• Journal of Biosystems Engineering
• /
• 제42권1호
• /
• pp.69-74
• /
• 2017

Purpose: The purpose of this study is to analyze turbidity and quality characteristics of white rice as a function of main shaft blast velocity and to verify the optimum processing conditions in the cutting type white rice processing system (CTWRPS). Methods: Sindongjin, one of the rice varieties, which used to be produced in Gimje-si, Jeollabuk-do, in 2015, was used as the experimental material. Turbidity and quality characteristics of white rice were measured at three different main shaft blast velocities: 25, 30, and 35 m/s. The amount of test material used for a single experiment was 20 kg, and after processing, whiteness was found to be $42.5{\pm}0.5$, following which, turbidity and quality characteristics were measured. Results: Turbidity decreased with increase in the shaft blast velocity, and as a result, was lowest at 35 m/s of shaft blast velocity among all the other experiment velocities. The trend of cracked rice ratios was similar to the turbidity. Broken rice ratio turned out to be less than 2.0% in all the test conditions. In the first stage of processing, the processing pressure decreased as the main shaft blast velocity increased. Additionally, in the second stage of processing, the processing pressure was at its lowest value at the main shaft blast velocity of 35 m/s. Energy consumption, too, decreased as the main shaft blast velocity was increased. Conclusions: From the above results, it is concluded that the main shaft blast velocity of 35 m/s is best for reducing turbidity and producing high quality rice in a CTWRPS.

• 한국작물학회지
• /
• 제38권6호
• /
• pp.513-523
• /
• 1993

쌀의 이용성 증진과 쌀 가공적성 육종을 위한 기초자료를 얻고자 쌀의 아밀로스함량 및 호화특성이 크게 다른 벼 24품종에 대한 쌀 배유전분의 구조 및 물성의 차이를 비교 분석한 결과를 요약하면 다음과 같다. 1. 쌀 전분-요-드 정색반응의 최대흡수파장이 찰은 520nm, 메는 560nm～600nm까지로서 이밀로스 함량이 높은 품종일수록 길어지는 경향이 있었고 비슷한 아밀로스함량 수준에서도 품종에 따라 최대흡수파장에 다소 차이가 있었다.2. 쌀 품종별 전본의 글루코오스쇄장분포 비교에 의하면 Fr. I에서 가장 큰 품종간 차이를 나타내었고 다음으로 중간분획(Int. Fr).과 Fr. III/Fr. II율에서 품종간 차이가 크게 나타났으며, 특히 아밀로펙틴의 미세구조를 나타내는 Fr.III/Fr. II율은 찹쌀이 멥쌀보다 높은 경향이었으나 멥쌀간에는 아밀로스함량과는 관계없이 품종간 차이를 나타내었다. 3. 알칼리 붕괴도가 낮은 품종일수록 전분입자의 50% 산 가수분해 소요시간이 길었으며, 호응집성이 경질인 품종과 연질이 품종들 모두에서 50% 산 가수분해 소요시간에 품종간 차이를 나타내었다. 또한 호응집성이 경질인 품종일수록 Fr. III의 분포가 낮고 Fr. I의 분포 및 아밀로스 함량은 높은 경향이었다. 4. 쌀의 전분구조 및 특성과 쌀의 이화학적특성에 따라 주성분분석에 의하여 공시품종들을 6개군으로 분류할 수 있었는데 이는 주로 아밀로스관련 성분과 아밀로펙틴 구조성분에 따라 군집화 되었다.

• 한국식품과학회지
• /
• 제45권5호
• /
• pp.613-618
• /
• 2013

아밀로오스 함량의 차이가 있는 품종별 현미를 대상으로 frying 처리와 파보일링 처리를 통해 품질 특성을 조사하였다. 품종별 현미의 용융 흡열 곡선을 관찰한 결과 amylose 함량이 증가할수록 호화 엔탈피가 감소되는 경향이 관찰되었으며, amylograph 측정결과 현미 중 효소의 불활성화를 위해 $HgCl_2$ 처리와 전분입자의 팽윤정도에 따라 영향을 미치는 것을 확인할 수 있었다. Gelatinization temperature는 Ilpumbyeo가 가장 높은 것으로 나타났으며, Goami가 maximum viscosity와 breakdown 값이 가장 높은 수치를 보여주었다. X-선 회절도 분석 결과 일품벼 백미의 경우 결정형이 소실된 V형, 일품벼 현미의 경우 B형의 결정체에 가까운 것이 관찰되었다. 가공처리에 따른 주사전자현미경 측정결과 파보일링 처리 후 튀긴 경우 amylose 함량이 높을수록 표면이 둥근 형태를 띠는 것을 확인할 수 있었다. 또한, 수침 후 파보일링 처리 후 튀긴 경우가 수침처리만 한 후 튀긴 경우보다 전체적으로 강도와 경도 측정결과 더 높은 것을 확인 할 수 있었다.

• Journal of Biosystems Engineering
• /
• 제3권1호
• /
• pp.47-63
• /
• 1978

This study was conducted to obtain a basic information necessary to assess present rice milling technology in Korea The profiles for milling plants was analyzed by survey work.For the private custom-work mills, which process about 80 percent of domestic rice consumption ,their actual milling test for the identical samples as used for filed mills was conducted. Two rice varieties Japonica and Tongil-type were associated with the experiments. The results are summarized as follows: 1. Analyses for private custom-work mills showed their general aspects as; about 91 percent of the mills belonged to an individual owner ship ; more than 93 percent of the mills was established earlier than 1950 ; about 80 percent of the mills was powered with electric motor; mills having less than two employees were about 75 percent; about 45 percent of the mills provided for warehouse in storing customers cereal grains. 2. The polishers installed in 1,255mills within the surveyed area (7 counties) have been supplied by 44 different domestic manufacturers ;in but about 60 percent of which was supplied by 6major manufacturers. The polishers could be classified into two categories in terms of principles of their polishing actions ;jet-pearler and friction types. About 51 percent of the mills was equipped with the former which has been recognized as giving greater milling recovery than the friction types. 3. Reason for owners of private mills to supplement new machines was due mainly to pgrading their mills to meet the requirements that established by the Government. However, about 60 percent of the mill owners intended to replace with new pearler by their own needs to meet with new high yielding varieties. 4. Processing systems of each previate rice mills surveyed could be classified into three categories, depending upon whether the systems posessed such components as precleaner and paddy separator or not. Only 36.7 percent of mills was installed with both precleanr ad paddy seperrator, 5.0 percent of mills did have neither percleaner nor paddy seperator, and rest of them equipped only one of the two. Hence,it is needed for about 63% of rice miils to be supplemented with these basic facilities to meet with the requirements for the standaized system. 5. Actual milling capacity measured at each field rice mills was shown a wide variation, having range from about 190 to 1,210 kg/hr. The percentages of mills classified according to daily milling capacity based on this hourly capacity were 24.3% for the capacity less than 3 M/T a day; 20.0% for 3-4 M/T; 15.6% for 4-5 M/T; 6.7% for 5-6 M/T; 22.3% for 6-7 M/T; and 11.0% for more than 7 M/T a day. 6. Actual amount of rice processed was about 310 M/T a year in average. About 42% of total milled rice was processed during October to Decembear, which formed a peak demand period for rice mills. The amount of rice milled during January to May was relatively small, but it had still a large amount compared to that during June to September. 7. Utilization rate of milling facility, i. e., percentage of the actual amount of milled rice to the capacity of rice mills, was about 18% on the year round average, about 41% in the peak demand season, and about 10% during June to September. Average number of operating days for mills surveyed was about 250 days a year, and about 21 days a month. 8. Moisture contents of paddy at the time of field mill tests were ranged 14.5% to 19.5% for both Japonica and Tong-i] varieties, majority of paddy grains having moisture level much higher than 1530. To aviod potential reduction of milling recovery while milling and deterioration of milled rice while storage due to these high grain mJisture contents, it may be very important for farmers holding rice to dry by an artificial drying method. 9. Milling recovery of JapJnica varieties in rice mills was 75.0% in average and it was widely ranged from 69.0% to 78.0 % according to mills. Potential increase in milJing recovery of Japonica variety with improvement of mill facilities was estimated to about 1.9%. On the other hand, milling recovery of Tong-il varieties in the field mill tests was 69.8% in average and it ranged from 62% to 77 %, which is much wider than that of Japonica varieties. It is noticed that the average milling recovery of Tong-il variety of 69.8% was much less than that of the Japonica-type. It was estimated th3.t up to about 5.0% of milling recovery for Tong-il variety could be improved by improving the present lo'.ver graded milling technology. 10. Head rice recoveries, as a factor of representing the quality of commercial goods, of Japonica and Tong-il varieties were 65.9% and 53.8% in average, and they were widely ranged from 52% to 73% and from 44% to 65% , respectively. It was assessed that head rice recovery of Japonica varieties can be improved up 3.3% and that of Tong-il varieties by 7.0% by improving mill components and systems.

• 한국식품과학회지
• /
• 제48권1호
• /
• pp.20-26
• /
• 2016

본 연구는 다수확 품종 쌀의 가공 이용성 증진을 위해 식미가 좋은 일반계통과 식미는 다소 떨어지지만 다수확 품종인 통일계통을 시료로 하여 일반성분, 영양성분 비교 분석 및 품질특성을 비교한 결과는 다음과 같다. 쌀 품종별 수분함량은 6.23-6.91%로 유의적 차이를 보이지 않았고, 조단백질 함량은 안다벼가 8.13%로 높았으며, 조회분 함량은 일미벼, 한아름 및 안다벼가 0.52-0.55%로 높았다. 조지방 함량은 일미벼가 1.24%로 가장 높았다. amylose 함량은 안다벼가 24.67%로 가장 높았고, 일미벼는 16.61%로 가장 낮았다. 유리당 함량은 호품벼가 656.51 mg%로 가장 높았고, 아미노산은 안다벼가 7,295,64 mg%로 시료구 중 가장 높았다. 품종별 vitamin $B_1$ 함량은 한아름벼 품종이 0.51 mg%로 가장 높았고, vitamin $B_2$ 는 호품벼와 일미벼 품종에서만 소량 검출되었다. 품종에 따른 쌀가루의 수분흡수지수는 일미벼와 인디카벼가 1.73으로 가장 높았고, 호품벼는 1.22로 가장 낮았다. 수분용해지수는 일미벼가 6.03%으로 가장 높았고, 호품벼는 3.26%로 가장 낮았다. 쌀가루의 팽윤력은 일미벼, 호평벼, 호품벼, 한아름벼 및 안다벼는 $80^{\circ}C$와 $85^{\circ}C$ 사이에서 급격하게 증가하는 경향을 보였으며, 인디카벼는 $70^{\circ}C$와 $75^{\circ}C$ 사이에서 급격하게 증가하는 경향을 보였다. 용해도는 $75^{\circ}C$와 $80^{\circ}C$ 사이에서 급격하게 증가하는 경향을 보였고, 전반적으로 일미벼의 용해도가 높은 것으로 나타났다. Amylograph에 의한 호화 특성조사 결과 인디카벼가 387.00 BU로 가장 높았고, 한아름벼는 201.67 BU로 가장 낮은 것으로 나타나 인디카벼가 가장 노화 경향이 큰 것으로 나타났으며, 한아름벼는 쌀가루 페이스트의 노화가 가장 지연되는 품종으로 나타났다. 따라서 다수확 품종인 안다벼와 한아름벼는 아밀로오스 함량이 높아 제빵 적성에 부합할 것으로 판단된다. 또한 아미노산과 vitamin $B_1$ 함량이 높았고, 노화특성에서 한아름벼가 페이스트의 노화가 지연 되는 품종으로 확인되어 가공용으로의 충분한 활용 가치가 있을 것으로 판단된다.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2022년도 추계학술대회
• /
• pp.48-48
• /
• 2022

In recent, a demand for sweetpotato cultivation technology to expand the cultivated area of field crops in paddy fields is increasing. This research was carried out to establish suitable varieties and cultivation techniques for mass production of sweetpotato for processing raw materials. For the selection of varieties suitable for cultivation in rice fields for each processing purpose, 12 varieties in 2018 (8 varieties for starch, 4 as dried, chips and beverages), and 6 varieties in 2019 (4 varieties for starch including 'Daeyumi'; chips, semi-dried 'Pungwonmi'; beverage and coloring 'Shinjami') were used. Sweetpotato stems were planted in mid-May and harvested after 120 days to investigate the yield. Results revealed that the yield of sweetpotato (2019) for starch production, varied with variety as 'Gogeonmi' 3,926 > 'Jinhongmi' 3,428 > 'Daeyumi' 2,873 > 'Singeonmi' 2,752 kg/10a. The starch content was 20.2% in 'Daeyumi', 18.2 in 'Gogeonmi', 21.2 in 'Singeonmi', and 20.6% in 'Jinghongmi'. The total amount of starch was higher in 'Daeyumi' (730 kg/10a) and 'Gogeonmi' (731 kg/lOa). The yield of chips and edible varieties 'Pungwonmi' was 4,688 kg/10a. The yield of 'Shinjami' of purple variety such as beverages and powder was 3,139 kg/10a. Aaa result of evaluation sweetpotato yield by waterlogging treatments on different growing stages in paddy fields, the yields of 'Daeyumi' and 'Jinhongmi' varieties treated with waterlogging at the storage root formation stage decreased by 11.8% and 11.7%, respectively, compared to the control. In the case of waterlogging treatment at storage root swelling stage, Both varieties showed the lowest yield reduction at 7.0% and 4.8%, respectively. Based on these results, stable production and substitution effect of processing raw materials can be expected by cultivating sweetpotato varieties suitable for paddy cultivation.

• 식품산업과 영양
• /
• 제21권2호
• /
• pp.8-14
• /
• 2016

• 한국식품과학회지
• /
• 제32권1호
• /
• pp.69-74
• /
• 2000

14품종 찹쌀을 시료로하여 유과제조에 대한 가공적성을 비교하였다. 유과의 가공성과 상관 관계가 있는 찹쌀의 이화학적 특성으로는 수침에 의해 유리되는 환원당 함량이었으며, 유리되는 환원당 함량의 양이 많은 품종의 찹쌀일수록 유과의 가공성이 좋았다. 14품종의 찹쌀 중 유과의 팽화도, 아삭아삭한 정도, 관능검사에 의한 기호도 등의 수치가 골고루 높아 유과제조에 적합한 품목으로는 CB243, 산동 71 이었다.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2022년도 추계학술대회
• /
• pp.325-325
• /
• 2022

In order to developing high-quality rice varieties and processing varieties, systematic and stable evaluation of physicochemical properties is required for breeding lines. In this study, we compared the quality characteristics evaluation results of rice breeding lines for cooked rice, special rice, and whole crop silage rice adapted to central plain region (Suwon) in order to use as basic data for future rice variety development. Brown rice length/width ratio, head rice ratio, protein content, amylose content, alkali digestion value(ADV) and Toyo value were analyzed to evaluate the quality characteristics of yield trial lines cultivated in Suwon for four years (2017-2020). Brown rice length/width ratio, head rice ratio, protein content, ADV and Toyo values showed significant differences by year, but there was no significant difference in amylose content (p<0.05), which showed little environmental variation. The head rice ratio and Toyo value showed an increasing trend, while the protein content showed a decreasing trend. However, the protein content was the highest in 2020, which is thought to be owing to little sunlight hours due to heavy rainfall in 2020. The protein content of whole crop silage rice was 8.1%, which was significantly higher than that of other lines (p<0.05). Toyo value of medium-maturing and early-maturing lines were 67.6 and 73.7%, respectively, and the Toyo value of medium-maturing lines was higher than that of the early-maturing lines (p<0.05). In correlation analysis among the quality characteristics of the rice lines for cooked rice, significant positive correlations were detected between Toyo value and head rice ratio, amylose content, ADV, and a negative correlation was observed between Toyo value and protein content (p<0.05).

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2006년도 한국약용작물학회 공동춘계학술발표회
• /
• pp.402-403
• /
• 2006