• Journal of Ginseng Research
• /
• v.42 no.3
• /
• pp.327-333
• /
• 2018

Background: Bioactive compounds in plant extracts are able to reduce metal ions to nanoparticles through the process of green synthesis. Panax ginseng is an oriental medicinal herb and an adaptogen which has been historically used to cure various diseases. In addition, the P. ginseng leaves-mediated gold nanoparticles are the value-added novel materials. Its potential as a cosmetic ingredient is still unexplored. The aim of this study was to evaluate the antioxidant, moisture retention and whitening properties of gold nanoparticles (PgAuNPs) in cosmetic applications. Methods: Cell-free experiments were performed to evaluate PgAuNP's antioxidant and moisture retention properties and inhibition activity on mushroom tyrosinase. Furthermore, in vitro cell cytotoxicity was evaluated using normal human dermal fibroblast and murine B16BL6 melanoma cells (B16) after treatment with increasing concentrations of PgAuNPs for 24 h, 48 h, and 72 h. Finally, in vitro cell assays on B16 cells were performed to evaluate the whitening effect of PgAuNPs through reduction of cellular melanin content and tyrosinase activity. Results: In vitro DPPH radical scavenging assay results revealed that PgAuNPs exhibited antioxidant activity in a dose-dependent manner. PgAuNPs exhibited moisture retention capacity and effectively inhibited mushroom tyrosinase. In addition, 3-(4,5-dimethyl-thiazol-2yl)-2,5-diphenyl tetrazolium bromide results revealed that PgAuNPs were not toxic to human dermal fibroblast and B16 cells; in addition, they significantly reduced melanin content, tyrosinase activity, and mRNA expression of melanogenesis-associated transcription factor and tyrosinase in B16 cells. Conclusion: Our study is the first report to provide evidence supporting that P. ginseng leaves-capped gold nanoparticles could be used as multifunctional ingredients in cosmetics.

• Proceedings of the Botanical Society of Korea Conference
• /
• 1987.07a
• /
• pp.133-148
• /
• 1987

Gibberellin(GA) 3-$\beta$ hydroxylation is very important for the shoot elogation in the higher plants, since only 3$\beta$-hydryoxylated GAs promote shoot elogation in several plants. Fluctuation of 3$\beta$-hydryoxylase activity was examined during seed maturation using two cultivars of , P. vulgaris, Kentucky Wonder (normal) and Masterpiece (dwarf). Very immature seeds of both cultivars contain high level of 3$\beta$-hydroxylase activity (per mg protein). Both cultivars showed maximum of enzyme activity (per seed) in the middle of their maturation process. Gibberellin 3$\beta$-hydroxylase catalyzing the hydroxylation of GA20 to GA1 was purified 313-fold from very early immature seeds of P. vulgaris. Crude soluble enzyme extracts were purified by 15% methanol precipitation, hydrophobic interaction chromatogrphy, DEAE ion exchange column chromatography and gel filtration HPLC. The 3$\beta$-hydroxylase activity was unstable and lost much of its activity duting the purification. The molecular weight of purified enzyme was extimated to be 42, 000 by gel filtration HPLC and SDS-PAGE. The enzyme exhibited maximum activity at pH 7.7. The Km values for [2.3-3H] GA20 and [2.3-3H]GA9 were 0.29 $\mu$M and 0.33 $\mu$M, respectively. The enzyme requires 2-oxoglutarate as a cosubstrate; the Km value for 2-oxoglutarate was 250 $\mu$M using 3H GA20 as a substrate. Fe2+ and ascorbate significantly activated the enzyme at all purification steps, while catalase and BSA activated the purified enzyme only. The enzyme was inhibited by divalent cations Mn2+, Co2+, Ni2+, Cu2+, Zn2+, Cd2+ and Hg2+. Effects of several GAs and GA anaogues on the putrified 3$\beta$-hydroxylase were examined using [3H]GA9 and GA20 as a substrates. Among them, GA5, GA9, GA15, GA20 and GA44 inhibited the enzyme activity. [13C, 3H] GA20 was converted by the partially purified enzyme preparation to [13C, 3H]GA1, GA5 and GA6, which were identified by GC-MS, GA9 was converted only GA4, GA15 and GA44 were converted to GA37 and GA38, respectively. GA5 was epoxidized to GA6 by the preparation. This suggests that 3$\beta$-hydroxylation of GA20 and epoxidation of GA5 are catalyzed by the same enzyme in P, vulgaris.

• Journal of the East Asian Society of Dietary Life
• /
• v.17 no.2
• /
• pp.205-212
• /
• 2007

This study was designed to investigate a natural medicinal multi-plants extract (BG515), which consisted of multi extracts of Mori folium, Rehmannia glutinosa Liboschitz, Dioscorea japonica, Lycii fructus, and Astragalus radix, on blood glucose, insulin levels, and serum malondialdehyde (MDA) concentrations in streptozotocin-induced diabetic rats. Streptozotocin (STZ) induces a type 1 diabetes mellitus in rats. Type 1 is usually characterized by the presence of islet cell autoantibodies (ICA), autoantibodies to insulin (IAA), and autoantiboides to glutamic acid decarboxylase (GAD), which identify the autoimmune process that leads to $\beta-cell$ destruction. Thirty-five male Sprague-Dawley (SD) rats weighing $150\sim170g$ each (6 weeks old) were randomly divided into one control (Group A) and 4 STZ-induced diabetic groups, and were subjected to one of the following treatment for 12 weeks. Groups A and B were fed basal diets and Group C, D, and E received the same diets as groups A and B, but with supplements of 150 mg/kg, 300 mg/kg, and 600 mg/kg of BG515 orally for 12 weeks, respectively. Diabetes was induced in Groups B, C, D, and E by intravenous injection of 45 mg/kg of STZ per body weight in sodium citrate buffer (pH 4.5) via the tail vein. In the BG515 groups, we found increases in serum insulin levels, compared to the STZ-control group, but these data were not significant. In contrast, blood glucose and serum MDA concentrations decreased in the BG515 groups compare to the STZ-control group. At the 5th week, in all the BG515 administered groups, there were decreases in serum blood glucose levels compared to the STZ- control group, and this activity was very strong in the BG515-1 group at the 12th week. These results suggest that natural bio-complex compounds (BG515) may slightly suppress STZ-induced changes in serum MDA concentration via the maintenance of serum insulin levels, due to the prevention of $\beta-cell$ and glucagon destruction by STZ.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.22 no.6
• /
• pp.305-311
• /
• 2012

In order to recycle the coal bottom ashes (denoted as BA) produced from a thermal power plant, the artificial aggregates (denoted as AAs) containing BA and red clay were manufactured, and the physical properties of AAs were studied as a function of particle size of BA and batch compositions. As-received BA had 38 wt% coarse particles of above 2 mm and many unburned carbon mass and porous slag particles were co-existed. So the two particle sizes of BA, the fine (< 100 ${\mu}m$) and coarse (< 2 mm), were prepared by milling and screening process. The AAs containing fine BA sintered at $1100{\sim}1200^{\circ}C$ had the higher bulk density and lower water absorption compared to the specimen made of coarse BA. The inside core of AAs manufactured by using coarse BA showed nonuniform and porous microstructure, while the AAs made of fine BA had a uniform and dense microstructure. In this research, the AAs containing BA and red clay with various bulk density (1.2~1.7) and water absorption (13~21 %) could be manufactured by controlling the particle size of BA and batch compositions, so the AAs of various physical properties could be applied to the wide fields such as construction/building materials in near future.

• Clean Technology
• /
• v.24 no.1
• /
• pp.27-34
• /
• 2018

Catalytic filter has many advantages for the industrial application owing to its bi-functional ability to treat nitrogen oxides and particulate simultaneously. The technical feasibility of using the catalytic filter in the flue gas treatment process will be more promoted if the high porous ceramic sheet filter is utilized. However, it is not easy to prepare the effective catalytic filter using sheet filter as it has less room for catalyst support due to its thin layer. In this study, catalytic filter using a domestic ceramic sheet filter element has been prepared and conducted the experimental evaluation for NO reduction performance. The current sheet filter element shows the low catalytic activity less than 92% conversion for NO concentration 700 ppm at the face velocity $0.02m\;s^{-1}$. This unexpected low catalytic activity seems to be caused by the present of extraordinary large pores from the lack of uniformity in the pore size distribution of the sheet filter. The large pore size of the sheet filter is reduced by composing the smaller powder as its raw material, which presents improvement in NO conversion more than 96%. More improvement is observed showing 98% NO conversion which is applicable to a commercial plant when the catalyst coating layer is expanded by adding the large $TiO_2$ particles during the catalyst preparation. Both of above two methods is regarded as that the broad gates of the larger pores in the coating layer are effectively filled with the proper catalyst. So these results encourage the utilization of sheet filter as a good catalytic filter material with its potential merit of high permeability.

• Journal of Ginseng Research
• /
• v.27 no.2
• /
• pp.86-91
• /
• 2003

To develop a new ginseng variety with good quality and high yielding, a lot of individual ginseng plant were selected in the farmers'fields in 1968. Among them, a promising line,680-83-4, has been developed through comparative cultivation of several lines selected with pure line separation from local races in KT&C Central Research Institute, preliminary and advanced yield trials were performed fir 8 years.680-83-4 was designated as KG103, which was then registered as a new variety “Gopoong” with the regional yield and adaptation trials for 10 years (1981-1990) on December 27,2000 in Korea. Gopoong has different phenotype of a dark violet stem and dark red fruit and inverted triangle shape of berries cluster as compared with other varieties. Taproot of Gopoong was longer than local race Jakyungjong, and root yield was 4.5% higher than local race Jakyungjong. In red ginseng quality, the rates of Chun-Jeesam grade(Chun and Jee means 1 st and 2nd grade, respectively) were 16.6% and 9.4% for Gopoong and Jakyungjong, respectively. In these results, it was that Gopoong was superior ginseng line with good quality far manufacture of red ginseng.

• Journal of Sasang Constitutional Medicine
• /
• v.10 no.2
• /
• pp.163-180
• /
• 1998

In 1492 year, the corn originated in America continent had spread all over the world after spreading into Europe by Columbus. Since the Corn had a similar shape with adlai's one (Yulmoo(율무)), it had been written by the different name of adlai (Yulmoo) at the "訓蒙字會(Hun-mong-ja-hoe)(1527)". Therefore we should consider "Hun-mong-ja-hoe" is the first record of the corn and it is a significant historic record in the civilization exchange between the Orient and the Occident that this record has the only difference of around 30 years later after the spreading corn to Europe. However, this is on the assumption that it is correct for a scholar of Korean literature to persist in that '叡山本' of "Hun-mong-ja-hoe" could be considered as the first edition. The corn had been once classified as a same kind of the Chinese millet because the people had been recognized the corn as a similar group of the Chinese millet and the Indian millet. The Chinese millet contains a summer vigor and becomes as an ingredient of alcoholic drink. And we can find out that $C_4$ type plant (such as corn, Chinese millet, Indian millet, foxtail millet) mostly have a tendency to belong to the food for "Taeumin(太陰人)", because of its high energy efficiency, a flourishing absorption of fertilizing and a strong emission power. The fried corn with a strong summer vigor and a raised feature has a good effect to the treatment of the teethridge disease. And the tea of corn with an warm feature, thanks to its functions of making the stomach and intestines comfortably as well as urination, is a proper food for the 'Taeumin" who is apt to overeat themselves.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.13 no.2
• /
• pp.101-108
• /
• 2011

Climate change could have a pronounced impact on natural and agricultural ecosystems. To assess the impact of climate change, projected climate data have been used as inputs to models. Because such studies are conducted occasionally, it would be useful to employ Cloud computing, which provides multiple instances of operating systems in a virtual environment to do processing on demand without building or maintaining physical computing resources. Furthermore, it would be advantageous to use open source geospatial applications in order to avoid the limitations of proprietary software when Cloud computing is used. As a pilot study, Amazon Web Service ? Elastic Compute Cloud (EC2) was used to calculate the number of days with rain in a given month. Daily sets of climate projection data, which were about 70 gigabytes in total, were processed using virtual machines with a customized database transaction application. The application was linked against open source libraries for the climate data and database access. In this approach, it took about 32 hours to process 17 billion rows of record in order to calculate the rain day on a global scale over the next 100 years using ten clients and one server instances. Here I demonstrate that Cloud computing could provide the high level of performance for impact assessment studies of climate change that require considerable amount of data.

• Journal of Navigation and Port Research
• /
• v.39 no.4
• /
• pp.353-360
• /
• 2015

The offshore oil production requires a huge amount of cost and time accompanied by multiple variables due to the peculiar nature of 'offshore'. And every process concerned is controlled by elaborate series of plans for reducing loss of lives, environment and property. This paper treats an optimization problem for offshore oil production and transportation. We present an offshore production and transportation network to define scope of the problem and construct a mixed integer linear programming model to tackle it. To demonstrate the validity of the optimization model presented, some computational experiments based on hypothetical offshore oil fields and demand markets are carried out by using MS Office Excel solver. The downstream of the offshore production and transportation network ends up with the maritime transportation problem distributing the crude oil produced from offshore fields to demand markets. We used MoDiSS(Model-based DSS in Ship Scheduling) which was built to resolve this maritime transportation problem. The paper concludes with the remark that the results of the study might be meaningfully applicable to the real world problems of offshore oil production and transportation.

• Resources Recycling
• /
• v.19 no.1
• /
• pp.33-39
• /
• 2010

The spheric sintered body with $6{\pm}2mm$ diameter was manufactured in a rotary kiln at $1125^{\circ}C$/15 min using green body formed by pelletizing the batch powder composing of coal bottom ash produced from power plant and dredged soil by 70:30, wt%. And the physical properties of sintered body (BD) were analyzed to confirm the possibility for applying to an absorbent to restore a contaminated soil. The sintered body had a giant pore above 100 ${\mu}m$ and a fine pore below 10 ${\mu}m$, and bulk density was 1.4. Also its specific surface area, porosity and void proportion were $12.0m^2/g$, 30.1% and 38.2% respectively. The crushed body (BD-C), produced by crushing a BD specimen into an irregular shape with a aspect ratio of about 2, was similar to BD specimen at bulk density and pore size distribution. But it had superior values of specific surface area, porosity and void proportion compared with BD specimen owing to a decreased apparent volume due to conversion of closed pore existed at interior of BD to open pore during a crushing process. The IEP of sintered body occurred at about pH=5, so the optimum pH condition of reacting aqueous solution could be known before bonding a microbe to the sintered body. Hence, the optimum void proportion and porosity of an absorbent can be obtained by appropriate mixing a BD with BD-C from the base data calculated in this study.