• Title/Summary/Keyword: problem analysis

Search Result 16,365, Processing Time 0.053 seconds

Republic of Korea Entrepreneurship Ecosystem Status and Recognition Research: Focusing on Entrepreneurs, Entrepreneurs Preliminary, Student Centered Comparative Analysis on the Status and Recognition (대한민국 창업생태계 현황 및 인식 연구: 창업가, 예비창업가, 학생을 중심으로 현황 및 인식 비교 분석)

  • Kim, Sung Hoon;Nam, Jung min
    • Asia-Pacific Journal of Business Venturing and Entrepreneurship
    • /
    • v.11 no.6
    • /
    • pp.175-183
    • /
    • 2016
  • The government set up "national happiness, the hope of a new era of national vision under' job center of the creative economy" to achieve by national goals in the first and figure achieved through the establishment of new growth engines of the youth unemployment problem solve and national level there are a number of business start-up support. September 8, 2015 announced the Government's look at the '2016 Year of the budget, the government for new growth engines greatly promoted the venture entrepreneurship ecosystem revitalization and research and development (R & D) the business for enhanced performance in 2017. According to the direction of this study is to evaluate the current creative economy business incubator at the comparison whether the correct orientation mainly entrepreneurs, entrepreneurs preliminary recognition of student entrepreneurship ecosystem. Entrepreneurs 113 people in that way, 71 people pre-entrepreneurs, students 60, workers were founding agencies conducted an online survey of 47 people, 16 people Investors, 50 public and 11 additional persons including a total of 368 people. This study is in line with the orientation of these entrepreneurs to create economic status and recognition of the Republic of Korea entrepreneurship ecosystem, pre- entrepreneurs, students will examine the comparative analysis around. Analysis, social perception of entrepreneurship is somewhat higher than it was confirmed that the negative response of 32.2% to 36.3% of positive response. Social awareness of entrepreneurs showed a 2-fold higher response rate than the negative of response of 17.1% to 41.7% responding that positive recognition for the current start-up environment is bad, the response is good response to higher response rate than 23.5% to 41.1% It showed. The percentage of responses that better respect the entrepreneurship environment of the future Republic of Korea showed a higher response rate than the rate of 23% in response to deteriorate to 41.2%, with 52.9% awareness is the percentage that responded that the bad part about the ruthless Korea's entrepreneurship environment in China good part as response rate approximately three times greater than the 17.7% showed high response rates. Social awareness of entrepreneurs experience the presence of the founding start-up experience was confirmed that the more negative the number increases, the more the contrary the number of start-up experience increased awareness of the current and future environment of entrepreneurship was identified as a positive entrepreneurship environment. Also recognized was confirmed to change the parent of the more positive changes in the start-up of entrepreneurs doctor also positive about entrepreneurship, start-up entrepreneurs start with a doctor's motivation for founding non-economic reasons than for economic reasons has confirmed Higher. This study showed the overall level overview analysis of the status and recognition of the Republic of Korea entrepreneurship ecosystem. Future studies need to be a proposal for an existing previous studies for more precise direction to go forth to analyze the entrepreneurship ecosystem with a focus on problems and improvement of the Republic of Korea entrepreneurship ecosystem.

  • PDF

Development of Bicycle Accident Prediction Model and Suggestion of Countermeasures on Bicycle Accidents (자전거 사고예측모형 개발 및 개선방안 제시에 관한 연구)

  • Kwon, Sung-Dae;Kim, Yoon-Mi;Kim, Jae-Gon;Ha, Tae-Jun
    • KSCE Journal of Civil and Environmental Engineering Research
    • /
    • v.35 no.5
    • /
    • pp.1135-1146
    • /
    • 2015
  • This thesis aims to improve the safety of bicycle traffic for activating the use of bicycle, main means of non-powered and non-carbon transportation in order to cope with worldwide crisis such as climate change and energy depletion and to implement sustainable traffic system. In this regard, I analyzed the problem of bicycle roads currently installed and operated, and developed the bicycle accident forecasting model. Following are the processes for this. First, this study presented the current status of bicycle road in Korea as well as accident data, collect the data on bicycle traffic accidents generated throughout the country for recent 3 years (2009~2011) and analyzed the features of bicycle traffic accidents based on the data. Second, this study selected the variable affecting the number of bicycle accidents through accident feature analysis of bicycle accidents at Jeollanam-do, and developed accident forecast model using the multiple regression analysis of 'SPSS Statistics 21'. At this time, the number of accidents due to extension per road types (crossing, crosswalk, other single road) was used. To verify the accident forecast model deduced, this study used the data on bicycle accident generated in Gwangju, 2011, and compared the prediction value with actual number of accidents. As a result, it was found out that reliability of accident forecast model was secured through reconciling with actual number of cases except certain data. Third, this study carried out field survey on the bicycle road as well as questionnaire on satisfaction of bicycle road and use of bicycle for analysis of bicycle road problems, and presented safety improvement measures for the problems deduced as well as bicycle activation plans. This study is considered to serve as the fundamental data for planning and reorganizing of bicycle road in the future, and expected to improve safety of bicycle users and to promote activation of bicycle use as the means of transportation.

The Effect of Social Network on Information Sharing in Franchise System (프랜차이즈시스템의 사회연결망 특성이 정보공유에 미치는 영향)

  • Yun, Han-Sung;Bae, Sang-Wook;Noh, Jung-Koo
    • Journal of Distribution Research
    • /
    • v.16 no.2
    • /
    • pp.95-118
    • /
    • 2011
  • The purpose of this study is as follows. First, we investigate empirically the effects of social network properties such as social network density and centrality of a franchisee on its information sharing with various subjects such as the franchisor and other franchisees in the franchise system. Second, we examine exploratively if tie strength between a franchisee and its franchisor plays a moderating role on the relationship between social network properties and information sharing. The study model was established as shown in

    . We gathered 200 data from franchisees in Busan through a questionnaire survey and used 189 data for our purpose. To improve the quality of data, we selected respondents from the franchisees' owners or managers that had contacted often with their franchisor and other franchisees in the franchise system. Our data analysis began with reliability analysis, exploratory and confirmatory factor analysis, on the multi-item measures of social network density, social network centrality, tie strength, information sharing and control variables such as shared goals and ownership to assess the reliability and validity of those measures. The results were shown that the presented values satisfied the general criteria for reliability and validity. We tested our hypotheses using a hierarchical multiple regression analysis in four steps. Model 1 regressed the dependent variable(information sharing) only on control variables(shared goals, ownership). Model 2 added main effect variables(social network density, social network centrality) in Model 1. Model 3 added a moderating variable(tie strength) in Model 2. Finally, Model 4 added interaction terms between the main variables and the moderating variable in Model 3. We used a mean-centering method for the main variables and the moderating variable to minimize the multicollinearity problem due to the interaction terms in Model 4. Two important empirical findings emerge from this study. In other words, the effects of social network properties and tie strength on a franchisee's information sharing depend on subject types such as the franchisor and other franchisees in franchise system. First, social network centrality, tie strength, the interaction between social network density and tie strength and the interaction between social network centrality and tie strength all affect significantly a franchisee's information sharing with its franchisor. By the way, the interaction between social network centrality and tie strength has a negative effect on its information sharing while the interaction of social network density and tie strength has a positive effect on its information sharing. Second, both social network centrality affects significantly and directly a franchisee's information sharing with other franchisees in the franchise system. However, there does not exist the moderating role of tie strength in the second case. Finally, we suggest the implications of our findings and some avenues for future research.

  • PDF

ROC Analysis of Visual Assessments Made in Gated Blood Pool Scans of Patients with Coronary Artery Disease (관상동맥질환에서 심장풀 스캔의 육안적 평가에 대한 ROC 분석)

  • Lee, Kyun-Han;Choi, Yoon-Ho;Lee, Bum-Woo;Moon, Dae-Hyuk;Koong, Sung-Soo;Chung, June-Key;Lee, Myung-Chul;Koh, Chang-Soon
    • The Korean Journal of Nuclear Medicine
    • /
    • v.23 no.2
    • /
    • pp.175-181
    • /
    • 1989
  • Visual assessment of regional wall motion abnormality (RWMA) by gated blood pol scan (GBPS) serves as an useful parameter in the diagnosis, functional evaluation, and follow up in various clinical settings, but are still subject to some inherent limitations. On important problem may be the interobserver as well as intraobsever variation that may well be present due to the subjective nature of the interpretations. This study was carried out to determine the reliability and reproducibility of visual assessments made in GBPSs, and to observe the degree to which the results would be influenced by observer variation. Fifty two patients with coronary heart disease had resting GBPS and contrast ventriculography within 4 days appall. Contrast ventriculography-showed normal wall motion in 6 patients and the remaining 46 had RWMA in one or more segments. The anterior and left anterolateral views of all 52 GBPSs were analyzed by three independent observers, who selected from 5 scales, their level of confidence that there was RWMA in that segment. Reciever operating characteristic (ROC) curves for each analysis was plotted and the area under the curve $(\theta)$ was used as a parameter representing each observer's performance in his interpretations. The findings of contrast ventriculographies were used as the standard for RWMA. The apical and inferoapical segments showed the best correlation with contrast ventriculography ($\theta=0.90-0.94$, 0.81-0.94, respectively), and the inferior wall showed the poorest correlation $(\theta=0.70-0.74)$. The interpretations of the inferior, septal, apical, and posteroinferior, segments showed no difference between the observers, but there was significantly better performance in assessment by observer A compared to that by B or C for the anterolateral segments ($\theta=0.87$, 0.78, 0.76, respectively. p<0.01 for A vs B, p<0.05 for A vs C), as well as when all segments were considered altogether ($\theta=0.88$, 0.83, 0.82, respectively. both p<0.05). This was also true for the infero-apical segment between A and C ($\theta=0.09$, 0.81, p<0.05). The intraobserver variation, however, did not appear significant, with only the inferior segment for observer B showing any significant difference when observer A and B repeated the analysis 10 days latter. There was no difference in assessing dyskinesia, with all observers showing a high performance ($\theta=0.98$, 0.87, 0.97, respectively). The visual assessment of left ventricular ejection fraction by all three observers correlated well with the calculated value from a semiautomated method (Spearman's r = 0.91, 0.83, 0.83. p<0.01, p<0.05, p < 0.05). The assessment of LV and RV size also correlated well between the three observers (Kendall's w = 0.80, 0.51, p<0.01 for both left and right ventricles). The above findings suggest that RWMA visually assessed by GBPS correlates well with that done by contrast ventriculography. And although the observer's experience or skill may influence the results in certain segments, visual analysis of GBPS may serve as a reliable and reproducible means for evaluating ventricular function.

  • PDF

Improvement of Rotary Tine for Barley Seeder Attached to Rotary Tiller (로우터리 맥류파종기 경운날의 개량시험)

  • 김성래;김문규;김기대;허윤근
    • Journal of Biosystems Engineering
    • /
    • v.4 no.1
    • /
    • pp.1-23
    • /
    • 1979
  • The use of barley seeder attached to rotary tiller in the rural area has a significant meaning not only for the solution of labor peak season, but also for the increase of land utilization efficiency. The facts that presently being used barley seeders are all based on the mechanical principles of the reverse rotation, center drive and are all using forward rotating tine, which is used to be easily and heavily worn out when it rotates reversely, raise problem of recommending them to rural area in Korea. Therefore, the main objective of the study was to develop new type of rotary tine attachable to barley seeders. To attain the objective the following approaches were applied. (1) The kinematic analysis of reverse rotating barley seeders. (2) The studies on the soil bin and artificial soil. (3) The comparative experiment on the power requirement of prototype tine. The results obtained from the studies are summarized as follow: 1. The kinematic analysis of barley seeder attached to rotary tiller: The following results were obtained from the kinematic analysis for deriving general formulae of the motion and velocity characterizing the rotary tine of barley seeders presently being used by farmers. a) The position vector (P) of edge point (P) in the rotary tine of reverse rotating, center drive was obtained by the following formula. $$P=(vt+Rcos wt)i+Rsin wt j+ \{ Rcos \theta r sin \alpha cos (wt- \beta +\theta r) +Rsin \theta r sin \alpha sin (wt-\beta + \theta r) \} lk $$ b) The velocity of edge point $(P^')$ of reverse rotating, center drive rotary tine was obtained by the following formula. $$(P^')=(V-wR sin wt)i+(w\cdot Rcoswt)j + \{ -w\cdot Rcos \theta r\cdot sin \alpha \cdot sin (wt-\beta +\theta r) + w\cdot Rsin \theta r\cdot sin \alpha \cdot cos (wt- \beta + \theta r \} k $$ c) In order to reduce the power requirement of rotary tine, the angle between holder and edge point was desired to be reduced. d) In order to reduce the power requirement, the edge point of rotary tine should be moved from the angle at the begining of cutting to center line of machine, and the additional cutting width should be also reduced. 2. The studies on the soil bin and artificial soil: In order to measure the power requirement of various cutting tines under the same physical condition of soil, the indoor experiments Viere conducted by filling soil bin with artificially made soil similar to the common paddy soil and the results were as follows: a) When the rolling frequencies$(x)$ of the artificial soil were increased, the densIty$(Y)$ was also increased as follows: $$y=1.073200 +0.070780x - 0.002263x^2 (g/cm^3)$$ b) The absolute hardness $(Y)$ of soil had following relationship with the rolling frequencies$(x)$ and were increased as the rolling frequencies were increased. $$Y=37.74 - \frac {0.64 + 0.17x-0. 0054x^2} {(3.36-0.17x + 0.0054x^2)^3} (kg/cm^3)$$ c) The density of soil had significant effect on the cohesion and angle of internal friction of soil. For instance, the soil with density of 1.6 to 1.75 had equivalent density of sandy loam soil with 29.5% of natural soil moisture content. d) The coefficient of kinetiic friction of iron plate on artificial soil was 0.31 to 0.41 and was comparable with that of the natural soil. e) When the pulling speed of soil bin was the 2nd forward speed of power tiller, the rpm of driving shaft of rotary was similar to that of power tiller, soil bin apparatus is indicating the good indoor tester. 3. The comparative experiment on the power requirement of prototype tine of reverse rotating rotary: According to the preliminary test of rotary tine developed with various degrees of angle between holder and edge pcint due to the kinematic analysis, comparative test between prototype rotary tine with $30 ^\circ $ and $10 ^\circ$ of it and presently being used rotary tine was carried out 2nd the results were as follows: a) The total cutting torque was low when the angle between holder and edge point was reduced. b) $\theta r$ (angle between holder and edge point) of rotary tine seemed to be one: of the factors maximizing the increase of torque. c) As the angle between holder and edge point ($\theta r$) of rotary tine was $30 ^\circ $ rather than $45 ^\circ $, the angle of rotation during cutting soil was reduced and the total cutting torque was accordingly reduced about 10%, and the reduction efficiency of total cutting torque was low when the angle between holder and edge point ($\theta r$) of rotary tine was $10 ^\circ $, which indicates that the proper angle between holder and edge point of rotary tine should be larger than $10 ^\circ $ and smaller than $30 ^\circ $ . From above results, it could be concluded that the use of the prototype rotary tine which reduced the angle between holder and edge point to $30 ^\circ $, insted of $45 ^\circ $, is disirable not only decreasing the power requirements, but also increasing the durabie hour of it. Also forward researches are needed, WIlich determine the optimum tilted angle of rotary brocket, and rearrangement of the rotary tine on the rotary boss.

  • PDF

The Associated Factors with Xerostomia in Patients with Systemic Diseases (일부 전신질환자에서 구강건조증의 관련요인 분석)

  • Kim, Sun-Ju;Choi, Jun-Seon
    • Journal of dental hygiene science
    • /
    • v.13 no.4
    • /
    • pp.386-392
    • /
    • 2013
  • The purpose of this study was to evaluate the factors related to xerostomia in patients with systemic diseases, and the results were analyzed through t-test, ANOVA, and multiple linear regression analysis. There were 62 respondents (56.9%) who reported dry mouth and the season of the most severe dry mouth was reported to be the highest during winter. According to the analysis made in the relationship of xerostomia with the awareness of general health and health behavior, the group that understood their own health poorly, had more than two kinds of diseases, and had been administered more than two kinds of daily medication showed higher xerostomia. Also, those who experienced desperation, had high dryness in other parts of the body, and heavy snoring were more aware of xerostomia (p<0.05). According to the analysis made in the relationship between xerostomia and awareness of oral health state, the group that understood their oral health poorly and had pain in the oral mucous membrane and halitosis was more aware of xerostomia (p<0.05). According to the analysis made in the relationship between quality of life and xerostomia, the group that showed high level of problem in daily living and stress and were self-conscious and felt tense due to halitosis reported more xerostomia (p<0.05). Finally, xerostomia was most correlated with consciousness of the eyes of others due to halitosis followed by the number of transferred systemic diseases and stress level. Based on such results, xerostomia was understood to be an obstacle in maintaining favorable social life and health. Since xerostomia was shown to be related to the number of transferred systemic diseases, the dental professions are asked to further improve their understanding not only on oral health but also systemic diseases. Therefore, these efforts are expected to prevent xerostomia and reduce various complications caused by xerostomia.

A Study on Comparative Analysis of Socio-economic Impact Assessment Methods on Climate Change and Necessity of Application for Water Management (기후변화 대응을 위한 발전소 온배수 활용 양식업 경제성 분석)

  • Lee, Sangsin;Kim, Shang Moon;Um, Gi Jeung
    • Journal of Korean Society of societal Security
    • /
    • v.4 no.2
    • /
    • pp.73-78
    • /
    • 2011
  • In order to resolve the problem of change in global climate which is worsening as days go by and to preemptively cope with strengthened restriction on carbon emission, the government enacted 'Framework Act on Low Carbon Green Growth' in 2010 and selected green technology and green industry as new national growth engines. For this reason, the necessity to use the un-utilized waste heat across the whole industrial system has become an issue, and studies on and applications of recycling in the agricultural and fishery fields such as cultivation of tropical crops and flatfishes by utilizing the waste heat and thermal effluent generated by large industrial complexes including power plants are being actively carried out. In this study, we looked into the domestic and overseas examples of having utilized waste heat abandoned in the form of power plant thermal effluent, and carried out economic efficiency evaluation of sturgeon aquaculture utilizing thermal effluent of Yeongwol LNG Combined Cycle Power Plant in Gangwon-do. In this analysis, we analyzed the economic efficiency of a model business plan divided into three steps, starting from a small scale in order to minimize the investment risk and financial burden, which is then gradually expanded. The business operation period was assumed to be 10 years (2012~2021), and the NVP (Net Present Value) and economic efficiency (B/C) for the operation period (10 years) were estimated for different loan size by dividing the size of external loan by stage into 80% and 40% based on the basic statistics secured through a site survey. Through the result of analysis, we can see that reducing the size of the external loan is an important factor in securing greater economic efficiency as, while the B/C is 1.79 in the case the external loan is 80% of the total investment, it is presumed to be improved to 1.81 when the loan is 40%. As the findings of this study showed that the economic efficiency of sturgeon aquaculture utilizing thermal effluent of power plant can be secured, it is presumed that regional development project items with high added value can be derived though this, and, in addition, this study will greatly contribute to reinforcement of the capability of local governments to cope with climate change.

  • PDF

A Study on the Origin and Transformation of Jeonju-Palkyung (전주팔경의 시원(始原)과 변용(變容)에 관한 연구)

  • Rho, Jae-Hyun;Son, Hee-Kyung;Shin, Sang-Sup;Choi, Jong-Hee
    • Journal of the Korean Institute of Traditional Landscape Architecture
    • /
    • v.33 no.3
    • /
    • pp.1-15
    • /
    • 2015
  • Based on the analysis and interpretation of the headwords and poetic words of a group of eleven collecting sceneries of Jeonju, the origin and transformations of the Jeonju-Palkyung(Eight sceneries of Jeonju) investigated by a time-series analysis are as follows. As there is no collection of landscape with a formal structure similar to that of the current Jeonju-Palkyung, prior to the Palkyung by Chujae(秋齋) Cho Soo-Sam(趙秀三, 1762~1849), there is no significant problem in assuming the eight poems in Chujaejib(秋齋集) are the origins of the Jeonju-Palkyung, and it is estimated to have been produced in 1829. In the late-19th century poem 'Wansanseunggyeong(完山勝景)', 'the Palkyung in Yeollyeo Chunhyang Sujeolga', and 'the Palkyung delivered by poet Shin Seokjeong in the Japanese colonial era', only the 'Dongpogwibeom(東浦歸帆)' changed from Dongjipo to Dongchon of Bongdong as for 'Landscape Setting There($L_{ST}$)' according to changes in district administration; despite this change, the fact that they are not too different from the Palkyung of Cho Soo-Sam, also supports this. Moreover, according to the headword concordance analysis, it is proven that the Jeonju-Palkyung was established in the late-19th century and continued to be the region's representative sceneries even during the Japanese colonial era, and later 'Namcheonpyomo(南川漂母)' and 'Gonjimangwol(坤止望月)' were added to expand to the Jeonju-Sipkyung(ten sceneries of Jeonju). But when we see there are famous spots that are the origins of the Jeonju-Sipkyung, including Gyeonggijeon, Geonjisan, Jogyeongdan, Omokdae, and Girinbong, Deokjinyeon, and Mangyeongdae, all of which have great representational significance as the capital of Jeolla Provincial Office as well as of the place of origin for Joseon Dynasty in the grouping of sceneries during the early Joseon Dynasty, including "Paehyangsipyeong (沛鄕十詠)", "Gyeondosipyeong (甄都十詠)", and "Binilheonsipyeong(賓日軒十詠)", the beginnings of the semantic Jeonju-Palkyung should be considered up to the first half of Joseon Dynasty. During this period, not only the fine sceneries with high retrospective merit as the capital of Hubaekje, like Gyeonhwondo(甄萱都), but also the sceneries like Mangyeongdae that reminds people of Jeong Mongju(鄭夢周) and Yi Seonggye(李成桂) in the late period of Goryeo appeared, elevating the status of Jeonju as the capital of Hubaekje and shortening the historical gaps as the place of origin of the Joseon Dynasty. The Jeonju-Palkyung is an organic item that carries the history of the Joseon Dynasty after Hubaekje and has gone through many cycles of disappearing and reappearing, but it has continued to change and transform as the region's representative sceneries. The Jeonju-Palkyung is a cultural genealogy that helps one understand the 'Jeonju Hanpunggyeong(韓風景: the sceneries of Korea in Jeonju)', and the efforts to preserve and pass it down to the next generation would be the responsibility of the people of Jeonju.

LONGEVITY AND FAILURE ANALYSIS OF FIXED RESTORATIONS SERVICED IN KOREA (국내에서 제작된 고정성 보철물의 수명과 실패 요인 및 양상)

  • Shin Woo-Jin;Jeon Young-Sik;Lee Keun-Woo;Lee Ho-Yong;Han Dong-Hoo
    • The Journal of Korean Academy of Prosthodontics
    • /
    • v.43 no.2
    • /
    • pp.158-175
    • /
    • 2005
  • Statement of problem. Every effort has been continually made to obtain objectivity in measuring the longevity of fixed restorations, such as by establishing unified judgement standard for deciding success and adopting statistical method that analyzes the data of successful and failed cases at the same time. In Korea, however desired level of development has not to be made in this field yet. Purpose. This study, adopting California Dental Association (CDA) quality evaluation system, established objective standard for deciding success, and inferred the longevity of fixed restorations and their failure analysis through adopting Kaplan-Meier survival analysis. Material and method. In order to assess the longevity of flxed restorations serviced in Korea and causes of failure, a total of 1109 individuals (aged 15-74, 716 women and 393 men loaded with 2551 unit fixed restorations, and 1934 abutments) who lived in Kyung-In Province were examined and the findings were as follows : Results. 1. Length of service of fixed restorations serviced in Korea was 6.86$\pm$0.15 yr (mean), 5.5 yr (median), and the rate of success was 65.82% in 5 year survival, and 21.15% in 10 year survival. 2. When there was patient's need for replacing old prosthetics, longevity of fixed restorations was 7.51$\pm$0.27 yr (mean), 7 yr (median), and the rate of success was 61.08% in 5 year survival, and 17.57% in 10 year survival. 3. Longevity of fixed restorations was longest in the over-sixty age group(9.21$\pm$0.66) and that of the teen age group(3.39$\pm$0.28) was shortest (p<0.05). 4. Longevity of fixed restorations of women (7.38$\pm$0.18 years) was longer than that of men (6.00$\pm$0.26) (p<0.05). 5. As for the provider factor (such as unlicensed performers, university hospitals, and private clinic), there was no statistically significant difference in longevity of fixed restorations. 6. Defective margin (34.78%). periodontal disease (12.15%), periapical involvement (11.73%), was the most frequent causes of failure and poor esthetics group showed the longest life above all (p<0.05). Actual frequent causes of failure after removing old prosthetics were defective margin, periapical involvement, periodontal disease and uncemented restoration. In 75.67% of the cases, abutment state after removing old prosthetics was good enough for loading another prosthetics. 7. There was found to have statistically significant influence between longevity of single crown (6.35$\pm$0.20 yr) and that of 3 unit fixed restorations (7.60$\pm$0.30 y) (p<0.05). In each case the most frequent cause of failure was defective margin. 8. The number of cantilever pontic, pontic/abutment ratio, oral hygiene status were found to have no statistically significant influence on longevity of fixed restorations in all groups (p>0.05). 9. Longevity of fixed restorations made of non precious metal was longest (9.60$\pm$0.40 yr) semi precious and precious trailing behind(p<0.05). 10. Group function group (37.04%) and partial group function group (44.62%) were predominant in frequency but showed no correlation between them and among different types of occlusal plane and different types of occlusal surface (p>0.05). 11. Longevity of fixed restorations was longest in the centric interference group(9.35$\pm$0.62) (p<0.05) among different types of occlusal interference. Conclusion. We found that longevity of fixed restorations serviced in Korea is affected by age, gender and type of material, and that most frequent cause of failure is defective margin. In order to assess the accurate longevity of axed restorations, unified research design. overcoming inter-observer difference and establishing the objective research items are needed. Furthermore, it is thought that prospective approach through thorough study and regular follow-ups is needed just from the start of research. Nationwide detailed studies on length of service of fixed restorations manufactured in Korea are hoped to be conducted hereafter.

Fatigue fracture of different dental implant system under cyclic loading (반복하중에 따른 수종 임플란트의 피로파절에 관한 연구)

  • Park, Won-Ju;Cho, In-Ho
    • The Journal of Korean Academy of Prosthodontics
    • /
    • v.47 no.4
    • /
    • pp.424-434
    • /
    • 2009
  • Statement of problem: Problems such as loosening and fractures of retained screws and fracture of implant fixture have been frequently reported in implant prosthesis. Purpose: Implant has weak mechanical properties against lateral loading compared to vertical occlusal loading, and therefore, stress analysis of implant fixture depending on its material and geometric features is needed. Material and methods: Total 28 of external hexed implants were divided into 7 of 4 groups; Group A (3i, FULL $OSSEOTITE^{(R)}$Implant), Group B (Nobelbiocare, $Br{\aa}nemark$ $System^{(R)}$Mk III Groovy RP), Group C (Neobiotec, $SinusQuick^{TM}$ EB), Group D (Osstem, US-II). The type III gold alloy prostheses were fabricated using adequate UCLA gold abutments. Fixture, abutment screw, and abutment were connected and cross-sectioned vertically. Hardness test was conducted using MXT-$\alpha$. For fatigue fracture test, with MTS 810, the specimens were loaded to the extent of 60-600 N until fracture occurred. The fracture pattern of abutment screw and fixture was observed under scanning electron microscope. A comparative study of stress distribution and fracture area of abutment screw and fixture was carried out through finite element analysis Results: 1. In Vicker's hardness test of abutment screw, the highest value was measured in group A and lowest value was measured in group D. 2. In all implant groups, implant fixture fractures occurred mainly at the 3-4th fixture thread valley where tensile stress was concentrated. When the fatigue life was compared, significant difference was found between the group A, B, C and D (P<.05). 3. The fracture patterns of group B and group D showed complex failure type, a fracture behavior including transverse and longitudinal failure patterns in both fixture and abutment screw. In Group A and C, however, the transverse failure of fixture was only observed. 4. The finite element analysis infers that a fatigue crack started at the fixture surface. Conclusion: The maximum tensile stress was found in the implant fixture at the level of cortical bone. The fatigue fracture occurred when the dead space of implant fixture coincides with jig surface where the maximum tensile stress was generated. To increase implant durability, prevention of surrounding bone resorption is important. However, if the bone resorption progresses to the level of dead space, the frequency of implant fracture would increase. Thus, proper management is needed.