• 벤처창업연구
• /
• 제19권1호
• /
• pp.75-91
• /
• 2024

본 연구는 최근 전쟁과 기후변화, 지정학적 불안이 고조되는 가운데 기술혁신의 가속화 등으로 글로벌 경영환경의 급변하고 있다. 이에 따라 산업생태계의 변동성, 복잡성, 모호성, 불확실성이 지속적 확장으로 미래에 대한 예측이나 계획이 어려워지고 있다. 이에 따라 조직은 생존전략에 의해 한계사업정리, 해고 등 불가피한 구조조정을 진행하고 있다. 이에 따라 직장인들은 의도치 않게 직장을 잃을 수 있다는 불안요인이 높아지는 가운데 지속적 경제활동을 위한 대안으로 창업을 모색하고 있다. 창업으로 전환하는 과정에서 직장인의 자기결정성이 어떠한 경로를 통해 영향을 미치는지 검증하고자 하였다. 본 연구를 위해 온라인 설문조사로 310명의 유효 data를 기반으로 SPSS와 AMOS 통계패키지를 활용하였다. 결과를 요약하면, 첫째, 직장인의 자기결정성은 창업의지에 유의한 영향을 미치지 못했다. 다만 자기결성성이 혁신성과 창업지원정책인식에 정(+)의 영향관계를 확인하였다. 이 결과는 창업에 바로 도전하기보다는 장기적인 인생경로 관점에서 혁신적인 경험을 축적하고 창업지원정책인식도를 높여서 단계적으로 준비하려는 심리가 작동된 것을 판단된다. 둘째, 혁신성이 창업의지에 정(+)의 영향을 확인하였다. 또한 창업지원정책인식이 창업의지에 정(+)의 영향을 확인하였다. 이는 정부의 다양한 창업지원정책인식은 창업을 고려할 때 체감도가 높다는 인식이 반영된 것으로 판단된다. 셋째, 혁신성이 창업지원정책인식에 정(+)의 영향을 확인하였다. 이는 예비창업자들이 혁신성을 발현하여 새로운 아이디어의 실현을 위해서는 창업지원정책인식의 실효성이 반영된 것으로 판단된다. 넷째, 혁신성과 창업지원정책인식은 자기결성정과 창업의지 간의 관계를 매개하였고, 창업지원정책인식은 혁신성과 창업의지 간의 관계를 매개하는 것을 확인하여 창업의지에 중요한 요소임을 확인하였다. 창업관련 선행연구에서 학생들을 대상으로 주류를 이루고 있지만, 경제활동의 비중이 높은 직장인을 대상으로 한 연구대상의 차별성과 연구범위 확대 측면에서 학문적 가치가 있고, 자기결정정성의 동기만으로는 창업의지를 자극되지 않는다는 점과 혁신성과 창업지원정책의 완전매개효과 측면을 고려할 때 정부의 인적, 물적 지원정책 등의 실무적 측면에서 시사하는 바가 크다. 본 연구에서 표본의 선정 및 분석과정에서 동일방법편의 문제가 완전히 해소되지 않은 한계성과 창업의지가 형성되어 창업행동으로 전환되는지에 대한 추가적인 확정연구의 필요성이 있다. 선행연구에서 다소 부족했던 인간심리 동기와 창업 간의 관련성을 다룬 학문적 및 실무적 측면에서 직장인의 창업 전환은 개인의 경제적 안정과 국가적으로 일자리 창출의 기대효과가 예상되며 지속적인 연구의 필요성과 가치성이 있다고 판단된다.

• 대한방사선치료학회지
• /
• 제30권1_2호
• /
• pp.191-199
• /
• 2018

목 적 : 본 연구는 colloid gel(slime)을 자체 제작하여, 방사선치료에서 불규칙한 환자 체표면에 대한 보상체로 적용하기 위하여 유용성을 평가하고자 한다. 대상 및 방법 : 본 연구를 위하여 치료에 적합한 colloid gel을 자체적으로 제작하였고, 방사선 치료 적용 가능성 평가를 위해 네 가지 실험을 하였다. 치료 장비 및 CT 장비로는 Trilogy(Varian)와 CT(SOMATOM, Siemens)를 이용하였다. 첫 번째로 colloid gel의 조성에 따른 균질도를 EBT3 Film(RIT)을 이용하여 측정하였다. 두 번째는 colloid gel의 Hounsfield Unit(HU)값을 CRIS phantom과 Eclipse RTP(Eclipse 13.1, Varian) 및 CT 촬영을 이용하여 선량 측정 및 확인을 하였다. 세 번째로 colloid gel의 치료 기간 내 변형 및 변질을 검사하기 위하여 ion chamber(PTW-30013, PTW)를 이용하여 매일 3회씩, 2주간 측정하였다. 네 번째 실험은 자체 제작한 아크릴 팬텀을 이용하여 실제 치료와 유사한 환경에서 bolus, rice, colloid gel을 이용한 치료계획 및 측정된 선량 분포 비교하였고, 추가적으로 dose profile도 확인하였다. 결 과 : 첫 번째 실험에서 조성된 colloid gel case 1, 2, 3의 밀도는 각각 평균 $1.02g/cm^3$, $0.99g/cm^3$, $0.96g/cm^3$이었으며, 6 MV 및 9 MeV에서 측정된 균질도를 판단하였을 때 case 1이 표준편차 1.55, 1.98로 다른 case들에 비해 더 균질한 것으로 확인되었다. 두 번째 실험에서는 HU값은 case 1, 2, 3 평균 15 HU로 확인되었으며, 치료계획과 측정된 선량을 비교하였을 때 9, 12 MeV 모든 측정 위치에서 1 % 이내 차이를 보였으며, 6 MV는 두 측정 위치에서 -1.53 %, -1.56 % 차이로 전체 2 % 내의 오차를 보였다. 세 번째 실험에서는 2주 동안 측정하였을 때 colloid gel의 선량변화가 1 % 내외로 측정되었다. 네 번째 실험에서는 치료계획과 EBT3 film으로 측정된 결과를 비교하였을 때 6 MV에서는 bolus, rice 모두 비슷한 선량 차이를 보였으며, 9 MeV에서는 photon과 달리 colloid gel이 bolus, rice와 비교하여 선량 차이가 적게 나는 것을 확인하였다. Dose profile 면에서도 colloid gel이 bolus, rice보다 균일한 dose 분포를 보였다. 결 론 : 본 연구에서 방사선치료를 위해 제작된 colloid gel의 밀도는 $1.02g/cm^3$로 물의 밀도와 비슷하며, 방사선치료 과정 동안 변질 및 변형이 확인되지 않았다. Colloid gel 제작 시 밀도에 유의를 해야 하지만, bolus, rice보다 환자의 체표면에 대한 충분한 보상을 통해 선량을 균일하게 전달할 수 있고, 저가에 제작을 할 수 있다는 점에서도 충분한 장점이 있다. 앞으로 임상적용을 위한 추가적인 실험 및 연구를 통해 방사선치료에 적용할 수 있을 것으로 사료된다.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 1993년도 한국우주과학회보 제2권2호
• /
• pp.17-17
• /
• 1993

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70${\pm}$1.32mmHg/min)compared to CF dialyzers(4.32${\pm}$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500,550,570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500,550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100,300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3,000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.

• 대한의용생체공학회:의공학회지
• /
• 제6권2호
• /
• pp.1-8
• /
• 1985

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70$\pm$1.32mmHg/min)compared to CF dialyzers(4.32$\pm$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500, 550, 570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500, 550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100, 300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3, 000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.SpO2 with Plethysmograph.

• 농촌의학ㆍ지역보건
• /
• 제8권1호
• /
• pp.44-65
• /
• 1983

As a part of the epidemiological studies of clonorchiasis, this study was conducted to evaluate the current endemicity and the natural transition of the Clonorchis infection in Gimhae Gun and delta area a high endemic area in Korea in recent years, prior to the introduction of praziquantel which will eventually influence the status of the prevalence. The data obtained in this study in 1983 were evaluated for natural transition of the infection in comparison with those obtained 16 years ago in 1967 by the author(Kim, 1974). The areas of investigation, villages and schools surveyed, methods and techniques used in this study were the same as in 1967, except for the contents of the questionnaire for raw freshwater fish consumption by the local inhabitants. 1) The prevalence rate of clonorchiasis in the general population of the villages was 48.1% on the average out of a total of 484 persons examined. The average of those of the riverside-delta area was 65.2% and 43.0% in the inland area. Among the schoolchildren, the prevalence rate was 8.2% on the average out of a total of 1,423 examined. By area, the prevalence rate was 10.8% in the riverside delta area and 2.8% in the inland area. By sex, difference in the prevalence was seen only in the inhabitants of the inland area showing 52.4% in the male and 33.5% in the female. 2) In the natural transition of the infection, the prevalence rate among the inhabitants has decreased from 68.8% in 1967 to 48.1% in 1983, and in the schoolchildren from 56.4% in 1967 to 8.2% in 1983. The reduction rate was higher in the riverside-delta area than in the inland area. 3) In the prevalence rate by age, 11.9% was first seen in the 5-9 age group and the rate gradually increased up to 75.0% in the 50-59 age group. By sex, the rate was higher in the male than in the female in the 20-29 age group and over. 4) In the natural transition of the prevalence rate by age, the reduction rate of the infection during the past 16 years was greater in the younger age groups up to the 40-49 age group and reached the same level in the age group 50-59. Reduction was seen again in the age group over 60s. By sex, the reduction rate was greater in the female than in the male in the 20-29 age group and over. By area, the reduction rate was greater in the riverside delta area than in the inland area, particularly in the young age groups. 5) In the intensity of the infection among the cases, the mean egg out-put per mg feces per infected cases(EPmg) in the inhabitants was 6.3. EPmg of those of the river-side-delta area was 15.4 and that of the in-land was 2.8. On the other hand, in the schoolchildren, EPmg was 3.2, and no difference was seen between the two areas, the river-side-delta area and the inland area. 6) In the transition of the intensity of the infection by area, EPmg among the inhabitants inexplically increased from 7.8 in 1967 to 15.4 in 1983. This was probably caused by uneven specimen collection in the process of sampling the population. EPmg of the inhabitants in the inland area and those of the schoolchildren of both riverside delta and inland areas showed a similar decrease in the past 16 years. 7) The intensity of the infection by age showed a relatively low level in the 20-29 age group and below, and EPmg 5.1-9.5 was seen in the 30-39 age group and over. Sex, Epmg was 5.8 in the male and 4.7 the female. By in 8) In the transition of the intensity of the infection, EPmg decreased from 6.2 in 1967 to 5.4 in 1983. By age, in contrast to the figures of 1967 in which EPmg gradually increased with some fluctuation from 1.1 in the 0-4 age group to peak 10.5 in the 50-59 age group, in 1983 lower intensity of the infection was seen in the age group from 10-14 to 20-29 with the EPmg range of 0.6-2.7. 9) In the distribution of the clonorchiasis cases by the range of EPmg value, 43.2% of the cases were in 0.1 0.9 and 34.6% in 1.0-4.9. As a whole by cumulative percent, 44.6% of them were under 0.9 as light infection and 86.1% of them under 9.9 up to moderate infection. By sex, no difference was seen in Epmg. 10) In the transition of the distribution by the range of Epmg, the cases were distributed up to the range 80.0-99.9 in 1967 and to 60.0-79.9 in 1983. By cumulative percent, in the range of 0.1-0.9 and less, light infection, 34.3% of them were distributed in 1967 and 44.6% in 1983 with about 10% increase. In the range of 5.0-9.9 and less, up to moderate infection, 83.2% in 1967 and 86.1% in 1983 of the cases were seen, respectively. 11) The practice of raw freshwater fish consumption among the inhabitants seems to have decreased in recent years. Those who admitted to raw freshwater fish consumption in the last two years among the infected inhabitants were 59.3%, although 86.8% of them professed to have experience with raw freshwater fish consumption. 31.7% of those who have had experience of the raw freshwater fish consumption denied any further consumption in recent years. From an interview of 543 school-children, 24.1% of them admitted to an experience of raw freshwater fish consumption. However, those who have practised in the past two years comprized 17.9%. Those who denied raw freshwater fish consumption in recent years among those who had such experience were 26.0% out of 131 interviewed. The rate of raw freshwater fish consumption in both inhabitants and schoolchildren were higher in the male than in the female. On the contrary, the rate of those who did not practise in recent years among those who had experience of raw freshwater fish consumption was higher in the female than in the male. 12) The major reason for the reduction of raw freshwater fish consumption among the local inhabitants was the risk of the fluke infection. However, it has become apparent that such change of taste has resulted from water pollution impact which has affected throughout the areas of the freshwater systems in this locality since last several years. 13) In animal survey, Clonorchis infection was seen in 14.8% of 88 dogs examined and 3.7% of 27 house rats examined. It was noted that populations of dogs and cats have increased in the villages surveyed. Although the prevalence rate was lower in the present survey than those of 1967, the significance of the animals as the reservoir host has not changed. 14) Prevalence rate of Clonorchis infection by cercariae in the first intermediate host, Parafossarulus manchouricus, was 0.6% out of 517 snails examined. The infection rate was lower in comparison with 2.3% out of 2,124 examined in 1967. Moreover, sharp decreases in number and distribution of the intermediate host snails in many watershed areas of the huge freshwater systems in this locality seemed to reduce transmission of Clonorchis in connection with the intermediate host stage of its life cycle. 15) Clonorchis infection in the second intermediate fish hosts was relatively low. The mean number of Clonorchis metacercaria per fish in Pseudorasbora parva was 517 in 1983, whereas it was 1943 in 1968 through 1969. Environmental water pollution has also caused the decreased fish population density in these areas, and this has also apparently affected to the practice of raw freshwater fish consumption among the local inhabitants. 16) In conclusion, endemicity of Clonorchis infection in Gimhae Gum and delta area of the Nagdong River has sharply decreased during the past 16 years. The major cause of the regressive transition of the infection was the water pollution of the land water systems of this locality. The pollution has upset the ecosystems comprizing of the intermediate hosts of Clonorchis in many areas, and also affected to a significant extent to the discontinuance of the local inhabitants for raw freshwater fish consumption.

• Asia Marketing Journal
• /
• 제14권2호
• /
• pp.177-207
• /
• 2012

문화예술상품은 일반 소비재와 달리 소비자의 가치인식에 따라 중요한 소비의 대상이 되기도 하고 그렇지 못할 수도 있는 특별한 상품이다. 물질적 소비재나 서비스 상품은 상품속성이 주는 물질적 및 비물질적 혜택을 상정하여 상품을 개발하고 그에 따른 마케팅전략을 수립하는 것이 효과적일 수 있다. 그러나 문화예술상품 소비는 소비자의 경험과 교육 등에 의해 형성된 문화예술에 대한 가치인식에 따라 소비추구혜택이 달라질 수 있고, 가치인식과 추구혜택은 문화예술상품의 속성을 선택하는 기준에 영향을 미칠 수 있을 것이다. 본 연구는 '문화예술상품에 대한 가치인식과 추구혜택에 관한 질적 연구'의 후속연구로서 질적 연구에서 나타난 개념구조를 바탕으로 문화예술상품에 대한 소비자의 가치인식 및 추구혜택과 상품속성의 하위차원을 규명하고, 수단-목적 사슬이론을 역으로 적용하여 문화예술상품에 대한 소비자의 가치인식이 추구혜택과 상품속성에 미치는 영향을 규명하고자 하였다. 그리하여 문화예술상품 생산 및 문화예술 정책기관과 문화예술을 활용하는 기업의 문화마케팅의 효율성을 제고하기 위한 실무적 시사점을 제시하고자 실시되었다. 10대 이상 50대 남녀 662명을 대상으로 자료를 수집하고 요인분석과 경로분석을 실시하였다. 예술상품에 대한 소비자의 가치인식과 추구혜택의 하위차원은 질적 연구 결과와 유사하게 나타났으며, 가치인식은 대부분 추구혜택을 매개로 하여 상품속성에 영향을 미치는 것으로 나타나 질적 연구결과와 마찬가지로 수단-목적사슬을 역방향으로 적용하는 것이 타당함을 입증하였다. 즉, 문화예술상품에 대한 소비자의 가치인식이 실제적 편익으로 구체화되고, 소비자는 이러한 추구혜택에 따라 상품속성의 중요도를 고려하여 구매의사를 결정하는 것으로 볼 수 있다. 본 연구는 문화예술상품에 대한 소비자의 가치인식을 긍정적으로 형성·강화시키는 것이 가장 중요한 소비 촉진 요인임을 입증하였으며, 문화예술상품 생산기관에서 소비자 중심의 상품개발과 기업의 효율적인 문화예술마케팅 전략을 개발하기 위한 소비자 정보와 실무적 시사점을 제시하였다. 또한 본 연구 결과는 국민의 삶의 질을 향상시키고자 하는 국가기관의 정책 수립을 위한 유용한 정보로 활용될 수 있을 것이다.

• 대한간호학회지
• /
• 제11권2호
• /
• pp.83-104
• /
• 1981

Hemodialysis is essential treatment for the chronic renal failure patient's long-term cure and for the patient management before and after kidney transplantation. It sustains the endstage renal failure patient's life which didn't get well despite strict regimen and furthermore it becomes an essential treatment to maintain civil life. Bursing implementation in hemodialysis may affect the significant effect on patient's life. The purpose of this study was to obtain the basic data to solve the hypotension problem encountable to patient and the blood loss problem affecting hemodialysis patient'a anemic states by incomplete rinsing of blood in coil through all process of hemodialysis. The subjects for this study were 44 patients treated hemodialysis 691 times in the hemodialysis unit, The .data was collected at Gang Nam 51. Mary's Hospital from January 1, 1981 to April 30, 1981 by using the direct observation method and the clinical laboratory test for laboratory data and body weight and was analysed by the use of analysis of Chi-square, t-test and anlysis of varience. The results obtained an follows; A. On clinical laboratory data and other data by dialysis Procedure. The average initial body weight was 2.37 ± 0.97kg, and average body weight after every dialysis was 2.33 ± 0.9kg. The subject's average hemoglobin was 7.05±1.93gm/dl and average hematocrit was 20.84± 3.82%. Average initial blood pressure was 174.03±23,75mmHg and after dialysis was 158.45±25.08mmHg. The subject's average blood ion due to blood sample for laboratory data was 32.78±13.49cc/ month. The subject's average blood replacement for blood complementation was 1.31 ±0.88 pint/ month for every patient. B. On the hypotensive state and the coping approaches occurrence rate of hypotension was 28.08%. It was 194 cases among 691 times. 1. In degrees of initial blood pressure, the most 36.6% was in the group of 150-179mmHg, and in degrees of hypotension during dialysis, the most 28.9% in the group of 40-50mmHg, especially if the initial blood pressure was under 180mmHg, 59.8% clinical symptoms appeared in the group of“above 20mmHg of hypotension”. If initial blood pressure was above 180mmHg, 34.2% of clinical symptoms were appeared in the group of“above 40mmHg of hypotension”. These tendencies showed the higher initial blood pressure and the stronger degree of hypotension, these results showed statistically singificant differences. (P=0.0000) 2. Of the occuring times of hypotension,“after 3 hrs”were 29.4%, the longer the dialyzing procedure, the stronger degree of hypotension ann these showed statistically significant differences. (P=0.0142). 3. Of the dispersion of symptoms observed, sweat and flush were 43.3%, and Yawning, and dizziness 37.6%. These were the important symptoms implying hypotension during hemodialysis accordingly. Strages of procedures in coping with hypotension were as follows ; 45.9% were recovered by reducing the blood flow rate from 200cc/min to 1 00cc/min, and by reducing venous pressure to 0-30mmHg. 33.51% were recovered by controling (adjusting) blood flow rate and by infusion of 300cc of 0,9% Normal saline. 4.1% were recovered by infusion of over 300cc of 0.9% normal saline. 3.6% by substituting Nor-epinephiine, 5.7% by substituting blood transfusion, and 7,2% by substituting Albumin were recovered. And the stronger the degree of symptoms observed in hypotention, the more the treatments required for recovery and these showed statistically significant differences (P=0.0000). C. On the effects of the changes of blood pressure and osmolality by albumin and hemofiltration. 1. Changes of blood pressure in the group which didn't required treatment in hypotension and the group required treatment, were averaged 21.5mmHg and 44.82mmHg. So the difference in the latter was bigger than the former and these showed statistically significant difference (P=0.002). On the changes of osmolality, average mean were 12.65mOsm, and 17.57mOsm. So the difference was bigger in the latter than in the former but these not showed statistically significance (P=0.323). 2. Changes of blood pressure in the group infused albumin and in the group didn't required treatment in hypotension, were averaged 30mmHg and 21.5mmHg. So there was no significant differences and it showed no statistical significance (P=0.503). Changes of osmolality were averaged 5.63mOsm and 12.65mOsm. So the difference was smaller in the former but these was no stitistical significance (P=0.287). Changes of blood pressure in the group infused Albumin and in the group required treatment in hypotension were averaged 30mmHg and 44.82mmHg. So the difference was smaller in the former but there is no significant difference (P=0.061). Changes of osmolality were averaged 8.63mOsm, and 17.59mOsm. So the difference were smaller in the former but these not showed statistically significance (P=0.093). 3. Changes of blood pressure in the group iutplemented hemofiltration and in the Uoup didn't required treatment in hypotension were averaged 22mmHg and 21.5mmHg. So there was no significant differences and also these showed no statistical significance (P=0.320). Changes of osmolality were averaged 0.4mOsm and 12.65mOsm. So the difference was smaller in the former but these not showed statistical significance（P=0.199). Changes of blood pressure in the group implemented hemofiltration and in the group required treatment in hypotension were averaged 22mmHg and 44.82mmHg. So the difference was smatter in the former and these showed statistically significant differences (P=0.035). Changes of osmolality were averaged 0.4mOsm and 17.59mOsm. So the difference was smaller in the former but these not showed statistical significance (P=0.086). D. On the changes of body weight, and blood pressure, between the group of hemofiltration and hemodialysis. 1, Changes of body weight in the group implemented hemofiltration and hemodialysis were averaged 3.340 and 3.320. So there was no significant differences and these showed no statistically significant difference, (P=0.185) but standard deviation of body weight averaged in comparison with standard difference of body weight was statistically significant difference (P=0.0000). Change of blood Pressure in the group implemented hemofiltration and hemodialysis were averaged 17.81mmHg and 19.47mmHg. So there was no significant differences and these showed no statistically significant difference (P=0.119), But in comparison with standard deviation about difference of blood pressure was statistically significant difference. (P=0.0000). E. On the blood infusion method in coil after hemodialysis and residual blood losing method in coil. 1, On comparing and analysing Hct of residual blood in coil by factors influencing blood infusion method. Infusion method of saline 200cc reduced residual blood in coil after the quantitative comparison of Saline Occ, 50cc, 100cc, 200cc and the differences showed statistical significance (p < 0.001). Shaking Coil method reduced residual blood in Coil in comparison of Shaking Coil method and Non-Shaking Coil method this showed statistically significant difference (P < 0.05). Adjusting pressure in Coil at OmmHg method reduced residual blood in Coil in comparison of adjusting pressure in Coil at OmmHg and 200mmHg, and this showed statistically significant difference (P < 0.001). 2. Comparing blood infusion method divided into 10 methods in Coil with every factor respectively, there was seldom difference in group of choosing Saline 100cc infusion between Coil at OmmHg. The measured quantity of blood loss was averaged 13.49cc. Shaking Coil method in case of choosing saline 50cc infusion while adjusting pressure in coil at OmmHg was the most effective to reduce residual blood. The measured quantity of blood loss was averaged 15.18cc.

• 농업과학연구
• /
• 제1권1호
• /
• pp.67-81
• /
• 1974

감자를 탁주(濁酒) 원료(原料)로 사용(使用)하기 위(爲)하여 증자건조분쇄(蒸煮乾燥粉碎)하고 이들의 화학성분(化學成分)을 분석(分析)하였으며 서분(薯粉)을 이용(利用)한 입국제조조건(粒麴製造條件), 담금조건(條件) 및 원료(原料)를 달리하였을 때에 술덧 성분(成分)에 미치는 영향(影響)을 검토(檢討)함과 아울러 술덧 숙성중(熟成中) 제성주(製成酒)의 보존중(保存中)에 있어서의 화학성분(化學成分) 및 microfiora의 변화(變化) 기타(其他) 시험양조주(試驗釀造酒)의 관능검사등(官能檢査等)을 행(行)하여 다음과 같은 결과를 얻었다. 증서(蒸薯)와 서분(薯粉)의 화학성분(化學成分)은 각각(各各) 수분(水分) 76.2, 10.8%, 총당(總糖) 16.1, 69.8%, 환원당(還元糖) 3.45, 13.4%, 조단백질(粗蛋白質) 2.1, 11.3%, 총산(總酸) 0.012, 0.023%, 휘발산(揮發酸) 0.0012, 0.0025%이었다. 2. 서분(薯粉)을 이용(利用)한 입국제조(粒麴製造) 조건(條件)이 술덧 성분(成分)에 미치는 영향(影響)을 검토(檢討)한 결과(結果) 원료분(原料粉)에 대하여 40~50%의 물을 혼화(混和)하여 상법(常法)에 의(依)해서 48시간(時間) 배양(培養)하는 것이 효과적(效果的)이었으며 이와같은 조건하(條件下)하에서 제조(製造)한 입국(粒麴)의 액화형(液化型) 및 당화형(糖化型) amylase의 역가(力價)는 각각(各各) $D40^{\circ}$30', 128 W.V., 13.2A.U.이었다. 3. Table 1에서 표시(表示)한 기본(基本) 담금비율중(比率中) 여러 가지 조건(條件)을 변화(變化)시켰을 때에 술덧 성분(成分)에 미치는 영향(影響)을 검토(檢討)하여 다음과 같은 결과(結果)를 얻었다. (1) 1단(段) 담금 할 때에는 원료입국(原料粒麴) 60g에 대(對)하여 140ml의 물을, 2단(段) 담금 할 때에는 원료(原料) 140g에 대(對)하여 260ml의 물을 첨가(添加)하는 것이 가장 효과적(效果的)이었다. (2) 1단(段)을 $25^{\circ}C$, 2단(段)을 $30^{\circ}C$에서 산효(酸酵)시킬 때 1, 2단(段) 모두 48시간(時間)씩 발효(醱酵)시키는 것이 가장 효과적(效果的)이었다. (3) 분국(粉麴)은 1단(段)에 0.5%, 2단(段)에 1.0%를 첨가(添加)하는 것이 가장 효과적(效果的)이었고 입국(粒麴)은 20~30% 사용시(使用時)에 술덧 성분상(成分上)에 큰 차이(差異)를 나타내지 않았다. (4) 증서분(蒸薯粉)과 생서분(生薯粉)을 사용(使用)하여 탁주(濁酒)를 제조(製造)하였을 때 술덧중(中)의 methanol 함량(含量)은 각각(各各) 0.03% 및 0.06%이었다. (5) 서분(薯粉)을 원료(原料)로 양조(釀造)하였을 때는 소맥분(小麥粉)을 원료(原料)로 사용(使用)하였을 때에 비(比)하여 주도(酒度), fusel oil 및 Formol-N의 함량(含量)이 낮고 methanol의 함량(含量) 및 산도(酸度)는 높았다. 4. 서분(薯粉)을 원료(原料)로하여 1단(段)에서 24시간(時間), 2단(段)에서 96시간(時間)까지 발효(醱酵)시키면서 발효기간중(醱酵期間中)의 화학성분(化學成分) 및 microfora의 변화(變化)를 측정(測定)한 결과 (1) Alcohol 함량(含量)은 72시간(時間)까지 계속증가(繼續增加)하여 11.9%에 달(達)하였으며 그 후(後)에는 약간(若干) 감소(減少)하였다. (2) 총당량(總糖量)은 48~72시간(時間)까지 급격(急激)히 감소(減少)하여 72시간(時間)에 2.62%에 달(達)하였으며 그 후(後)에는 서서(徐徐)히 감소(減少)되었다. (3) 환원당량(還元糖量)도 점차(漸次) 감소(減少)하였으며 48시간(時間)에 0.29%에 달(達)하였으며 그 후(後)에는 약간(若干)의 증감(增減)을 나타내었다. (4) 총산도(總酸度), 휘발산도(揮發酸度) 및 Formol-N의 함량(含量)은 점차(漸次) 증가(增加)하여 48시간(時間) 후(後)에는 각각(各各) 7.30, 0.20, 2.55에 달(達)하고 그 후(後)에도 약간(若干)씩 증가(增加)하는 傾向)을 나타내었다. (5) 총효모수(總酵母數)는 72시간(時間)에 최고(最高)($2.1{\times}10^8$)에 달(達)하였으며 그 후(後)에는 점차(漸次) 감소(減少)하였다. (6) 총세균수(總細菌數)는 48시간(時間)에 최고(最高)($2.4{\times}10^8$)에 달(達)하였으며 그 후(後)에는 약간(若干)의 증감현상(增減現象)을 나타내었다. 5. 서분(薯粉)으로 양조(釀造)한 탁주(濁酒)를 alcohol 함량(含量) 6%가 되도록 제성(製成)하여 $30^{\circ}C$에 72시간(時間) 보존(保存)하면서 주도(酒度), 산도(酸度), 총효모수(總酵母數) 및 총세균수(總細菌數)의 변화(變化)를 측정(測定)한 결과(結果) (1) alcohol 함량(含量)은 24시간(時間)에 약간(若干) 증가(增加)(6.2%)하였다가 그 후(後)에는 점차(漸次) 감소(減少)하였다. (2) 총산도(總酸度)는 제성직후(製成直後) 3.8이었든 것이 72시간에 6.1에 달(達)하도록 증가(增加)하였다. (3) 총효모수(總酵母數) 및 총세균수(總細菌數)는 48시간(時間)에 최고(最高)에 달(達)하여 각각(各各) $1.5{\times}10^8$ 및 $2.3{\times}10^8$이 되었으며 그 후(後)에는 점차감소(漸次減少)하였다. 6. 서분국(薯粉麴) 및 소맥분국(小麥粉麴)을 사용(使用)하여 1단(段) 담금하고 2단(段)에 이들의 5배량(倍量)의 증서(蒸薯)를 담금하여 발효(醱酵)시킨 결과(結果) alcohol함량(含量) 9.8~11.3%, 총산도(總酸度) 5.8~7.4, Formol-N 2.5~3.3의 색택양호(色澤良好)한 술덧을 얻었다. 7. 서분(薯粉), 소맥분(小麥粉) 및 증서(蒸薯)를 여러가지 비율(比率)이 되도록 시험양조(試驗釀造)하여 alcohol 함량(含量) 6%가 되도록 제성(製成)한 후(後) 관능시험(官能試驗)을 행(行)한 결과(結果) 소맥분(小麥粉)과 증서(蒸薯)의 비율(比率)을 4:5 또는 3.5:7.5가 되도록하여 양조(釀造)한 탁주(濁酒)는 소맥분(小麥粉) 전용탁주(專用濁酒)와 관능면(官能面)에서 유의차(有意差)가 인정(認定)되지 않았으며, 소맥분(小麥粉)과 서분(薯粉)의 비율(比率)을 1:1 또는 3:7의 비율(比率)이 되도록하여 양조(釀造)한 탁주(濁酒)는 상기(上記) 3종류(種類)의 탁주(濁酒)와 고도(高度)의 유의성(有意性)이 인정(認定)되었다.

• Applied Biological Chemistry
• /
• 제17권2호
• /
• pp.81-92
• /
• 1974

감자를 탁주(濁灌) 원료(原料)로 사용(使用)하기 위(爲)하여 증자(蒸煮), 건조(乾燥) 분쇄(粉碎)하고 이들의 화학성분(化學成分)을 분석(分析)하였으며 서분(薯粉)을 이용(利用)한 입국제조조건(粒麴製造條件), 담금조건(條件) 및 원료(原料)를 달리하였을 때에 술덧 성분(成分)에 미치는 영향(影響)을 검토(檢討)함과아울러 술덧 숙성중(熱成中) 및 제성주(製成酒)의 보존중(保存中)에 있어서의 화학성분(化學成分) 및 microflora의 변화(變化) 기타(其他) 시험양조주(試驗釀造酒)의 관능검사(官能檢査) 등(等)을 행(行)하여 다음과 같은 결과를 얻었다 1. 증서(蒸著)와 서분(薯粉)의 화학성분(化學成分)은 각각(各各) 수분(水分) 76.2, 10.8%, 총당(總糖) 16.1, 69.8%, 환원당(還元糖) 3.45, 13.4% 조단백질(粗蛋白質) 2.1, 11.3% 총산(總酸) 0.012, 0.023%, 휘발산(揮發酸) 0.0012, 0.0025%이었다. 2. 서분(薯粉)을 이용(利用)한 이북제조(粒麴製造) 조건(條件)이 술덧 성분(成分)에 미치는 영향(影響)을 검토(檢討)한 결과(結果) 원료분(原料紛)에 대하여 $40{\sim}50%$의 물을 혼화(混和)하여 상법(常法)에 의(依)해서 48시간(時間) 배양(培養)하는것이 효과적(效果的)이었으며 이와같은 조건하(條件下)에서 제조(製造)한 입국(粒麴)의 액화형(液化型) 및 당화형(糖化型) amylase의 역가(力價)는 각각(各各) D $40^{\circ}$30‘, 128 W.V., 13.2A.U.이었다. 3. Table I에서 표시(表示)한 기본(基本) 담금비율중(比率中) 여러가지 조건(條件)을 변화(變化)시켰을 때에 술덧 성분(成分)에 미치는 영향(影響)을 검토(檢討)하여 다음과 같은 결과(結果)를 얻었다. (1) 1단(段) 담금 할 때에는 원료입국(原料粒麴) 60g에 대(對)하여 140ml의 물을, 2단(段) 담금 할 때에는 원료(原料) 140g에 대(對)하여 260ml의 물을 첨가(添加)하는 것이 가장 효과적(效果的)이었다. (2) 1단(段)을 $25^{\circ}C$, 2단(段)을 $30^{\circ}C$에서 발효(醱酵)시킬 때 1, 2단(段) 모두 48시간(時間)씩 발효(醱酵)시키는 것이 가장 효과적(效果的)이었다. (3) 분국(粉麴)은 1단(段)에 0.5%, 2단(段)에 1.0%를 첨가(添加)하는 것이 가장 효과적(效果的)이었고 입국(粒麴)은 20${\sim}$30% 사용시(使用時)에 술덧 성분상(成分上)에 큰 차이(差異)를 나타내지 않았다. (4) 증서분(蒸薯努)과 생서분(生薯粉)을 사용(使用)하여 탁주(濁酒)를 제조(製造)하였을때 술덧중(中)의 methanol 함량(含量)은 각각(各各) 0.03%, 및 0.06%이었다. (5) 서분(薯粉)을 원료(原料)로 양조(釀造)하였을 때는 소맥분(小麥粉)을 원료(原料)로 사용(使用)하였을 때에 비(比)하여 주도(酒度), fusel oil 및 Formol-N의 함량(含量)이 낮고 methanol의 함량(含量) 및 산도(酸度)는 높았다. 4. 서분(薯粉)을 원료(原料)로하여 1단(段)에서 24시간(時間), 2단(段)에서 96시간(時間)까지 발효(醱酵)시키면서 발효기간중(醱酵期間中)의 화학성분(化學成分) 및 microfora의 변화(變化)를 측정(測定)한 결과 (1) Alcohol 함량(含量)은 72시간(時間)까지 계속(繼續) 증가(增加)하여 11.9%에 달(達)하였으며 그 후(後)에는 약간(若干) 감소(減少)하였다. (2) 총당량(總糖量)은 $48{\sim}72$시간(時間)까지 급격(急激)히 감소(減少)하여 72시간(時間)에 2.62%에 달(達)하였으며 그 후(後)에는 서서(徐徐)히 감소(減少)되었다. (3) 환원당량(還元糖量)도 점차(漸次) 감소(減少)하였으며 48시간(時間)에 0.29%에 달(達)하였으며 그 후(後)에는 약간(若干)의 증감(增減)을 나타내었다. (4) 총산도(總酸度), 휘발산도(揮發酸度) 및 Formol-N의 함량(含量)은 점차(漸次) 증가(增加)하여 48시간(時間) 후(後)에는각각(各各) 7.30, 0.20, 2.55에 달(達)하고 그 후(後)에도 약간(若干)씩 증가(增加)하는 경향(傾向)을 나타내었다. (5) 총효모수(總酵母數)는 72시간(時間)에 최고(最高)($2.1{\times}10^8$)에 달(達)하였으며 그 후(後)에는 점차(漸次) 감소(滅少)하였다. (6) 총세균수(總細菌數)는 48시간(時間)에 최고(最高)($2.4{\times}10^8$)에 달(達)하였으며 그 후(後)에는 약간(若干)의 증감현상(增減現象)을 나타내였다. 5. 서분(薯粉)으로 양조(釀造)한 탁주(濁酒)를 alcohol 함량(含量) 6%가 되도록 제성(製咸)하여 $30^{\circ}C$에 72시간(時間) 보존(保存)하면서 주도(酒度), 산도(酸度), 총효모수(總酵母數) 및 총세균수(總細菌數)의 변화(變化)를 측정(測定)한 결과(結果) (1) alcohol 함량(含量)은 24시간(時間)에 약간(若干) 증가(增加)(6.2%) 하였다가 그 후(後)에는 점차(漸次) 감소(減少)하였다. (2) 총산도(總酸度)는 제성직후(製成直後) 3.8이었든것이 72시간(時間)에 6.1에 달(達)하도록 증가(增加)하였다. (3) 총효모수(總酵母數) 및 총세균수(總細菌數)는 48시간(時間)에 최고(最高)에 달(達)하여 각각(各各) $1.5{\times}10^8$ 및 $2.3{\times}10^8$이 되었으며 그 후(後)에는 점차감소(漸次減少)하였다. 6. 서분국(薯粉麴) 및 소맥분국(小麥粉麴)을 사용(使用)하여 1단(段) 담금하고 2단(段)에 이들의 5배량(倍量)의 증서(蒸薯)를 담금하여 발효(醱酵)시킨 결과(結果) alcohol함량(含量) 9.8${\sim}$11.3%, 총산도(總酸度) 5.8${\sim}$7.4 Formol-N 2.5${\sim}$3.3의 색택양호(色澤良好)한 술덧을 얻었다. 7. 서분(薯粉), 소맥분(小麥粉) 및 증서(蒸薯)를 여러가지 비율(比率)이 되도록 시험양조(試驗讓造)하여 alcohol함량(含量) 6%가 되도록 제성(製成)한 후(後) 관능시험(官能試驗)을 행(行)한 결과(結果) 소맥분(小麥粉)과 증서(蒸蓄)의 비율(比率)을 4 : 5 또는 3.5 : 7.5가 되도록하여 양조(釀造)한 탁주(濁酒)는 소맥분(小麥粉) 전용탁주(專用濁酒)와 관능면(官能面)에서 유의차(有意差)가 인정(認定)되지 않았으여 소맥분(小麥粉)과 서분(薯紛)의 비율(比率)을 1 : 1 또는 3 : 7의 비율(比率)이 되도록하여 양조(釀造)한 탁주(濁酒)는 상기(上記) 3종류(種類)의 탁주(濁酒)와 고도(高度)의 유의성(有意性)이 인정(認定)되었다.

• 한국유통학회지:유통연구
• /
• 제16권2호
• /
• pp.119-138
• /
• 2011

지난 십년동안 인터넷을 통한 전자상거래는 빠른 속도로 성장해 왔다. 이러한 인터넷의 발달은 기업들의 사업방식에 많은 변화를 유도했으며, 그 중에서도 마케팅경로의 구조와 경로 구성원들 사이의 관계에 중요한 변화를 초래하고 있다. 각 기업이 처한 시장환경은 다양하며 이 다양한 시장 환경은 인터넷 경로가 각 시장에 미치는 효과를 조절하는 역할을 한다. 이러한 시장의 다양성에도 불구하고 지금까지의 선행연구들은 각기 특정한 하나의 시장상황(unique setting)을 상정하여 인터넷경로 도입이 그 시장에 미치는 영향을 분석하는데 그쳐왔다. 이러한 기존 연구의 공백을 채우기 위해 본 연구는 시장의 다양성을 소비자의 지리적 분포, 시장의 인터넷 수용도의 측면에서 살펴보고 이러한 시장 환경이 인터넷 경로 도입 효과에 미치는 영향에 관하여 조사해 보고자 한다. 이를 위해 본 연구는 다양한 소비자들의 지리적 분포, 경쟁강도, 소비자의 인터넷 상거래에 대한 수용도 등을 포함한 다양한 시장 환경을 수요모형에 반영시켜 그 영향력 분석을 가능하도록 하였다. 그러나, 다양한 시장 요소를 모형에 반영하는 과정에서 수요모형이 복잡한 구조를 가지게 되었다. 이 문제를 극복하고 게임이론의 균형해를 도출하기 위해 Newton-Raphson algorithm을 사용한 numerical search 방법을 사용하였다. 분석결과 두 종류의 경로에 대한 소비자선호의 분포에 따라 생산자의 가격차별정도, 생산자와 독립소매상 간의 경로이윤 배분율, 그리고 인터넷경로 도입이 각 경로주체의 이윤 향상에 도움이 되는지의 여부, 소비자잉여 등이 달라질 수 있음을 발견하였다. 끝으로 연구의 학술적, 실무적 시사점과 한계점 및 향후 연구방향도 논의되었다.