• 한국식품영양과학회지
• /
• 제24권3호
• /
• pp.427-433
• /
• 1995

The optimal condition for hydrolysis of oyster was evaluated with proteases using response surface methodology(RSM). Among 11 commerical proteases, APLTM 440 was selected as the suitable protease for producing oyster hydrolysate on the basis of cost per unit enzyme activity. The effect of autolysis on degree of hydrolysis in oyster was negligible comparing to that of APL 440 protease treatment. From RSM and ridge analysis, the conditions favoring the highest degree of hydrolysis were pH 9.95, 61.1$^{\circ}C$, 2.64 hr reaction time, 49.2% substrate, and 0.35% enzyme/substrate ratio. Oyster hydrolysate prepared under optimal conditions shwoed virtually 51.98% of hydrolysis.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제13권3호
• /
• pp.332-337
• /
• 1991

Kimura's disease is a chronic inflammatory condition producing subcutaneous tumor-like nodules mainly head and neck regions. Elevated serum Ig E levels and peripheral blood eosinophilia are common. Kimura's disease represents and aberrant immune reaction to an as yet unknown stimulus. This case presented is 27 year old female whose chief complaint were painful swelling on Rt cheek and temporal area and diagnosed as Kimura's disease. We preformed surgical excision of the mass on Rt. cheek and temporal area and reconstructed with temporal flap and about 100 cc of free fat graft on the defect of Rt. cheek.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.168-171
• /
• 2005

The conception of the passive lossless snubber with the simpler is presented. Thus a necessity condition of the passive lossless soft switching converter with the simplest topology is directed. A novel passive regenerative snubber called soft snubber applied to a hard switching converter is proposed. The passive snubber consists of a snubber inductor, two snubber rectifiers, and a snubber capacitor. The losses are reduced by inserting a snubber inductor in the series path of the rectifier during it's turn off. It is so simple that can make energy reset or capacitor discharged directly without producing any current circulation. To show the superiority of this converter is verified through the experiment with a 640W, 100kHz prototype converter.

• 한국자원식물학회지
• /
• 제7권1호
• /
• pp.23-27
• /
• 1994

The growing condition and the point at issue were investigated for utilization as a fundamental data of the Boxthorn research in the growing farm household, which was chief producing district of Box-thorn in Chongyang, Chungmam province. The results were summarized as follow'; Lycium fruit wasproduced 445M/. in the 170.4ha. In practical cultivation, major numbers of decapitation were threetimes,, and planting distance was dense planting, and also amount of applied fertilizer was beyondbasic-fertilizer level and number of split application was abundant.Numbers of harvesting were six-ten times, and many labor was requiremented.The issues in cultivation were development of processing technique, supplement of varieties whichhave disease tolerance, superior quality and high yielding, improving of cultivation methods for laborsaving and magnification of demand.

• 설비공학논문집
• /
• 제3권4호
• /
• pp.276-285
• /
• 1991

The transient heat transfer characteristics in the radiant heating panel were predicted by numerical analysis. Thermal behaviors of panel, such as temperature distributions in panel and convective and radiative heat fluxes in panel surface with respect to time were obtained. Heating hours per day, rate of energy supplied and maximum temperature differences at panel surface were also compared for several important parameters. The performance and thermal comfort of heating panel were studied and compared for various operating and design conditions such as pipe pitch, pipe location, pipe diameter and flow rate of hot water for the purpose of producing useful data, which can be used for the test and decision of efficient operating condition of the conventional heating systems or the optimal design of the new panel heating systems.

• 한국산학기술학회논문지
• /
• 제6권5호
• /
• pp.373-377
• /
• 2005

본 논문에서는 반도체 제조장비의 챔버 내부 가스누출을 방지하기위한 보완모듈을 제시하였다. MFC(mass flow controller) 다음단의 최종밸브와 챔버 사이의 가스관에 압력센서를 부착시켜, 압력센서의 신호와 최종밸브의 동작신호를 디지털 회로를 이용하여 실시간으로 감지하고 가스누출을 방지하도록 하였다. LED 모듈을 이용하여 공정중에 발생하는 2차 소성물로 인한 가스의 흐름과 관련된 시스템 고장을 표시한다. 본 연구에서 개발한 모듈을 이용하면 챔버 내에서의 가스누출로 인한 장비의 손상과 안전사고 등을 예방하는 효과가 있다.

• 대한전기학회논문지
• /
• 제38권3호
• /
• pp.173-181
• /
• 1989

A split-phase induction motor with asymmetrical magnetizing reactance axes develops starting torque and its efficiency can be high under certain conditions. In this paper, one method of producing the asymmetry of magnetizing reactance axes is described. The grain-oriented silicon steel core is used to produce the asymmetric axes instead of non-oriented silicon steel core which is used in general motors. The optimum design method for the motor is suggested and analyzed. To verify this suggestion, the permanent capacitor run type induction motors are designed to be driven at balanced condition by its asymmetrical effect, and then the oscillating torque due to the asymmetry of motor structures are analyzed. Tests of the sample motor have shown good performance comparable to ordinary types. This motor structure can be used where high effciency and reliability are required, and also the amount of core materials can be reduced due to its high permeability.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• 제4B권3호
• /
• pp.103-107
• /
• 2004

Recently, greater attention has been paid to the high-speed generator for its many merits, such as ease of installation, high efficiency and high power density. However, due to their high fundamental frequency, careful consideration needs to be given to both electromagnetic and mechanical design issues. This paper deals with the comparison of two types of permanent magnet high-speed machines. Specifically, the effect of the permanent magnet magnetization pattern on the rotor losses is investigated. On the basis of analytical field analysis and the 2-D finite element method, this paper predicts the flux harmonics and rotor losses under the no-load condition. It is shown that the Halbach magnetization is superior to parallel magnetization in terms of producing rotor losses.

• 한국구조물진단유지관리공학회 논문집
• /
• 제2권4호
• /
• pp.159-171
• /
• 1998

This study attempts to develop a rational approach to flexural concrete beam analysis with crack growth. In order to develope analytical solutions, several simplification and assumption are made and the Hillerborg fictitious crack model is adapted for new rational approach to the flexural concrete beam. To provide desired results, the concrete beams with various conditions(more than 126 beam conditions) are analyzed. Before producing the results, these assumptions are founded to be justified by comparison with a FE analysis. The results for each condition of the beams are presented in terms of crack lengths, the strength and cracking stability of concrete beams. And also size effects in a flexural concrete beam is studied using a new flexural cracking model.

• 기술사
• /
• 제45권6호
• /
• pp.28-32
• /
• 2012

Namhae chemical is one of the largest fertilizer manufacturing company in Korea which company has operating 4 unit agitator gear boxes and producing variety kinds of fertilizer production. The gearbox operating temperature of agitator is approximated in $55^{\circ}C{\sim}90^{\circ}C$ and required to keep operating continuous without stopping. The system required high performance oil and longer oil drain interval as limited workforce in maintenance team. It was lubricated by mineral gear oil of ISO VG 320 and also need to change to new oil frequently. Namhae Chemical would expect to keep stable operating condition without shut down and consider, lower cost of operation and equipment protection.