• Journal of Wetlands Research
• /
• v.24 no.2
• /
• pp.83-92
• /
• 2022

The amount of the plastic waste has been increasing according to global demand for plastic. Microplastics are the most hazardous among all plastic pollutants due to their toxicity and unknown physicochemical properties. This study investigates the optimal methodology that can be applied to sewage samples for detecting microplastics before discussing reducing microplastics in MWTPs. In this study, the effect of different pretreatment methods while detecting microplastic analysis of MWTP influent samples was investigated; the samples were collected from the J sewage treatment plant. There are many pretreatment methods but two of them are widely used: Fenton digestion and hydrogen peroxide oxidation. Although there are many pretreatment methods that can be applied to investigate microplastics, the most widely used methods for sewage treatment plant samples are Fenton digestion and H₂O₂ oxidation. For each pretreatment method, there were factors that could cause an error in the measurement. To overcome this, in the case of the Fenton digestion pretreatment, it is recommended to proceed with the analysis by filtration instead of the density separation method. In the case of the H₂O₂ oxidation method, the process of washing with distilled water after the reaction is recommended. As a result of the analysis, the concentration of microplastics was measured to be 2.75ea/L for the sample using the H₂O₂ oxidation method and 3.2ea/L for the sample using the Fenton oxidation method, and most of them were present in the form of fibers. In addition, it is difficult to guarantee the reliability of measurement results from quantitative analysis performed via microscope with eyes. A calibration curve was created for prove the reliability. A total of three calibration curves were drawn, and as a result of analysis of the calibration curves, all R² values were more than 0.9. This ensures high reliability for quantitative analysis. The qualitative analysis could determine the series of microplastics flowing into the MWTP, but could not confirm the chemical composition of each microplastic. This study can be used to confirm the chemical composition of microplastics introduced into MWTP in the future research.

• Journal of Nutrition and Health
• /
• v.56 no.4
• /
• pp.419-438
• /
• 2023

Purpose: This study examines the effectiveness of personalized goal setting and smartphone-based nutrition counseling among adults in their 20s and 30s. Methods: Nutrition counseling was conducted for a total of 30 adults through a 1:1 chat room of a mobile instant messenger, once a week for 8 weeks. The first week of counseling included a preliminary online questionnaire survey and a dietary intake survey. Based on the results of the preliminary survey, 2 dietary goals were set in the second week and the participants were asked to record their achievements on a daily checklist. From the third week onwards, counselors sent feedback messages based on the checklist and provided information on dietary guidelines in a card news format every week. Post-counseling questionnaires and dietary intake surveys were conducted in the seventh week. Changes in dietary habits during the counseling were reviewed in the eighth week, followed by a questionnaire survey on the evaluation of the counseling process. Results: The nutrition quotient (NQ) scores and self-efficacy scores were significantly higher after nutrition counseling. The NQ scores of consumption frequencies of fruits, milk and dairy products, nuts, fast food, Ramyeon, sweet and greasy baked products, sugarsweetened beverages, the number of vegetable dishes at meals, and breakfast frequency were significantly higher after nutrition counseling. The intake of protein, vitamin A, thiamin, riboflavin, folate, calcium, and iron, and the index of nutritional quality of vitamin A, riboflavin, folate, calcium, and iron were higher after nutrition education. The participants were satisfied with the nutrition counseling program and the provided nutrition information. Conclusion: Personalized goal setting and smartphone-based nutrition counseling were found to be effective in improving the quality of diet and self-efficacy in young adults. Similar results were obtained in both the underweight/normal weight and the overweight/obese groups.

• Korean Journal of Remote Sensing
• /
• v.39 no.3
• /
• pp.363-370
• /
• 2023

Various earth observation satellites need to provide accurate and high-quality data after launch. To maintain and enhance the quality of satellite data, it is crucial to employ a cross-calibration process that accounts for differences in sensor characteristics, such as the spectral band adjustment factor (SBAF). In this study, we utilized Landsat-8 and Sentinel-2A satellite imagery collected from desert sites in Libya4, Algeria3, and Mauritania2 among pseudo-invariant calibration sites to calculate and apply SBAF, thereby compensating the uncertainties arising from variations in bandwidths. We quantitatively compared the reflectance differences based on the similarity of bandwidths, including Blue, Green, Red, and both the near-infrared (NIR) narrow, and NIR bands of Sentinel-2A. Following the application of SBAF, significant results with reflectance differences of approximately 1% or less were observed for all bands except NIR. In the case of the Sentinel-2A NIR band, it exhibited a significantly larger bandwidth difference compared to the NIR narrow band. However, after applying SBAF, the reflectance difference fell within the acceptable error range (5%) of 1-2%. It indicates that SBAF can be applied even when there is a substantial difference in the bandwidths of the two sensors, particularly in situations where satellite utilization is limited. Therefore, it was determined that SBAF could be applied even when the bandwidth difference between the two sensors is large in a situation where satellite utilization is limited. It is expected to be helpful in research utilizing the quality and continuity of satellite data.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.7 no.1
• /
• pp.118-130
• /
• 2005

This study was conducted to evaluate the spent composts of selenium-enriched mushrooms as a feed selenium Source. Total selenium (Se) contents and Se profiles in the spent mushroom composts (SMC) were determined. In addtion, we also investigated the metabolism in relation to Se accumulation in the mushroom. Mushrooms used in this study were Flammulina velutipes and Se enriched mushrooms were grown for 60 days by adding 2 mg of inorganic Se (Na₂SeO₃) per kg of mushroom composts (MC) on as-fed basis and it was compared with mushrooms not to add Se to the MC. Total Se contents for Se-treated mushrooms were significantly increased (P<0.0001) by 20-fold (4.51 ㎍/g of dry) compared to Se-untreated (0.23 ㎍/g of dry). On the contrary, organic Se proportion was significantly lower (P<0.0001) in the Se-treated mushroom (72.3%) than Se-untreated (100%, not analytically detected of inorganic Se). Se distribution upon a length in the Se-treated mushrooms was the highest in the bottom part (6.86 ㎍/g of dry) near to MC, and top and middle parts were significantly lower (3.71 and 3.01 ㎍/g of dry, respectively) than the bottom (P<0.001). In the SMC from Se-treated mushrooms, a high concentration of Se (5.04 ㎍/g of dry) was still remained, but that from Se-untreated mushrooms was significantly low (P<0.0001) as 0.08 ㎍/g of dry. Se-treated SMC showed a high rate of organic Se (65.67%), suggesting that most of inorganic Se in the SMC was converted to organic Se by mushroom mycelia, and Se-untreated SMC showed 100% of organic Se, not being detected of inorganic Se. Prior to mycelia inoculation in the mushroom culture, the sterilization of MC brought approximately 18% of Se loss in the MC. This result is in accordance with facts generally known that Se is weak in the high temperature and it is consequently volatilized under that condition. Apparent and net accumulation rates (%) for Se into mushrooms were 14.81 and 10.14%, respectively and their difference (4.67%) is considered that it is due to the volatilization into the air via metabolic process of mushroom itself. From the result of this study, inorganic Se addition to MC for mushroom improved the Se content in the mushroom and SMC from Se-enriched mushrooms contained a high concentration of Se. Mycelium and fruiting body from mushrooms converted inorganic Se in MC to organic Se, indicating a high proportion of organic Se in the mushroom and SMC. Therefore, Se in Se-enriched mushroom and SMC was recognized as Se sources of food for human as well as feed for livestock.

• Resources Recycling
• /
• v.31 no.6
• /
• pp.44-51
• /
• 2022

In the steelmaking process using an electric arc furnace (EAF), light-burnt dolomite, which is a flux containing MgO, is used to protect refractory materials and improve desulfurization ability. Furthermore, a recarburizing agent is added to reduce energy consumption via slag foaming and to induce the deoxidation effect. Herein, a waste MgO-C based refractory material was used to achieve the aforementioned effects economically. The waste MgO-C refractory materials contain a significant amount of MgO and graphite components; however, most of these materials are currently discarded instead of being recycled. The mass recycling of waste MgO-C refractory materials would be achievable if their applicability as a flux for steelmaking is proven. Therefore, experiments were performed using a target composition range similar to the commercial EAF slag composition. A pre-melted base slag was prepared by mixing SiO₂, Al₂O₃, and FeO in an alumina crucible and heating at 1450℃ for 1 h or more. Subsequently, a mixed flux #2 (a mixture of light-burnt dolomite, waste MgO-C based refractory material, and limestone) was added to the prepared pre-melted base slag and a melting reaction test was performed. Injecting the pre-melted base slag with the flux facilitates the formation of the target EAF slag. These results were compared with that of mixed flux #1 (a mixture of light-burnt dolomite and limestone), which is a conventional steelmaking flux, and the possibility of replacement was evaluated. To obtain a reliable evaluation, characterization techniques like X-ray diffraction (XRD) analysis and X-ray fluorescence (XRF) spectrometry were used, and slag foam height, slag basicity, and Fe recovery were calculated.

• Korean Chemical Engineering Research
• /
• v.61 no.2
• /
• pp.302-311
• /
• 2023

This study was conducted to evaluate the applicability of castor oil (CSO) as a natural wood preservative. CSO was treated into wood blocks prepared with domestic and imported wood species using a vacuum-pressure method, and then treatability, leachability and decay resistance of the CSO-treated wood blocks were examined. Although CSO was penetrated effectively into wood blocks of all wood species, the CSO-treatability was the highest in Western hemlock, followed by Japanese larch (LA), soft maple and Mongolian oak due to the difference of its anatomical structure. Except for LA, the more retained, the more leached during a saline water-immersing process for 48h. The use of ethanol added to reduce the viscosity of CSO affected negatively the treatability and leachability of wood blocks. Decay resistance, which was evaluated by the weight loss of wood blocks exposed against Fomitopsis palustris (FOP) and Trametes versicolor, of the CSO-treated/leached wood blocks was superior to that of control. Especially, most of wood blocks treated with preserving solution composed of only CSO (CSO-2) did not decayed and showed a very low weight loss against FOP. The decay resistance results from CSO retained in wood blocks after leaching. The retention of CSO could identify using the observation of X-ray microscope. Length of wood strips, which were treated with CSO-2 and then immersed in saline water for 2 weeks, hardly changed in all cutting directions. In addition, weight gain and length-swelling rate of the wood strips were extremely low compared to those of control. These results indicate that moisture resistance of the wood strips was improved by the CSO treatment. It is concluded that the treatment of CSO using a vacuum-pressure method provides the decay resistance and dimensional stability of wood, and thus CSO can be used as a natural wood preservative on various indoor and outdoor circumstances.

• Journal of agriculture & life science
• /
• v.50 no.3
• /
• pp.1-11
• /
• 2016

With increasing interest, there have been studies on LiDAR(Light Detection And Ranging)-based DEM(Digital Elevation Model) to acquire three dimensional topographic information. For producing LiDAR DEM with better accuracy, Filtering process is crucial, where only surface reflected LiDAR points are left to construct DEM while non-surface reflected LiDAR points need to be removed from the raw LiDAR data. In particular, the changes of input values for filtering algorithm-constructing parameters are supposed to produce different products. Therefore, this study is aimed to contribute to better understanding the effects of the changes of the levels of GroundFilter Algrothm's Mean parameter(GFmn) embedded in FUSION software on the accuracy of the LiDAR DEM products, using LiDAR data collected for Hwacheon, Yangju, Gyeongsan and Jangheung watershed experimental area. The effect of GFmn level changes on the products' accuracy is estimated by measuring and comparing the residuals between the elevations at the same locations of a field and different GFmn level-produced LiDAR DEM sample points. In order to test whether there are any differences among the five GFmn levels; 1, 3, 5, 7 and 9, One-way ANOVA is conducted. In result of One-way ANOVA test, it is found that the change in GFmn level significantly affects the accuracy (F-value: 4.915, p<0.01). After finding significance of the GFmn level effect, Tukey HSD test is also conducted as a Post hoc test for grouping levels by the significant differences. In result, GFmn levels are divided into two subsets ('7, 5, 9, 3' vs. '1'). From the observation of the residuals of each individual level, it is possible to say that LiDAR DEM is generated most accurately when GFmn is given as 7. Through this study, the most desirable parameter value can be suggested to produce filtered LiDAR DEM data which can provide the most accurate elevation information.

• The Journal of KAIRB
• /
• v.2 no.1
• /
• pp.23-31
• /
• 2020

Purpose: To obtain opinions from Korean Institutional Review Board (IRB) members' self-evaluation on ability to conduct fairness review of clinical trial protocol with presence of conflict of interest and from investigators and IRB members on financial conflict of interest through surveying. Methods: IRB members and researchers in 9 different hospitals were asked to answer survey questions via email. Results: Responders were 115 personnel (IRB Chair/vice 18, medical member 30, non-medical member 28, and researcher 39) from 9 centers. Compared to IRB medical members, IRB chair/vice respondents scored higher with statistically significance on 10 point scale (8.44±1.381 vs. 7.30±1.685, p=0.005) when asked to self-evaluate fairness reviewing a protocol proposed by an investigator from the same department and a protocol from the company that supports the scientific committee of responders. When reviewing a protocol proposed by a hospital director, non-medical members scored statistically significantly higher than medical-members (7.47±1.76 vs. 8.07±2.70, p=0.034). When asked about the limitation of labor fee for principal investigator on phase 3 Human clinical trials of the Investigational new drug, while the responses range was wide, 60% answered that labor cost of principal investigator should be less than 30% of total budget for clinical trials with a budget of 100 million won. 51.3% answered that there is no need to disclose the labor cost of the principal investigator in the consent form. Since every investigator can be influenced unconsciously by conflict of interest, the answer that 'responder agrees that there is need for management' was the most chosen answer (IRB member 61.8%, investigator 64.1%, multiple answers allowed). Conclusion: Considering scores on questions of fairness by IRB members were between 7.23-8.56 on scale of 0 to 10 point when IRB members were asked about reviewing a clinical trial protocol, it cannot be said with absolute certainty that there is no issue regarding fairness in the review process. Therefore, there should be more ways to safeguard fairness for these issues. There is a need that the disclosure amount of honorarium from sponsor should be lower than 100 million Korean won. Considering the results of the survey in which respondents expressed their thoughts, it is likely that more education on the concept of conflict of interest is needed.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.27 no.2
• /
• pp.17-24
• /
• 2023

A post-processing technique for the measurement signal of a solenoid-type sensor is introduced. The solenoid-type sensor nondestructively evaluates an external tendon of prestressed concrete using the total flux leakage (TFL) method. The TFL solenoid sensor consists of primary and secondary coils. AC electricity, with the shape of a sinusoidal function, is input in the primary coil. The signal proportional to the differential of the input is induced in the secondary coil. Because the amplitude of the induced signal is proportional to the cross-sectional area of the tendon, sectional loss of the tendon caused by ruptures or corrosion can be identified by the induced signal. Therefore, it is important to extract amplitude information from the measurement signal of the TFL sensor. Previously, the amplitude was extracted using local maxima, which is the simplest way to obtain amplitude information. However, because the sampling rate is dramatically decreased by amplitude extraction using the local maxima, the previous method places many restrictions on the direction of TFL sensor development, such as applying additional signal processing and/or artificial intelligence. Meanwhile, the proposed method uses amplitude demodulation to obtain the signal amplitude from the TFL sensor, and the sampling rate of the amplitude information is same to the raw TFL sensor data. The proposed method using amplitude demodulation provides ample freedom for development by eliminating restrictions on the first coil input frequency of the TFL sensor and the speed of applying the sensor to external tension. It also maintains a high measurement sampling rate, providing advantages for utilizing additional signal processing or artificial intelligence. The proposed method was validated through experiments, and the advantages were verified through comparison with the previous method. For example, in this study the amplitudes extracted by amplitude demodulation provided a sampling rate 100 times greater than those of the previous method. There may be differences depending on the given situation and specific equipment settings; however, in most cases, extracting amplitude information using amplitude demodulation yields more satisfactory results than previous methods.

• 한국노년학
• /
• v.32 no.2
• /
• pp.431-446
• /
• 2012

The objective of this study is to introduce the theory of Gerotranscendence and the ninth stage of Erikson & Erikson(1997)'s psycho-social development theory in order to enable the academic Korean field to have a more positive and fresher point of view on aging. In order to meet this objective, this study will first take a look at Erikson's 9th stage expansion theory on human development. Then we will study Gerotranscendence as the most representing phenomena among the 9 stage theory so that the Korean Gerontology field can utilize it for future plans. The definition of Gerotranscendence was first introduced by Tornstam(1994) and has been applied as Erikson & Erikson's 9 stage theory ever since. Gerotranscendence can be described as an individual that has entered his golden years after middle age, which transforms one's point of view on life from a materialistic and logical one to a more universal and transcending one. Gerotranscendence is a voluntary and overcoming process of oneself that is displayed in many seniors which leads to a lesser focus on oneself in the eyes of the society, but increases the inter-relational bonding between past and future generations. The following is a summary of the theorhetical evaluation on Gerotranscendence which was analyzed in this study. First, this study introduces the Gerotranscendence theory, which is recognized as the most representative phenomena among Erikson's 9th stage theory that has hence expanded the application of Gerontology theories in the academic field of Gerontology. Second, this study has provided a new point of view towards the elderly in the practical field of senior citizen social welfare. With this understanding, practical levels of services from various points of view can be provided to acknowledge the needs of the elderly. Third, a much wider field of research can be exchanged and provided along with other fields of studies by applying and extending this Gerotranscendence theory in Korea. It would also be especially beneficial to exchange researches within related fields of study such as psychology, sociology, nursing science, family science and the study of religion. Not to mention also lending support to hospitals for the elderly(nursing homes) and institutions related to senior welfare, or practical fields where there is an active exchange of research using Gerotranscendence theory.