• 대한인간공학회지
• /
• 제35권3호
• /
• pp.155-163
• /
• 2016

Objective: This study aims to draw the characteristics of occupational accidents occurred in cabling work, and assess accident severity based on occupational injury data. Background: Accident factors and accident risk are different by the place of work in cabling work. Field managers require information on accident prevention that can be easily understood by workers. However, there has been a lack of studies that focus on cabling work in Korea. Method: This study classifies 450 injured persons caused in cabling work by process, and analyzes the characteristics of occupational injuries from the aspects of age, work experience and accident type. This study also analyzes accident frequency and severity of injury. Results: Results show that preparing/finishing (33.3%) was the most common type of cabling process in injuries, followed by maintenance (28.4%), routing/income (23.1%) and wiring/installation (15.1%) process. The critical incidents in the level of risk management were falls from height in the routing/incoming process, and falls from height in the maintenance process. And, incidents ranked as 'High' level of risk management were slips and trips, fall from height and vehicle incident in the preparing/finishing process, and fall from height in the wiring/installation process. Conclusion and Application: The relative frequency of accident and its severity by working process serve as important information for accident prevention, and are critical for determining priorities in preventive measures.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.464-467
• /
• 2005

Among several polishing techniques for micro structures, polishing process using magnetorheological(MR) fluid has advantages in the finishing process of 3-D micro structures because abrasives in the fluid can reach surfaces with complex feature and play their role. Although many researchers have been trying to reveal its polishing mechanism of the MR polishing, it has not been successful because in-situ measurement of state variables is difficult and process parameters are complex. In fact, one of the key factors for applying process control methodologies, such as Run-to-Run control, is the measuring and monitoring of slurry quality because the process strongly depends on the fluid property. Therefore, it is necessary to maintain consistent slurry quality to guarantee the process repeatability. The proposed equipment achieves the longer life cycle of MR fluid and reduces the variability of products. A new method to measure the material removal rate in MRF polishing process is also proposed and discussed.

• 한국의류학회지
• /
• 제20권5호
• /
• pp.792-800
• /
• 1996

The shape retention finishing provides a fabric for easiness of no-ironing after laundering. In spite of the obvious importance of the new finishing treatment, few systematic studies have been performed on the handle of the fabrics finished by the durable press process. The purpose of this research is to investigate the relationships among the mechanical properties, durable press conditions, primary hand values and the total hand value of the fabrics finished by shape retention process. In this experiment, durable press grade of unfinished fabrics decreased below 2.5, but those of finished fabrics maintained above 4, but the mechanical properties of finished fabrics did not change significantly after laundering. In finished fabrics, D.P. value were correlated with mechanical properties, but had little effects with H.V. and T.H.V. Since the evaluation of the effect of durable press process was done with the naked eyes and standard sample, we could not know exactly change o( mechanical properties, but trace the change of mechanical properties which gave influences on the durable press effects by using KES-FB System.

• 한국정밀공학회지
• /
• 제23권1호
• /
• pp.97-104
• /
• 2006

ELID(Electrolytic In-process Dressing) grinding is an excellent technique for mirror grinding of various advanced metallic or nonmetallic materials. A polishing process is also required for elimination of scratches present on ELID grinded surfaces. MAP(Magnetic Assisted Polishing) has been used as polishing method due to its high polishing efficiency and to its resulting in a superior surface quality. This study is describing an effective fabrication method combining ELID and MAP of nano-precision mirror grinding for glass-lens molding mould. It also presents some techniques for achieving the nanometer roughness of the hard metals, such as WC-Co, which are extensively used in precision tooling material.

• 한국염색가공학회지
• /
• 제5권1호
• /
• pp.33-39
• /
• 1993

This study was to examine the anti-bacteria effect of chrome-tanned garment leathers by various processes to article from hide. Anti-bacterial test by halo test and shake flask method, and pH value measurment are carried out in this study. The results can be obtained as follows: 1. In the soaking process of chrome-tanned garment leathers, it needs more effective anti-bacterial treatment. 2. pH value of samples by various processes has affected to anti-bacteria effect. 3. Chrome used by the tanning and the neutralization process have been found to be the anti-bacteria activity. 4. The dyeing, the fatliquoring and the finishing process has required anti bacteria treatment.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2011년도 춘계학술대회 논문집
• /
• pp.215-216
• /
• 2011

• Composites Research
• /
• 제30권6호
• /
• pp.416-421
• /
• 2017

CFRP와 금속간의 접합공정이 개선된 구조용 접착제가 제조되었다. 구조용 접착제에 대한 경화시간, 기지재료의 표면상태 그리고 접착제의 양에 따른 최적의 접합공정 조건을 랩쉐어 실험을 통하여 파악하였다. 적합한 접합조건을 확인하기 위해 이종재료간의 접합 파단면 상태를 반사현미경을 이용하여 평가하였다. 이종재료간 접합력 향상을 위해 접착제의 개선뿐만 아니라 CFRP의 표면처리 또한 중요하였다. 구조용 접착제의 경우 180도 조건에 20분의 경화온도 조건이 최적이였으며, CFRP의 표면 처리에 따라 접합특성이 향상됨을 확인하였다. 이종재료 간 접합을 위해 구조용 접착제의 양은 $1.5{\times}10^{-3}g/mm^2$ 조건일 때 최적이었다. 접합공정의 개선 및 최적화를 통해 기존의 접착력 대비 10% 이상의 물성 강화를 나타냄을 확인하였다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제28권1호
• /
• pp.32-38
• /
• 2024

공동주택의 경우 사람의 실거주 및 코어시험 시 일어나는 분진 및 소음 등으로 인하여 비파괴검사를 진행하기 어려워 공용부 및 지하 주차장에서 매번 점검이 이루어지며, 저가 수주로 인한 콘크리트 면의 실험이 아닌 마감재 위에서 실험을 진행하여 부실점검이 발생할 수 밖에 없는 실정이다. 또한 강도 추정을 위한 제안식들은 시험조건과 환경의 차이에 따라 변동폭이 크고, 동일한 측정값을 나타내더라도 제안식 마다 그 편차가 커 정확한 강도 추정이 어려워 사용에 어려움을 겪고 있는 실정이다. 이에 공동주택에 주로 사용되는 마감재를 선정하여 마감재를 제거하지 않고 직접 마감재에 비파괴검사법을 활용하여 마감재 종류에 따른 콘크리트 압축강도 비교 평가를 하고자 한다. 마감재 종류에 따른 초음파속도법을 이용한 콘크리트 추정압축강도 신뢰도 평과 결과는 다음과 같다. 초음파속도법을 통해 도출된 추정압축강도와 압축강도의 오차율은 21.83% ~58.89%로 광범위한 변동폭을 보이며. 추정압축강도에 대한 마감재 유무의 영향은 미비한 것으로 나타났다. 이에 마감재 종류를 더 선정하여 마감재 유무에 따른 초음파속도법 연구가 필요하며 신뢰도를 높일 수 있는 추정기법 연구가 필요하다.

• 대한치과교정학회지
• /
• 제29권6호
• /
• pp.637-648
• /
• 1999

교정 치료 후 이상적인 교합과 양호한 심미적 결과를 얻기 위해서 일반적으로 교정 장치 제거하기 4개월에서 7개월 전에 detailing을 시행한다. 이와 같은 과정을 finishing이라고 하며, 이 과정은 최종적인 양호한 결과를 얻는데 있어서 필수적이다. 일부 교정의는 finishing을 위한 특별한 이론적 근거 및 기준 없이 이 과정을 교정 치료의 마지막 단계에서 시행하면 되는 것으로 여기고 있다. 그러나, 최종적인 양호한 교정 치료 결과를 얻기 위해서는finishing 과정이 총 치료 계획의 부분으로 치료의 초기 단계에서부터 고려되어야만 하며, 교정 장치 제거를 위한 이론적 근거 및 기준에 근거한 finishing을 위한 checklist가 필요하다. 이 checklist는 크게 네 부류로 분류할 수 있다. 즉, 교합 요인, 심미적 요인, 치주적 요인과 습관적 요인으로 분류할 수 있다. 교합 요인에서 점검해야할 요소로는 alignment, marginal ridge discrepancy, interproximal contact, anterior inclination, posterior inclination, overjet, overbite, arch form과 functional occlusion 등이 있다. 심미적 요인에는 gingival form, crown form, crown width과 crown length 등이 있다. 치주적 요인에는 root angulation, bone level 등이 있다. 습관적 요인에는 mouth breathing, tongue position at rest, tongue thrust habit, lip biting, nail biting과 finger sucking 등이 있다.

• 한국염색가공학회지
• /
• 제28권2호
• /
• pp.77-91
• /
• 2016

Recently, the spun blend yarns with staple fibers and filaments are being developed in the spinning process using an air blowing and electrostatic spinning technology(cyclone) in order to enhance the soft feeling and the fine count spun blend yarn manufacturing competitiveness. In this study, the appropriate separation condition of polyester multifilament was examined according to the treatment condition of conductive agents and voltage on polyester multifilament in the newly developed cyclone spinning process. And it was investigated the physical properties and dyeability of the cyclone wool/polyester spun blend yarns and its wool composite fabrics in comparison with existing sirofil wool/polyester spun blend yarn and its fabrics. As the result, it is determined that the newly developed cyclone wool/polyester spun blend yarn applied fabrics has a superior quality level in terms of practicality.