• Journal of Biosystems Engineering
• /
• v.42 no.1
• /
• pp.69-74
• /
• 2017

Purpose: The purpose of this study is to analyze turbidity and quality characteristics of white rice as a function of main shaft blast velocity and to verify the optimum processing conditions in the cutting type white rice processing system (CTWRPS). Methods: Sindongjin, one of the rice varieties, which used to be produced in Gimje-si, Jeollabuk-do, in 2015, was used as the experimental material. Turbidity and quality characteristics of white rice were measured at three different main shaft blast velocities: 25, 30, and 35 m/s. The amount of test material used for a single experiment was 20 kg, and after processing, whiteness was found to be $42.5{\pm}0.5$, following which, turbidity and quality characteristics were measured. Results: Turbidity decreased with increase in the shaft blast velocity, and as a result, was lowest at 35 m/s of shaft blast velocity among all the other experiment velocities. The trend of cracked rice ratios was similar to the turbidity. Broken rice ratio turned out to be less than 2.0% in all the test conditions. In the first stage of processing, the processing pressure decreased as the main shaft blast velocity increased. Additionally, in the second stage of processing, the processing pressure was at its lowest value at the main shaft blast velocity of 35 m/s. Energy consumption, too, decreased as the main shaft blast velocity was increased. Conclusions: From the above results, it is concluded that the main shaft blast velocity of 35 m/s is best for reducing turbidity and producing high quality rice in a CTWRPS.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.38 no.6
• /
• pp.513-523
• /
• 1993

Varietal difference in structural and physical characteristics of rice starch and interrelationships between these starch properties and the physicochemical components of rice grains were investigated for twenty four rice varieties, which were considerably different in amylose content, gelatinization temperature and gel consistency, to obtain the basic informations for diversifying the utility of rice grains and for developing various rice cultivars adaptable to rice food processing. Wave length of maximum absorbance for blue color reaction of starch-I$_2$ complex was 520nm for glutinous rice and 560～600nm for nonglutinous rice. The higher amylose rice showed the longer wave length but there was considerable difference of the wave length among rice materials with similar amylose content. Varietal difference in frequency distribution of debranched starch molecules by isoamylase hydrolysis was largest in amylose fraction, the longest fraction(Fr. I), and was next bigger in intermediate fraction(Int.Fr.) and the ratio between short and long glucose chain of amylopectin fraction(Fr. III /Fr. II). The Fr. III / Fr II ratio was higher in glutinous rice than in nonglutinous one but it was considerably different among nonglutinous rice varieties without any connection with amylose content. The lower alkali digestible rice showed the longer half-hydrolysis time in acid solution. Both soft and hard gel rice varieties in gel consistency test revealed significant varietal difference of 50% acid hydrolysis time. The harder rice in gel consistency exhibited the less frequency of short branch fraction of amylopectin (Fr. III) and the higher amylose content. Twenty four rice varieties were cleary classified by upper two principal components contracted from structural or physical traits of rice starch and some physicochemical properties of rice grain by principal component analysis. The 1st and 2nd principal components can be characterized to components related with amylose and amylopectin structure respectively.

• Korean Journal of Food Science and Technology
• /
• v.45 no.5
• /
• pp.613-618
• /
• 2013

The quality characteristics of brown rice polished with grains of four rice varieties (Hwaseonchal, Baegjinju, Ilpum and Goami) were examined. For the physical properties of native and fried brown rice starches, the gelatinization temperatures and enthalpies (determined with differential scanning calorimetry) of brown rice starches decreased with increasing amylose content. The pasting viscosities of native brown rice starches in distilled water were higher than those in $HgCl_2$ solution (as an ${\alpha}$-amylase inhibitor). The highest viscosity of gelatinized starch was observed for the starch of Ilpum rice variety relative to other varieties. Cystal packing arrangement of brown rice starches subjected to deep-fat frying converted A-type (typically observed for cereal starches) into V-type (formed by retrogradation and recrystllization of amylose molecules).

• Journal of Biosystems Engineering
• /
• v.3 no.1
• /
• pp.47-63
• /
• 1978

This study was conducted to obtain a basic information necessary to assess present rice milling technology in Korea The profiles for milling plants was analyzed by survey work.For the private custom-work mills, which process about 80 percent of domestic rice consumption ,their actual milling test for the identical samples as used for filed mills was conducted. Two rice varieties Japonica and Tongil-type were associated with the experiments. The results are summarized as follows: 1. Analyses for private custom-work mills showed their general aspects as; about 91 percent of the mills belonged to an individual owner ship ; more than 93 percent of the mills was established earlier than 1950 ; about 80 percent of the mills was powered with electric motor; mills having less than two employees were about 75 percent; about 45 percent of the mills provided for warehouse in storing customers cereal grains. 2. The polishers installed in 1,255mills within the surveyed area (7 counties) have been supplied by 44 different domestic manufacturers ;in but about 60 percent of which was supplied by 6major manufacturers. The polishers could be classified into two categories in terms of principles of their polishing actions ;jet-pearler and friction types. About 51 percent of the mills was equipped with the former which has been recognized as giving greater milling recovery than the friction types. 3. Reason for owners of private mills to supplement new machines was due mainly to pgrading their mills to meet the requirements that established by the Government. However, about 60 percent of the mill owners intended to replace with new pearler by their own needs to meet with new high yielding varieties. 4. Processing systems of each previate rice mills surveyed could be classified into three categories, depending upon whether the systems posessed such components as precleaner and paddy separator or not. Only 36.7 percent of mills was installed with both precleanr ad paddy seperrator, 5.0 percent of mills did have neither percleaner nor paddy seperator, and rest of them equipped only one of the two. Hence,it is needed for about 63% of rice miils to be supplemented with these basic facilities to meet with the requirements for the standaized system. 5. Actual milling capacity measured at each field rice mills was shown a wide variation, having range from about 190 to 1,210 kg/hr. The percentages of mills classified according to daily milling capacity based on this hourly capacity were 24.3% for the capacity less than 3 M/T a day; 20.0% for 3-4 M/T; 15.6% for 4-5 M/T; 6.7% for 5-6 M/T; 22.3% for 6-7 M/T; and 11.0% for more than 7 M/T a day. 6. Actual amount of rice processed was about 310 M/T a year in average. About 42% of total milled rice was processed during October to Decembear, which formed a peak demand period for rice mills. The amount of rice milled during January to May was relatively small, but it had still a large amount compared to that during June to September. 7. Utilization rate of milling facility, i. e., percentage of the actual amount of milled rice to the capacity of rice mills, was about 18% on the year round average, about 41% in the peak demand season, and about 10% during June to September. Average number of operating days for mills surveyed was about 250 days a year, and about 21 days a month. 8. Moisture contents of paddy at the time of field mill tests were ranged 14.5% to 19.5% for both Japonica and Tong-i] varieties, majority of paddy grains having moisture level much higher than 1530. To aviod potential reduction of milling recovery while milling and deterioration of milled rice while storage due to these high grain mJisture contents, it may be very important for farmers holding rice to dry by an artificial drying method. 9. Milling recovery of JapJnica varieties in rice mills was 75.0% in average and it was widely ranged from 69.0% to 78.0 % according to mills. Potential increase in milJing recovery of Japonica variety with improvement of mill facilities was estimated to about 1.9%. On the other hand, milling recovery of Tong-il varieties in the field mill tests was 69.8% in average and it ranged from 62% to 77 %, which is much wider than that of Japonica varieties. It is noticed that the average milling recovery of Tong-il variety of 69.8% was much less than that of the Japonica-type. It was estimated th3.t up to about 5.0% of milling recovery for Tong-il variety could be improved by improving the present lo'.ver graded milling technology. 10. Head rice recoveries, as a factor of representing the quality of commercial goods, of Japonica and Tong-il varieties were 65.9% and 53.8% in average, and they were widely ranged from 52% to 73% and from 44% to 65% , respectively. It was assessed that head rice recovery of Japonica varieties can be improved up 3.3% and that of Tong-il varieties by 7.0% by improving mill components and systems.

• Korean Journal of Food Science and Technology
• /
• v.48 no.1
• /
• pp.20-26
• /
• 2016

This study invesigated the physicochemical properties of rice flours from conventional and high-yielding rice varieties in order to enhance usability processing of high-yielding rice varieties. Moisture content was not remarkably different among rice flours by cultivar. The highest content of total free sugars was detected in Hopum rice. Apparent amylose content of Anda was higher than that of other rice varieties. The total amount of amino acids was highest in Anda rice among the rice cultivars. Contents of vitamin $B_1$ in Hanarum were highest among the rice cultivars. Initial pasting temperature was lowest in Anda rice ($60.10^{\circ}C$). Hanarum rice showed the lowest setback values among the rice flours. Therefore, Anda and Hanarum rice cultivars were suggesting the possibility of a processed rice food source.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2022.10a
• /
• pp.48-48
• /
• 2022

In recent, a demand for sweetpotato cultivation technology to expand the cultivated area of field crops in paddy fields is increasing. This research was carried out to establish suitable varieties and cultivation techniques for mass production of sweetpotato for processing raw materials. For the selection of varieties suitable for cultivation in rice fields for each processing purpose, 12 varieties in 2018 (8 varieties for starch, 4 as dried, chips and beverages), and 6 varieties in 2019 (4 varieties for starch including 'Daeyumi'; chips, semi-dried 'Pungwonmi'; beverage and coloring 'Shinjami') were used. Sweetpotato stems were planted in mid-May and harvested after 120 days to investigate the yield. Results revealed that the yield of sweetpotato (2019) for starch production, varied with variety as 'Gogeonmi' 3,926 > 'Jinhongmi' 3,428 > 'Daeyumi' 2,873 > 'Singeonmi' 2,752 kg/10a. The starch content was 20.2% in 'Daeyumi', 18.2 in 'Gogeonmi', 21.2 in 'Singeonmi', and 20.6% in 'Jinghongmi'. The total amount of starch was higher in 'Daeyumi' (730 kg/10a) and 'Gogeonmi' (731 kg/lOa). The yield of chips and edible varieties 'Pungwonmi' was 4,688 kg/10a. The yield of 'Shinjami' of purple variety such as beverages and powder was 3,139 kg/10a. Aaa result of evaluation sweetpotato yield by waterlogging treatments on different growing stages in paddy fields, the yields of 'Daeyumi' and 'Jinhongmi' varieties treated with waterlogging at the storage root formation stage decreased by 11.8% and 11.7%, respectively, compared to the control. In the case of waterlogging treatment at storage root swelling stage, Both varieties showed the lowest yield reduction at 7.0% and 4.8%, respectively. Based on these results, stable production and substitution effect of processing raw materials can be expected by cultivating sweetpotato varieties suitable for paddy cultivation.

• Food Industry And Nutrition
• /
• v.21 no.2
• /
• pp.8-14
• /
• 2016

• Korean Journal of Food Science and Technology
• /
• v.32 no.1
• /
• pp.69-74
• /
• 2000

Varietal difference in physicochemical characteristics of glutinous rice grain and interrelationships between these properties and the quality characteristics of Yukwa(fried rice cookie) were investigated on fourteen rice varieties, to obtained the basic informations for diversifying the utility of glutinous rice grain and for developing various glutinous rice cultivars adaptable to glutinous rice food processing. Among physicochemical properties of glutinous rice grain, the content of released reducing sugar during soaking treatment was the most positive correlation between the adaptability to Yukwa processing quality. CB243 and Sandong 71 were the most adaptable glutinous rice cultivars to make the Yukwa, because of its tested score in expansion volume, crispiness and sensory preference was higher than other glutinous rice cultivars.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2022.10a
• /
• pp.325-325
• /
• 2022

In order to developing high-quality rice varieties and processing varieties, systematic and stable evaluation of physicochemical properties is required for breeding lines. In this study, we compared the quality characteristics evaluation results of rice breeding lines for cooked rice, special rice, and whole crop silage rice adapted to central plain region (Suwon) in order to use as basic data for future rice variety development. Brown rice length/width ratio, head rice ratio, protein content, amylose content, alkali digestion value(ADV) and Toyo value were analyzed to evaluate the quality characteristics of yield trial lines cultivated in Suwon for four years (2017-2020). Brown rice length/width ratio, head rice ratio, protein content, ADV and Toyo values showed significant differences by year, but there was no significant difference in amylose content (p<0.05), which showed little environmental variation. The head rice ratio and Toyo value showed an increasing trend, while the protein content showed a decreasing trend. However, the protein content was the highest in 2020, which is thought to be owing to little sunlight hours due to heavy rainfall in 2020. The protein content of whole crop silage rice was 8.1%, which was significantly higher than that of other lines (p<0.05). Toyo value of medium-maturing and early-maturing lines were 67.6 and 73.7%, respectively, and the Toyo value of medium-maturing lines was higher than that of the early-maturing lines (p<0.05). In correlation analysis among the quality characteristics of the rice lines for cooked rice, significant positive correlations were detected between Toyo value and head rice ratio, amylose content, ADV, and a negative correlation was observed between Toyo value and protein content (p<0.05).

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2006.04a
• /
• pp.402-403
• /
• 2006