korean Chemical Society
• /
• v.42 no.2
• /
• pp.203-208
• /
• 1998

The photochemical reactivities of 2-halobenzyl phenyl ether, in which 2-halobenzyl moiety are tethered to phenyl moiety by the etheral alkyl linkage, has been studied. In the presence of nitrogen, the photochemical reaction of 2-chlorobenzyl phenyl ether (1) produces mainly phenol and photo-Fries type reaction products, while the corresponding bromo analog 2 produces photocyclization and photoreduced products, along with phenol and photo-Fries type products. The former result implies that since chlorine is bound to the benzyl ring firmly, the rather weaker $CH_{2}-O$ bond of 1 is cleavaged to produce the photo-Fries type product. The latter implies that the photoinduced fission of phenyl-bromine bond of 2 can compete with the fission of $CH_{2}-O$ bond, since the bond energy of phenyl-bromine is lower than that of phenyl-chlorine. Since by the presence of oxygen the formation of phenol is not affected much, the formation of photo-Fries type products is changed a little, and the formations of photocyclization and photoreduced products are affected effectively, a singlet state is involved in the formation of phenol, and both singlet and triplet state may be involved in the formation of photo-Fries type reaction, while a triplet state is involved in the formation of photocyclization and photoreduction products.

• Journal of the Korea Safety Management & Science
• /
• v.6 no.4
• /
• pp.155-170
• /
• 2004

Among the semiconductor If-chips, unlike memory chips, a majority of Application Specific IC(ASIC) products are produced by customer orders, and meeting the customer specified due date is a critical issue for the case. However, to the one who understands the nature of semiconductor manufacturing, it does not take much effort to realize the difficulty of meeting the given specific production due dates. Due to its multi-layered feature of products, to be completed, a semiconductor product(called device) enters into the fabrication manufacturing process(FAB) repeatedly as many times as the number of the product specified layers, and fabrication processes of individual layers are composed with similar but not identical unit processes. The unit process called photo-lithography is the only process where every layer must pass through. This re-entrant feature of FAB makes predicting and planning of due date of an ordered batch of devices difficult. Parallel machines problem in the photo process, which is bottleneck process, is solved with restricted roll out algorithm. Roll out algorithm is a method of solving the problem by embedding it within a dynamic programming framework. Restricted roll out algorithm Is roll out algorithm that restricted alternative states to decrease the solving time and improve the result. Results of simulation test in condition as same as real FAB facilities show the effectiveness of the developed algorithm.

• Fibers and Polymers
• /
• v.5 no.4
• /
• pp.253-258
• /
• 2004

Living nature of photoinduced cationic polymerization of isobutyl vinyl ether (IBVE) in the presence of various combinations of diphenyliodonium halide (DPIX), a photocationic initiator and zinc halide $(ZnX_2)$ in methylene chloride has been investigated. Attainment of $100\%$ conversion and a linear relationship between $\%$conversion and number average molar mass of the resulting polymer, strongly suggests the living nature of this system. Livingness of the polymerization system was observed irrespective to the type of halide anion of the initiator and zinc salts unless the reaction temperature is not higher than $-30^{\circ}C$. The rate of polymerization decreases in the order of iodide > bromide > chloride when halide salt of DPIX and $ZnX_2$ are used. It is postulated that the cationic initiation is started by the insertion of weakly basic monomer in to the activated C-X terminal of the monomer adduct which is a reaction product of monomer and HX, a photolytic product of DPIX, formed in situ during the photo-irradiation process. It was concluded that polymerization is initiated by the insertion of weakly basic monomer into activated C- X terminal of monomer adduct due to the pulling action of$ZnX_2$, which successively producing a new polarized C-X terminal for the propagation in cationic nature. This led us to a conclusion that the living nature of this cationic polymerization is ascribable to the polarized C-X growing terminal, which is stable enough to depress the processes of chain transfer or termination process.

• Journal of Adhesion and Interface
• /
• v.11 no.2
• /
• pp.57-62
• /
• 2010

Photo-curable material can be crosslinked among molecules by light source such as UV and visible light materials. Material properties are controlled by crosslink reaction. Shrinkage is occured during the curing reaction of material structure. Phenomenon of shrinkage stress occurs inside the product and reduce the stability of the product causes problems. Heat shrink the evaluation of the phenomenon has been formalized. But the evaluation of photo shrink is not enough. In this experiment, real-time contract with shrinkage tester phenomena and analysis degree of shrinkage of the material differences. According to the research, experimental results and theoretical analysis of the results were big differences. Shrinkage, especially for a number of different functional groups that were very different theory. These differences are occurred by the molecular structure different and not enough reaction.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.6
• /
• pp.1491-1495
• /
• 2007

Due to proliferation of Digital cameras and high-speed digital printers, anyone can do easily digital photo shoot and print services, but album manufacture for celebrating the graduation or marriage, and a hundred days needs a lot of capacity of image files and requires high quality, therefore that is working in the photo studio's to the whole responsibility. In this paper, we show all album process to product album manufacture quickly and accurately using high-quality template and variety of libraries, and propose CTS(computerized typesetting system) to build album, which separates a role of photo studio, processing laboratory and printing house and can revolutionize a working process.

• Science of Emotion and Sensibility
• /
• v.11 no.3
• /
• pp.375-385
• /
• 2008

This study intended to grasp image association on human's product and cognition response characteristic, and analyze their correlation with product preference. For this, photos of mobile phones and proposal-type products were selected for experiment stimuli, and an experiment expressing associated word and an experiment evaluating preference of each product's photo were made. With the experiments, two results were derived. First, in linguistic cognition response on product with use experience, application of emotional expression increased as the level of preference increased by mixing expressions of metaphor languages and emotional image. Second, non-use experience of product induces response corresponding to understanding on the object of cognition only perceptually and considering similarities with general experience information.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2001.10a
• /
• pp.186-189
• /
• 2001

The main method in micro-etching process, used in manufacturing semiconductors, electronic components, circuits, is Photo Masking method that exposes and develops on the photo-sensitivity solutions or films. This method enables one to process highly precisely, $\pm$0.03 mm in end line location area. But this has limits in a high speed / wide width process, difficulties in endless masking, and the problem of high price. We have developed the direct masking method to make use of Gravure printing, widely used in grocery packing sheet printing. We made cylinder tools to influence the masking quality by laser stream process. We have confirmed that the end line location accuracy in the line width of the product is improved from 0.12 mm to $\pm$0.07 mm level, after etching process.

• Design & Manufacturing
• /
• v.12 no.1
• /
• pp.47-51
• /
• 2018

As the IT industry rapidly progresses, the functions of electronic devices and display devices are integrated with high density, and the model is changed in a short period of time. To implement the integration technology, a uniform micro-pattern implementation technique to drive and control the product is required. The most important technology for the micro pattern generation is the exposure processing technology. Failure to implement the basic pattern in this process cannot satisfy the demands in the manufacturing field. In addition, the conventional exposure method of the mask method cannot cope with the small-scale production of various types of products, and it is not possible to implement a micro-pattern, so an alternative technology must be secured. In this study, the technology to implement the required micro-pattern in semiconductor processing is presented through the photolithography process and plasma etching.