• Food Science and Preservation
• /
• v.22 no.6
• /
• pp.920-925
• /
• 2015

The microbial composition in Nuruk, a Korean cereal fermentation starter, is a critical factor for the quality and organoleptic properties of traditional alcoholic beverages. This study was aimed at monitoring the compositional change and enzyme activity of culturable lactic acid bacteria (LAB) in two types of Nuruk fermented at different temperatures. All culturable LAB were isolated at various time points (0, 3, 6, 10, 20, and 30 days) and identified by 16S rRNA sequencing. In traditional Nuruk type A (TN-A), which was fermented at $36^{\circ}C$, the population of total culturable LAB during the fermentation period was between $10^4$ and $10^5$ log CFU/mL. On the other hand, the LAB population in traditional Nuruk type B (TN-B) fermented at $45^{\circ}C$ (primary fermentation for 10 days) and $35^{\circ}C$ (secondary fermentation for 20 days) was $10^2$ log CFU/mL; however, these bacteria could not be detected after 6 days. Major LAB strains were identified in both Nuruk types: (1) from the MRS-culture of TN-A, Pediococcus pentosaceus at 3-30 days; (2) from MRS-culture of TN-B, P. pentosaceus at 3 days and Enterococcus hirae at 6 days. The protease activities of the dominant LAB isolated from the TN-A and TN-B cultures were within the ranges of 0.64~1.03 mg/mL and 0.74~0.81 mg/mL (tyrosine content), respectively, whereas the ${\alpha}$-amylase activities were 0.75~0.98 mg/mL and 0.78~0.79 mg/mL (amylose content), respectively.

• Korean Journal of Food Science and Technology
• /
• v.27 no.3
• /
• pp.281-285
• /
• 1995

The persimmon leaf tea was produced from persimmon leaves by three different methods (conventional, steamed, fermented) and the changes of total vitamin C and superoxide dismutase(SOD)-like activity were investigated. The amount of total vitamin C was the highest in fermented persimmon leaf tea which was 47% of total vitamin C of raw persimmon leaves. The SOD-like activity of conventional and fermented persimmon leaf teas were a little higher than that of steamed. The total vitamin C of steamed persimmon leaf tea was decreased slowly as the extraction time was increased. That of fermented persimmon leaf tea was increased generally at $60^{\circ}C\;and\;70^{\circ}C$, and increased until 5min and then decreased at $80^{\circ}C\;and\;90^{\circ}C$, The optimum extraction condition of total vitamin C in fermented persimmon leaf tea was 3min and 5min at $80^{\circ}C\;and\;90^{\circ}C$, 5min and 10min at $60^{\circ}C$. The total vitamin C of conventional persimmon leaf tea was so little that could not be measured by DNP method. The SOD-like activity of conventional and steamed persimmon leaf teas were increased and that of fermented showed the trend of increasing-decreasing-increasing. Fermented persimmon leaf tea had higher SOD-like activity than conventional and steamed at all tested conditions, and the optimum extraction condition of SOD-like activity was 3min and 10min at $80^{\circ}C\;and\;90^{\circ}C$.

• Korean Journal of Food Science and Technology
• /
• v.29 no.3
• /
• pp.502-508
• /
• 1997

Rice bran dietary fiber extract, which was obtained after termamyl treatment of defatted rice bran contained $27.3{\sim}30.5%$ protein, $49.7{\sim}54.1%$ insoluble dietary fiber, and $1.9{\sim}2.7%$ soluble dietary fiber. Extrusion decreased the insoluble dietary fiber content but increased the soluble dietary fiber content, while roasting did not. Influence those content. Each mineral element content was depended upon heat processing method. Extrusion increased the water binding capacity and L value, while roasting reduced the water binding capacity and L value. Scanning electron microscopy showed damaged cell walls for extruded sample compared to roasted one which had fully collapsed cell walls. The increase of water absorption, developing time, and stability and the of MTI of wheat flour-dietary fiber extract composites with addition of dietary fiber extract were observed by Farinograph. Rice bran dietary fiber extract had an effect on the bread making resulting in increase of bread weight and color of crumb and crust, and decrease of bread volume and texture. As a result of sensory evaluation, appearance, texture, overall acceptability were significantly different from control but flavor and taste were not different significantly up to 6% level. Heat treated samples had differences in mean values, but not significant differences statistically.

• KIPS Transactions on Software and Data Engineering
• /
• v.5 no.9
• /
• pp.441-450
• /
• 2016

In this study, we investigate the effect of the level of cognitive affordance which explains an explicit interaction method on the interest of viewers. Viewer's recognition of the interaction method is associated with cognitive affordance as a matter of visual-perceptual exposure of the input device and viewer's cognition of it. The final goal of the research on affordance is to enhance the audience participation rather than the smooth interation. Many interactive media artworks have been designed with hiding the explicit explanation to the artwork due to worry that the explicit explanation may also hinder the induction of impressions leading the viewer to an aesthetic experience and the retainment of interest. In this context, we set up two hypotheses for study on cognitive affordance. First, the more explicit the explanation of interaction method is, the higher the viewer' understanding of interaction method is. Second, the more explicit the explanation of interaction method is, the lower the interest of the viewer is. An interactive media art work was manufactured with three versions which vary in the degree of visual-perceptual information suggestion and we analyzed the participation and interest level of audience in each version. As a result of the experiments, the version with high explicitness of interaction was found to have long time spent on watching and high participation and interest of viewers. On the contrary, the version with an unexplicit interaction method was found to have low interest and satisfaction of viewers. Therefore, regarding usability, the hypothesis that a more explicit explanation of interaction would lower the curiosity and interest in exploration of the viewer was dismissed. It was confirmed that improvement of cognitive affordance raised the interaction of the work of art and interest of the viewer in the proposed interactive content. This study implies that interactive media art work should be designed in view of that the interaction and interest of audience can be lowered when cognitive affordance is low.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.37 no.1
• /
• pp.1-12
• /
• 2010

The aim of this study was to evaluate the preventive effect of commercially available anticariogenic products, specifically, the tooth cream containing Casein phosphopeptide-amorphous calcium phosphate(CPP-ACP), fluoride varnish and low-level fluoride mouthrinse on enamel erosion induced by carbonated beverage in a short period of time. Enamel specimens were treated as follows and were then kept in artificial saliva for 24 hours followed by further processing by alternately soaking them in Cola beverage and in distilled water for 1 minute each five times. Group 1: control group (no treatment) Group 2: tooth cream with CPP-ACP Group 3: fluoride varnish (1,000 ppm F) Group 4: low-level fluoride mouthrinse (227 ppm F) Group 5: fluoride varnish + tooth cream with CPP-ACP Group 6: low-level fluoride mouthrinse + tooth cream with CPP-ACP Microhardness and erosion depth were measured and the mineral loss of each specimen was evaluated by measuring the volumetric fluorescence change(${\Delta}Q$) against the stable fluorescent grid using quantitative light-induced fluorescence(QLF). The experiment lasted for 6 days repeated each day. The results were as follows: 1. The microhardness was increased as follows: Group $1{\leq}2{\leq}4$<6<$3{\fallingdotseq}5$. 2. The mean erosion depth was increased as follows: Group $5{\fallingdotseq}3$<6<$4{\fallingdotseq}2{\fallingdotseq}1$. 3. The ${\Delta}Q$ was increased as follows: Group $1{\fallingdotseq}2{\leq}4{\leq}6{\leq}3{\fallingdotseq}5$. The decrement of ${\Delta}Q$ was similar between group 1 and 2, group 4 and 6 and group 3 and 5. 4. The ${\Delta}Q$ showed positive correlation with microhardness (r=0.96, p<0.05), while it was negatively correlated to erosion depth (r=-0.96, p<0.05).

• Journal of Life Science
• /
• v.16 no.7 s.80
• /
• pp.1133-1140
• /
• 2006

Human HtrA1 (High temperature requirement protein A1) is a homologue of the E. coli periplasmic serine protease HtrA. A recent study has demonstrated that HtrA1 is a serine protease involved in processing of insulin like growth factor binding protein (ICFBP), indicating that it serves as an important regulator of IGF activity. Additionally, several lines of evidence suggest a striking correlation between proteolytic activity of HtrA1 serine protease and the pathogenesis of several diseases; however, physiological roles of HtrA1 remain to be elucidated. We used the pGEX bacterial expression system to develop a simple and rapid method for purifying HtrA1, and the recombinant HtrA1 protein was utilized to investigate the optimal conditions in executing its proteolytic activity. The proteolytically active HtrA1 was purified to approximately 85% purity, although the yield of the recombinant HtrA1 protein was slightly low $460{\mu}g$ for 1 liter E. coli culture). Using in vitro endoproteolytic cleavage assay, we identified that the HtrA1 serine protease activity was dependent on the enzyme concentration and the incubation time and that the best reaction temperature was $42^{\circ}C$ instead of $37^{\circ}C$. We arbitrary defined one unit of proteolytic activity of the HtrA1 serine protease as 200nM of HtrA1 that cleaves half of $5{\mu}M\;of\;{\beta}-casein$ during 3 hr incubation at $37^{\circ}C$. Our study provides a method for generating useful reagents to investigate the molecular mechanisms by which HtrA1 serine protease activity contributes in regulating its physiological function and to identify natural substrates of HtrA1.

• Journal of Life Science
• /
• v.22 no.10
• /
• pp.1295-1306
• /
• 2012

A microorganism producing carboxymethylcellulase (CMCase) was isolated from seawater and identified as Bacillus atrophaeus. This species was designated as B. atrophaeus LBH-18 based on its evolutionary distance and the phylogenetic tree resulting from 16S rDNA sequencing and the neighbor-joining method. The optimal conditions for rice bran (68.1 g/l), peptone (9.1 g/l), and initial pH (7.0) of the medium for cell growth was determined by Design Expert Software based on the response surface method; conditions for production of CMCase were 55.2 g/l, 6.6 g/l, and 7.1, respectively. The optimal temperature for cell growth and the production of CMCase by B. atrophaeus LBH-18 was $30^{\circ}C$. The optimal conditions of agitation speed and aeration rate for cell growth in a 7-l bioreactor were 324 rpm and 0.9 vvm, respectively, whereas those for production of CMCase were 343 rpm and 0.6 vvm, respectively. The optimal inner pressure for cell growth and production of CMCase in a 100-l bioreactor was 0.06 MPa. Maximal production of CMCase under optimal conditions in a 100-l bioreactor was 127.5 U/ml, which was 1.32 times higher than that without an inner pressure. In this study, rice bran was developed as a carbon source for industrial scale production of CMCase by B. atrophaeus LBH-18. Reduced time for the production of CMCase from 7 to 10 days to 3 days by using a bacterial strain with submerged fermentation also resulted in increased productivity of CMCase and a decrease in its production cost.

• Korean Journal of Construction Engineering and Management
• /
• v.5 no.5 s.21
• /
• pp.183-192
• /
• 2004

Even in Korea the number of steel structure buildings that allow internal space and easy change of their layouts in accordance with the purpose of buildings and box-type steel bridges constructed with thick plates with thickness in a rage just from a few $\beta$AE to \$100\beta$AE is increasing these days and therefore, domestic fabrication and processing technology of members for steel structures is being improved at a pace faster than in the past to meet the growing requirements of consumers for high reliability on quality control on the related steel structures. However, most domestic fabricators os steel structures who are turning out their steel products in accordance with the designs prepared by engineering companies in their respective works for the sake of cost cut more than anything else, hesitating to introduce any advanced new technology into themselves. In the case of the steel structure design application for small and mid-size buildings in particular, it is quite meaningful not only for those who are involved in steel structure business, but also for the people working at construction work fields to review the result of the study on the connections of steel structure members deigned to obtain superb quality of steel structures within short period for steel fabrication and erection at fields in economical ways, as there is a glowing tendency seeking standardization of connection of steel structure members as well as whole structure together with the development on design of construction system of buildings including their exterior and interior decoration materials, manufacture of the related members and fabrication technique structure. This paper has been prepared with the aim to review the peculiar characteristics of buildings constructed with the main frames of steel structures and actual cases of the change made ing the connections between steel structure columns and between columns and girder members in order to reduce the work period necessary for fabrication and erection of steel structures at the maximum as well as the some examples of steel structures fabricated through automatic welding by robots for box-type columns in addition to the description of the problems found in the course of fabricating those steel structures, suggesting possible counter-measures to solve them.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2000.11a
• /
• pp.3-4
• /
• 2000

Many researchers are interested in the synthesis and characterization of carbon nitride and diamond-like carbon (DLq because they show excellent mechanical properties such as low friction and high wear resistance and excellent electrical properties such as controllable electical resistivity and good field electron emission. We have deposited amorphous carbon nitride (a-C:N) thin films and DLC thin films by shielded arc ion plating (SAIP) and evaluated the structural and tribological properties. The application of appropriate negative bias on substrates is effective to increase the film hardness and wear resistance. This paper reports on the deposition and tribological OLC films in relation to the substrate bias voltage (Vs). films are compared with those of the OLC films. A high purity sintered graphite target was mounted on a cathode as a carbon source. Nitrogen or argon was introduced into a deposition chamber through each mass flow controller. After the initiation of an arc plasma at 60 A and 1 Pa, the target surface was heated and evaporated by the plasma. Carbon atoms and clusters evaporated from the target were ionized partially and reacted with activated nitrogen species, and a carbon nitride film was deposited onto a Si (100) substrate when we used nitrogen as a reactant gas. The surface of the growing film also reacted with activated nitrogen species. Carbon macropartic1es (0.1 -100 maicro-m) evaporated from the target at the same time were not ionized and did not react fully with nitrogen species. These macroparticles interfered with the formation of the carbon nitride film. Therefore we set a shielding plate made of stainless steel between the target and the substrate to trap the macropartic1es. This shielding method is very effective to prepare smooth a-CN films. We, therefore, call this method "shielded arc ion plating (SAIP)". For the deposition of DLC films we used argon instead of nitrogen. Films of about 150 nm in thickness were deposited onto Si substrates. Their structures, chemical compositions and chemical bonding states were analyzed by using X-ray diffraction, Raman spectroscopy, X-ray photoelectron spectroscopy and infrared spectroscopy. Hardness of the films was measured with a nanointender interfaced with an atomic force microscope (AFM). A Berkovich-type diamond tip whose radius was less than 100 nm was used for the measurement. A force-displacement curve of each film was measured at a peak load force of 250 maicro-N. Load, hold and unload times for each indentation were 2.5, 0 and 2.5 s, respectively. Hardness of each film was determined from five force-displacement curves. Wear resistance of the films was analyzed as follows. First, each film surface was scanned with the diamond tip at a constant load force of 20 maicro-N. The tip scanning was repeated 30 times in a 1 urn-square region with 512 lines at a scanning rate of 2 um/ s. After this tip-scanning, the film surface was observed in the AFM mode at a constant force of 5 maicro-N with the same Berkovich-type tip. The hardness of a-CN films was less dependent on Vs. The hardness of the film deposited at Vs=O V in a nitrogen plasma was about 10 GPa and almost similar to that of Si. It slightly increased to 12 - 15 GPa when a bias voltage of -100 - -500 V was applied to the substrate with showing its maximum at Vs=-300 V. The film deposited at Vs=O V was least wear resistant which was consistent with its lowest hardness. The biased films became more wear resistant. Particularly the film deposited at Vs=-300 V showed remarkable wear resistance. Its wear depth was too shallow to be measured with AFM. On the other hand, the DLC film, deposited at Vs=-l00 V in an argon plasma, whose hardness was 35 GPa was obviously worn under the same wear test conditions. The a-C:N films show higher wear resistance than DLC films and are useful for wear resistant coatings on various mechanical and electronic parts.nic parts.

• Journal of Intelligence and Information Systems
• /
• v.20 no.1
• /
• pp.133-148
• /
• 2014

Recently, with the advent of various information channels, the number of has continued to grow. The main cause of this phenomenon can be found in the significant increase of unstructured data, as the use of smart devices enables users to create data in the form of text, audio, images, and video. In various types of unstructured data, the user's opinion and a variety of information is clearly expressed in text data such as news, reports, papers, and various articles. Thus, active attempts have been made to create new value by analyzing these texts. The representative techniques used in text analysis are text mining and opinion mining. These share certain important characteristics; for example, they not only use text documents as input data, but also use many natural language processing techniques such as filtering and parsing. Therefore, opinion mining is usually recognized as a sub-concept of text mining, or, in many cases, the two terms are used interchangeably in the literature. Suppose that the purpose of a certain classification analysis is to predict a positive or negative opinion contained in some documents. If we focus on the classification process, the analysis can be regarded as a traditional text mining case. However, if we observe that the target of the analysis is a positive or negative opinion, the analysis can be regarded as a typical example of opinion mining. In other words, two methods (i.e., text mining and opinion mining) are available for opinion classification. Thus, in order to distinguish between the two, a precise definition of each method is needed. In this paper, we found that it is very difficult to distinguish between the two methods clearly with respect to the purpose of analysis and the type of results. We conclude that the most definitive criterion to distinguish text mining from opinion mining is whether an analysis utilizes any kind of sentiment lexicon. We first established two prediction models, one based on opinion mining and the other on text mining. Next, we compared the main processes used by the two prediction models. Finally, we compared their prediction accuracy. We then analyzed 2,000 movie reviews. The results revealed that the prediction model based on opinion mining showed higher average prediction accuracy compared to the text mining model. Moreover, in the lift chart generated by the opinion mining based model, the prediction accuracy for the documents with strong certainty was higher than that for the documents with weak certainty. Most of all, opinion mining has a meaningful advantage in that it can reduce learning time dramatically, because a sentiment lexicon generated once can be reused in a similar application domain. Additionally, the classification results can be clearly explained by using a sentiment lexicon. This study has two limitations. First, the results of the experiments cannot be generalized, mainly because the experiment is limited to a small number of movie reviews. Additionally, various parameters in the parsing and filtering steps of the text mining may have affected the accuracy of the prediction models. However, this research contributes a performance and comparison of text mining analysis and opinion mining analysis for opinion classification. In future research, a more precise evaluation of the two methods should be made through intensive experiments.