• 제목/요약/키워드: processing property

검색결과 1,211건 처리시간 0.025초

Fabrication of multicolor photochromic thin film

  • Kang, Bonghoon
    • Journal of Ceramic Processing Research
    • /
    • 제13권spc2호
    • /
    • pp.373-376
    • /
    • 2012
  • Thin films of Ag-SiO2-TiO2 composite oxides with SiO2/TiO2 of 20/80 molar compositions were prepared by the sol-gel method, using tetraethylorthosilicate (TEOS) and titanium isopropoxide (TIP) as precursors. Ag-SiO2-TiO2 films coated on commercial glass substrates have successfully been synthesized using sol-gel method. The Ag-SiO2-TiO2 film with 0.5% Ag-added concentration and 20 mol% SiO2-mixture gives optimal results on crystalline structure, optical property, surface area, and photochromic property. Absorption near the wavelength of the incident light decreased gradually. The reversibility of the two-photon writing process in Ag-SiO2-TiO2 film is clearly seen.

Luminescence property of Eu2+ in SiO2-Al2O3 glass phosphor

  • Chae, Ki Woong;Lee, Kyoung-Ho;Cheon, Chae Il;Cho, Nam In;Kim, Jeong Seog
    • Journal of Ceramic Processing Research
    • /
    • 제13권spc2호
    • /
    • pp.189-192
    • /
    • 2012
  • Manufacturing process for silicate glass phosphors containing Eu2+ activator and their photoluminescence property have been studied. We adopted powder sintering process instead of traditional glass melting process for making glass phosphor. At first, phosphor powders were synthesized at 1200 ℃ for 2-3 hours under a reducing atmosphere with 10% H2-90% N2 gas mixture. The reduced powders were compacted into discs and then the discs weresintered at 1400 ~ 1500 ℃ for 1 hr under a reducing atmosphere of 5H2-95% N2. The enhancement of PL intensity by Al2O3 addition, XPS binding energy shift of Si 2p and O 1s, sintering shrinkage, and crystallization were characterized.

피라미드 그래프의 헤밀톤 특성 (A Hamiltonian Property of Pyramid Graphs)

  • 장정환
    • 정보처리학회논문지A
    • /
    • 제13A권3호
    • /
    • pp.253-260
    • /
    • 2006
  • 본 논문에서는 피라미드 그래프에서의 헤밀톤 사이클 특성을 분석한다. 사이클 확장 연산을 이용하여 사이클의 크기를 확대시켜 나가는 일련의 과정을 통하여 헤밀톤 사이클을 찾을 수 있는 제시된 알고리즘을 적용함으로써 임의의 높이 N인 피라미드 그래프 내에 길이 $(4^N-1)/3$인 헤밀톤 사이클이 존재함을 증명한다.

최대 평탄특성을 위한 2-D FIR Circular 필터 설계에 관한 연구 (A Study on Design of Maximally Flat 2-D FIR Circular Filter)

  • 서현수;배상범;김남호
    • 융합신호처리학회 학술대회논문집
    • /
    • 한국신호처리시스템학회 2005년도 추계학술대회 논문집
    • /
    • pp.159-162
    • /
    • 2005
  • Recently, due to rapid developments of wireless communication and digital TV, modern society needs to process of aquisition, storage and transmission of much information. So the importance of signal processing is increasing and various digital filters are used in the two-dimensional signal such as image. And kinds of these digital filters are IIR(infinite impulse response) filter and FIR(finite impulse response) filter. And FIR filter which has the phase linearity, the easiness of creation and stability is applied to many fields. In design of this FIR filter, flatness property is a important factor in pass-band and stop-band. In this paper, we designed a 2-D Circular FIR filter using the Bernstein polynomial, it is presented flatness property in pass-band and stop-band. And we simulated the designed filter with noisy test image and compared the results with existing methods.

  • PDF

히스테리시스 특성이 계열연상에 미치는 영향에 대한 통계 신경역학적 해석 (Analysis of Statistical Neurodynamics for the Effests of the Hysteretic Property on the Performance of Sequential Associative Neural Nets)

  • 김응수;오춘석
    • 한국정보처리학회논문지
    • /
    • 제4권4호
    • /
    • pp.1035-1045
    • /
    • 1997
  • 신경회로망의 동작과 정보처리 능력 등에 관하여 살펴보고자 할 때, 신경회로망의 구성 요소를 어떻게 모델화 할 것인가를 중요한 문제이다. 소자의 응답특성이 바뀜에 따른 특성의 변화, 결합강도 및 적용규칙이 바뀜 으로써 회로망 전체의 다이나믹스가 바 뀌는 모습, 소자 상호간의 결합 형태에 따른 정보처리 능력의 변화등과 같은 신경회로 망이 가진 다양한 정보처리 능력을 밝히는 것은 병렬 정보처리의 메카니즘을 이해하는 문제와도 일맥 상통하고 있다. 따라서 이러한 문제에 대하여 신경회로망의 정보처리 능력을 해석 적으로 평가하는 것은 병렬분산 정보처리의 본질을 밝힌다는 측면과 지적 정보처리 시스템의 구측을 목표로 연구되고 있는 신경회로망의 본질을 이해한다는 측면에서도 중요하게 여겨진다. 따라서 본 논문에서는 신경회로망을 구성하는 구성요 소의 변화, 그 가운데에서도 특히 소자의 히스테리시스 특성이 신경망의 계열연상 능력에 따라 미치는 영향에 대한 이론적 해석결과에 대하여 기술한다.

  • PDF

에폭시 몰드형 PT의 절연특성 개선 (Improvement on Property of Insulation in PT of Epoxy Mold Type)

  • 송재주;김성홍;최명호;이재;임성훈;한병성
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2001년도 기술교육위원회 창립총회 및 학술대회 의료기기전시회
    • /
    • pp.67-71
    • /
    • 2001
  • PT of epoxy mold type have tendency to occur dielectric breakdown in high voltage system. These are using for measurement of voltage or protection of system and application voltage is 25.8kV. Therefore, for improving a lots of problems like as partial discharge, we had analyze on the destroyed Epoxy molded type PT and processing of production. As a results, we concluded that the reason of dielectric breakdown was defect of processing and degradation of insulation by electrical stress. In this work, We presented a method of solution in processing of production. which is reduction of the PO which was occurred at the insulation material. so we must many try to remove faults, these problems are mainly to winding methods of 1st coil. the other side, Reformation of 1st coil improved property of PD and we could prove it with experiments.

  • PDF

옻의 주치(主治).효능(效能).수치법(修治法)에 관(關) 소고(小考);11종 한약서를 중심으로 (On Estimation of Indication, Property and Processing of Rhus Verniciflua Stokes)

  • 엄석기;김경석
    • 대한한의학원전학회지
    • /
    • 제21권2호
    • /
    • pp.29-37
    • /
    • 2008
  • Based on 11 Classics of Materia Medica designated by Ministry of health and welfare bulletin 1995-15 as legal basis in scope and preparation of herbal prescription, we reviewed indication, property and processing of Rhus Verniciflua Stokes which appear extensively in literature since earlier Joseon Dynasty. Following is the conclusion of this review after comparing with 'Korean Pharmacopoeia: commentary on herbal product standard'. 1. The properties of Rhus Verniciflua Stokes in 'Korean Pharmacopoeia :commentary on herbal product standard' should be changed as 'Tonifying the middle, restoring the muscle, fulfilling marrow, breaking old static blood, tonifying and activating after removing mass, unblocking the meridian, killing worms' and indication should be changed as 'Old static blood, deep rooted mass, wind-cold-dampness arthralgia, cough, 9 types of chest pain, abdominal or flank accumulation of stagnated qi[氣], amenorrhea, hernia mass, small bowel or bladder colic pain, abdominal pain due to worm accumulation'. 2. The processing of Rhus Verniciflua Stokes in 'Korean Pharmacopoeia: commentary on herbal product standard' should include 'natural drying or steaming drying followed by grinding and stir-baking until ripened or smoking appears'.

  • PDF

계열연상능력에 미치는 히스테리시스 특성에 대한 해석 (Analysis of the effects of the hysteretic property on the performance of sequential associative neural nets)

  • 김응수;이상욱
    • 한국정보통신학회논문지
    • /
    • 제16권3호
    • /
    • pp.448-459
    • /
    • 2012
  • 신경회로망의 동작과 정보처리 능력 등에 관하여 살펴보고자 할 때, 신경회로망의 구성 요소를 어떻게 모델화 할 것인가는 중요한 문제이다. 소자의 응답특성이 바뀜에 따른 특성의 변화, 결합강도 및 적응규칙이 바뀜으로써 회로망 전체의 다이나믹스가 바뀌는 모습, 소자 상호간의 결합 형태에 따른 정보처리 능력의 변화 등과 같은 신경회로망이 가진 다양한 정보처리 능력을 밝히는 것은 병렬 정보처리의 메카니즘을 이해하는 문제와도 일맥상통하고 있다. 따라서 이러한 문제들에 대하여 신경회로망의 정보처리 능력을 해석적으로 평가하는 것은 병렬분산 정보처리의 본질을 밝힌다는 측면에서 중요하게 여겨진다. 따라서 본 논문에서는 신경회로망을 구성하는 구성요소의 변화, 그 가운데에서도 특히 소자의 히스테리시스 특성이 신경망의 계열연상능력에 미치는 영향에 대한 이론적 해석결과에 대하여 기술한다.

가돌리늄 첨가에 따른 2205 듀플렉스 스테인레스 강의 기계적 및 부식 특성 변화 (Influence of Gadolinium Addition on Mechanical and Corrosion Properties of 2205 Duplex Stainless Steel)

  • 임재한;안지호;문병문;김영직
    • 한국주조공학회지
    • /
    • 제35권6호
    • /
    • pp.163-169
    • /
    • 2015
  • This study reports the influence of gadolinium (Gd) addition on mechanical and corrosion properties of 2205 duplex stainless steel. In all alloys produced, regardless of the initial Gd content, Gd-based inclusions were well distributed in the duplex stainless steel matrix. As the Gd content increased from 0 wt% to 0.19 wt%, the ultimate tensile strength and hardness of the alloy increased from 630 MPa to 977 MPa and from 57 to 61, respectively, while elastic modulus, tensile elongation and impact energy of the alloy decreased. The critical crevice temperatures of Alloy1, Alloy2 and Alloy3 were $20^{\circ}C$, $20^{\circ}C$ and $15^{\circ}C$, respectively.