• Journal of the Korean Society of Safety
• /
• v.11 no.2
• /
• pp.52-59
• /
• 1996

This paper presents a new approach for assessing the dynamic reliability in a complex system such as a nuclear power plant. The method is applied to a dynamic analysis of the potential accident sequences which may occur during mid-loop operation. Mid-loop operation is defined as an operation to make RCS water level below the top of the flow area of the hot legs at the junction with the reactor vessel for repairs and maintenance of steam generators and reactor coolant pumps for a specific time. The Idea behind this approach consists of both the use of the concept of the performance achievement/requirement correlation and of a dynamic event tree generation method. The assessment of the system reliability depends on the determination of both the required performance distribution and the achieved performance distribution. The quantified correlation between requirement and achievement represents a comparison between two competing variables. It is demonstrated that this method is easily applicable and flexible in that it can be applied to any kind of dynamic reliability problem.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.12
• /
• pp.2135-2142
• /
• 2010

This paper studies the validity about a joint operation of neutral wire and overhead grounding wire in combined distribution systems. The overhead grounding wire and neutral wire are currently installed separately and grounded by common. However there is no any ineffectiveness or electrical problem in case of the proposed system, such system can be operated at real distribution system. Therefore this paper describes the suitability of a joint operation through lightning surge analysis on combined distribution systems. Lightning surge analysis is carried out by EMTP/ATPDraw to obtain the overvoltage of overhead line and underground cable in various conditions such as locations and current types of lightning stroke. Overvoltage gained by the analysis show that the insulation strength of the joint operation case is not stable compare with the current operation case.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.535-536
• /
• 2011

This paper studies the validity about a joint operation of neutral wire and overhead grounding wire in combined distribution systems. The overhead grounding wire and neutral wire are currently installed separately and grounded by common. However there is no any ineffectiveness or electrical problem in case of the proposed system, such system can be operated at real distribution system. Therefore this paper describes the suitability of a joint operation through lightning surge analysis on combined distribution systems and analyzes the optimal position of lightning arrester on joint operation of neutral wire and overhead grounding wire. Lightning surge analysis is carried out by EMTP/ATPDraw to obtain the overvoltage of overhead line and underground cable in various conditions such as location and current types of lightning stroke. Over voltage gained by the analysis show that the insulation strength of the joint operation case is not stable compare with the current operation case.

• Journal of Distribution Science
• /
• v.14 no.2
• /
• pp.41-45
• /
• 2016

Purpose - Finding an optimal path is an essential component for the design and operation of smart transportation or logistics network. Many applications in navigation system assume that travel time of each link is fixed and same. However, in practice, the travel time of each link changes over time. In this paper, we introduce a new transportation problem to find a latest departing time and delivery path between the two nodes, while not violating the appointed time at the destination node. Research design, data, and methodology - To solve the problem, we suggest a mathematical model based on network optimization theory and a backward search method to find an optimal solution. Results - First, we introduce a dynamic transportation problem which is different with traditional shortest path or minimum cost path. Second, we propose an algorithm solution based on backward search to solve the problem in a large-sized network. Conclusions - We proposed a new transportation problem which is different with traditional shortest path or minimum cost path. We analyzed the problem under the conditions that travel time is changing, and proposed an algorithm to solve them. Extending our models for visiting two or more destinations is one of the further research topics.

• Journal of Practical Engineering Education
• /
• v.10 no.1
• /
• pp.35-39
• /
• 2018

More and more universities are enforcing SW education for non-major undergraduates. However, they are experiencing difficulties in educating non-major students to understand computational thinking processes. In this paper, we did not use the mathematical operation problem to solve this problem. And we proposed a basic problem-solving process teaching method based on computational thinking using simple physical devices. In the proposed educational method, we teach a LED circuit using an Arduino board as an example. And it explains the problem-solving process with computational thinking. Through this, students learn core computational thinking processes such as abstraction, problem decomposition, pattern recognition and algorithms. By applying the proposed methodology, students can gain the concept and necessity of computational thinking processes without difficulty in understanding and analyzing the given problem.

• Educational Technology International
• /
• v.11 no.1
• /
• pp.145-169
• /
• 2010

Many universities are searching for educational methods to cultivate problem-solving ability and cooperative learning ability or already trying to implement them. Problem Based Learning(PBL) and Action Learning(AL) are effective teaching and learning methods to cultivate men of talent qualified for problem-solving and cooperative learning abilities that universities are seeking after. PBL and AL have something in common in that learning is accomplished while learners are solving the authentic problem. But, in spite of this similarity, PBL and AL have differences. However, most literatures and cases on these two models introduce only the outline of commons and differences and do not provide teachers with actual helping aids to select a model appropriate for the actual design or operation of classes. Accordingly, many teachers usually select and utilize a familiar model rather than select a proper model to the nature of a subject and the educational goal. Teaching and learning methods or learning environment should be selected appropriately to the educational goal. This study indicates the characteristics of PBL and AL that are being introduced and utilized as a principal teaching and learning method of college education and then shows how this method can be realized in the university by comparing the cases of classes applied in two methods.

• Journal of the Korean Professional Engineers Association
• /
• v.42 no.4
• /
• pp.40-44
• /
• 2009

The analysis of air quality model applied for EIA in Korea indicates that ISCST3 and CALINE3 dominate the model, and it causes the problem that regional and business characteristics are not taken into account. To solve this problem, it appears necessary to build guideline of the air quality model operation. First of all, to implement the above plan we need to categorize the site into simple and complex terrain, coast to consider regional characteristics, and the sources of pollutants into point/area/line as well. To make the procedure more efficient with reduced time and less cost, we are to apply screening model for prelimninary work of the suggested model.

• Proceedings of the KIEE Conference
• /
• 2001.05a
• /
• pp.166-168
• /
• 2001

Generation by the privately owned generators, which are normally operated has occupied about 10% of total generation. Recently the small co-generation employed gas engine has been introduced and attracted public interest. For privately owned generator to be paralleled Utilities, a customer complies with Generator Parallel Operation Guideline set by Utilities and installs related protective relays. But the guideline is not specified to small co-generation, only provides parallel operation of privately owned generator. So applying this guideline, initial investment can be too high comparing to total co-generation cost. Besides there is no specified guide about ALTS, which arises asynchronous problem. In this paper we analyzed guideline and technical problem when small co-generation is paralleled. And additionally needed researching area to improve distribution of small co-generation is discussed.

• Journal of Fisheries and Marine Sciences Education
• /
• v.26 no.2
• /
• pp.444-454
• /
• 2014

The range of optimization problem in aquaculture is very wide, resulting from the range of species, mode of operation. Quite a few studies focus marine net-cages, but studies on land based culture farm are few or no. This paper considers a allocation problem to meet production planning in land based aquaculture system. A water pool allocation model in land based aquaculture system was developed. The solution finds the value of decision variable to minimize yearly production costs that sums up the water pool usage cost and sorting cost. The model inputs were (1) the fish growth rate (2) critical standing corp (3) number of water pool (4) number of fish. The model outputs were (5) number of water pool in growing phase (6) cost of cultivation (6) optimal facility allocation(number of water pool for each growing phase). To solve the problem, an efficient heuristic algorithm based on a greedy manner is developed. Branch and bound and heuristic is evaluated through numerical examples.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2003.11a
• /
• pp.81-84
• /
• 2003

The ability to determine the optimal frequencies and offsets for independent and unrestricted ordering cycles for multiple items can be very valuable for managing storage capacity constrained facilities in a supply chain. The complexity of this problem has resulted in researchers focusing on more tractable surrogate problems that are special cases of the base problem. Murthy et al. (European Journal of Operation Research 2003) developed insights leading to solution of the original problem and present a heuristic for offsetting independent and unrestricted ordering cycles for items to minimize their joint storage requirements. However, their study cannot find optimal solution due to the Greedy Heuristic solution procedure. In this paper, we present a complete procedure to find the optimal solution for the model with a integer programming optimization approach and genetic algorithm. Numerical examples are included to compare each model with that of Murthy et at. Research of this type may prove useful in solving the more general problem of selecting order policies to minimize combined holding, ordering, and storage costs.