• Journal of the Korean GEO-environmental Society
• /
• v.14 no.1
• /
• pp.15-22
• /
• 2013

5 each permeable and impermeable debris dams were selected to analyze the characteristics of dredging and sedimentation according to facility type in Inje, Gangwon. Field tests for the ground water table and sedimentation characteristics of the selected dams were performed. Furthermore, data of the dredging amount, storage capacity, and drainage area were analyzed for the 51 more debris control facilities. From the results of field tests, it was found that the storage capacity of impermeable debris dam could be not enough when the large debris flow is produced since sediments are accumulated even if large debris flow was not occurred. Drainage can be a problem since the ground water table of impermeable debris dam was reached to the surface of ground. However, it was found that the ground saturation should not occur at heavy rain since ground water table of permeable debris dam was located in lower part of buttress. Furthermore, from the analysis results of relation among the dredging amount, basin area, and capacity of debris control facility, it was found that size of debris control facility was not reflected by the basin area. Effective planning and construction should be accomplished for the future since the real sedimentation amount was not significant even though large debris dams were constructed.

• Journal of the Korean Geographical Society
• /
• v.31 no.2
• /
• pp.329-345
• /
• 1996

The purposes of this study are to review research trends of applied geography field, to retrospect geographical works done by Korean geographers in applied geography, and to prospect the future of applied geography. We are in the period where societal problems such as energy, transportation, pollution, environment, health care, and many others, require careful consideration and need throughout strategies for solution. Most societal problems have some geographical dimensions. Because these problems are geographic in nature, there is an obvious implication that geography as a discipline has something to offer in their solutions. In fact, most geographic problems are best presented and analyzed through the applications of geographic theories, concepts and tools. Applied geography is a branch of general geography. It relies on the scientific methods and uses the principles and methods of pure geography. However applied geography is different in that it analyzes and evaluates real world action and planning and seeks to implement and manipulate environmental and spatial realities. Thus, geographic theories and other social theories that have geographic dimensions are fundamental to applied geography. Applied geography has a short history as theme in Korean geography. During the last two decades. Korea achieved remarkable economic growth. We have also encountered widening regional disparity, housing shortage of larger cities, transportation congestion, environmental pollution and many other problems. Applied geographers have tried to analyze and solve such spatial problems during the last 30 years. The research trend of Korean applied geography can be subdivided into 5 categories: (1) land use analysis and efficient utilization, (2) national physical development and planning. (3) regional development and regional planning, (4) tourism and location-allocation, transportation planning. Still the overconcentration of Seoul metropolitan region and unbalanced regional development are perceived to be the serious spatial problems which may induce more works to solve these problems. In Korea new emphasis has to be given to some professional training and experimental learning, including methodology, field techniques data management, statistical analysis, cartography, GIS, and other tools, as applicable and beneficial to problem solving in real world. The growth of applied geography depends on new insights and purposed solutions of future applied geographers in Korea. Applied geographers will contribute to the creation of future Korean geographies.

• The Journal of Korean Academy of Prosthodontics
• /
• v.45 no.5
• /
• pp.644-652
• /
• 2007

Statement of problem: Resonance frequency analysis is evaluated as the non-invasive and objective method for the evaluation of implant stability and has been increasingly used. It is necessary to evaluate the factors affect the ISQ measurement stability. Purpose: This study was performed to evaluate the effect of the autoclave sterilization and reuse of $Smartpeg^{TM}$ on ISQ measurement. Material and methods: $SmartPeg^{TM}$ (Integration Diagnostics Ltd., $G\ddot{o}teborg$, Sweden) of autoclave group (A) was autoclave sterilized 9 times and $Smartpeg^{TM}$ of reuse group (R) was reused 9 times. Ten $SmartPeg^{TM}s$ were allocated to each group and after each autoclave sterilization and reuse, implant stability quotient (ISQ) values were measured 3 times from the two directions a and b at a right angle. $Osstell^{TM}$ mentor (Integration Diagnostics Ltd. $G\ddot{o}teborg$, Sweden) was used and type 1 (article no. 100353) $Smartpeg^{TM}$ was selected according to $Smartpeg^{TM}$ reference list. Osstem Implant US II future (Osstem Co., Seoul, Korea) in $4.0mm{\times}11.5mm$ was embedded in the self-curing acrylic resin ($Orthojet^{(R)}$, Lang Dental, U.S.A.). Data was statistically analyzed by one-way ANOVA $({\alpha}=.05)$ and scheffe test was done where a significant difference exist. Correlation test was also done between ISQ value and the number of autoclave sterilization or reuse. Results: 1. In autoclave group, the means and sd. of ISQ value before autoclave sterilization were $84.97{\pm}0.41,\;84.93{\pm}0.74$ at direction a and b. There was significant differences between autoclave groups at direction a and b (P=.000). 2. In reuse group, the means and sd. of ISQ value before reuse were $85.40{\pm}0.62,\;85.50{\pm}0.57$ at direction a and b. There was no significant difference between reuse groups at direction a and b (P>.05). 3. There was a weak positive correlation between the number of reuse and ISQ value at direction a and b (${\gamma}=.207$ and .246, P<.01). Conclusion: Within the limitations of this study, the following conclusions were drawn. Till ninth reuse of $Smartpeg^{TM}$, the ISQ measurement stability did not be affected. After twice autoclave sterilization of $Smartpeg^{TM}$ the ISQ measurement stability was affected.

• The Journal of Korean Academy of Prosthodontics
• /
• v.45 no.5
• /
• pp.611-620
• /
• 2007

Statement of problem: Second-generation indirect composite resins have been improved flexural strength, compressive strength, hydrolytic degradation resistance, wear resistance compared to first-generation indirect composite resins, but there are still some problems as hydrolysis and low wear resistance. Some manufacturers claim that wear resistance of their materials has been improved, but little independent study has been published on wear properties of these materials and the properties specified in the advertising materials are largely derived from in-house or contracted testing. Purpose: This study was to evaluate the wear of indirect composite resins (SR Adore, Sinfony, Tescera ATL) and gold alloy against the human enamel. Material and method: Extracted human incisors and premolars were sectioned to $2{\times}2{\times}2mm$ cube and embedded in the clear resin and formed conical shaped antagonist to fit the jig of pin-on-disk tribometer. Total 20 antagonists were stored in distilled water. Five disk samples, 24mm in diameter and 1.5mm thick, were made for each of three groups of indirect composite resins and gold alloy group, and polished to #2,000 SiC paper on auto-polishing machine. Disk specimens were tested for wear against enamel antagonists. Wear test were conducted in distilled water using a pin-on-disk tribometer under condition (sliding speed 200rpm contact load 24N, sliding distance 160m). The wear of the enamel was determined by weighing the enamel antagonist before and after test, and the weight was converted to volumes by average density. The wear tracks were analyzed by scanning electron microscopy and surface profilometer to elucidate the wear mechanisms. Statistical analysis of the enamel wear volume, wear track depth and wear tract width of disk specimens were accomplished with one-way ANOVA and the means were compared for significant differences with Scheffe's test. Results: 1. The enamel wear was most in gold alloy, but there were no statistically significant differences among all the groups (P>.05). 2. In indirect composite resin groups, the group to make the most shallow depth of wear tract was Sinfony, followed by Tescera ATL, SR Adoro (P<.05). Gold alloy was shallower than Sinfony, but there was no statistically significant difference between Sinfony and gold alloy (P>.05). 3. The width of wear tract of SR Adore was larger than the other groups (P<.05), and there were no statistically significant differences among the other groups (P>.05). 4. SEM analysis revealed that Sinfony and gold alloy showed less wear scars after test, Tescera ATL showed more wear scars and SR Adore showed the most. Conclusion: Within the limits of this study, Sinfony and gold alloy showed the least wear rates and showed similar wear patterns.

• The Journal of Korean Academy of Prosthodontics
• /
• v.45 no.5
• /
• pp.653-664
• /
• 2007

Statement of problem: The screw detorque value is a measure of the preload remaining in the screw just before detorquing. Purpose: This study evaluated the effect of different screw tightening sequences and tightening methods on detorque values for a well-fitting implant superstructure. Material and method: An implant superstructure that connected directly to four implants (Astra Tech) was fabricated on a fully edentulous mandibular acrylic resin model. Six well-fitting dental stone casts were made with a pickup impression of the superstructure from the acrylic resin model. To evaluate the effect of three screw tightening sequences (1-2-3-4, 2-4-3-1, and 2-3-1-4) and two tightening methods (2-step and 1-step) on the stability of screw joint, the detorque values for a well-fitting implant superstructure were measured twice after screw tightening using 20 Ncm. Detorque values were analyzed using multi-way analysis of variance and two-way analysis of variance at a .05 level of significance. Results: 1. The mean detorque values for three screw tightening sequences were 12.3 Ncm, 12.6 Ncm, and 12.0 Ncm, respectively. 2. The mean detorque values for two screw tightening methods were 12.0 Ncm, and 12.2 Ncm, respectively. 3. The mean of mimimum detorque values for three screw tightening sequences and for two tightening methods were 10.6 Ncm, 11.1 Ncm, 10.5 Ncm, and 9.8 Ncm, respectively. 4. No statistically significant differences among the variables of screw tightening sequence and tightening method were found (p>.05) for detorque values and for mimimum detorque values. Conclusion: Within the limitations of this study, the screw tightening sequence and tightening method did not have a significant effect on the detorque values for a well-fitting implant superstructure.

• The Journal of Korean Academy of Sensory Integration
• /
• v.11 no.1
• /
• pp.39-49
• /
• 2013

Objective : We studied adolescent's sensory processing characteristics and classification of the depending on the adolescent's sensory processing characteristics degree. And we studied depending on sensory processing characteristics the difference of the general characteristics; sex, health status, hospital visit, the usual sensory problem. In addition, we investigated differences in each group; sensory processing characteristics, stress, depression, and self-esteem. Methods : We have collected 310 for students in Busan, Gyeongsangnam-do region of high school to distribute the questionnaire; Adolescent / Adult sensory profile (AASP), the Korean version Daily Stress Assessment (K-DSI), Beck Depression Inventory (BDI), and Self-Esteem Scale (SES). The questionnaire used in the final study part 310 to part 288 of which corresponds to 92% of the total questionnaire. The data analysis was used SPSS for windows 18.0 statistical analysis. Results : Sensory Seeking of sensory processing characteristics of adolescents in the study was low score. The higher stress score, Sensory Sensitivity and Sensation Avoiding score were higher, and the higher depression score, Low Registration and Sensation Avoiding score were higher. The lower self-esteem score, Sensation Avoiding and Sensory Sensitivity score was higher whereas Sensation Seeking score was lower. Conclusions : Study about Korean's mean in the next studies should be investigate. In addition, a lot of study about adolescents with sensory processing problems should be investigate.

• Korea journal of population studies
• /
• v.21 no.2
• /
• pp.37-57
• /
• 1998

In recent, Korea introduced the local self-government system. And the local government tried to establish and implement plans for women. Those plans were established on the basis of not the particular environments of regional societies but similar policies of central government. Despite of geographical migrations, we can find differences of population structure and economic status among regions. As the result, most of regional policies for women were ineffective. This paper examines population structure and economic status of women by regions and recommends the long and medium direction for local policies for women. For analysis, it utilizes the 2% sample data-set of National Statistical Office's '1995 Population and Housing Census' in Korea. The findings of this paper are summarized as following; Firstly, the dependency rate of Chungchong-do, Cholla-do, Kyongsangnam-do will reach about 45% in 2000. Therefore, as soon as possible, those local government should establish the labor policies to enhance the economically active participation rate of the elderly persons and welfare policy for them. Secondly, the level of women's economic participation. Thus, local governments should set up labor market policies for women according to regional situations. For examples, in Kyonggi-do, Seoul, Daejeon, Daeku which unemployment rate of the highly educated women are relatively high, those local governments should seek the measures to tackle unemployment problem of them. Thirdly, due to the differences regional economic structure, women's employment structures differed also by region. Hence, local governments should formulate suitable plans to consider the working status of regional women's workers.

• Journal of Digital Convergence
• /
• v.14 no.6
• /
• pp.415-423
• /
• 2016

Numerous studies have been made on the negative effects of online games, as the negatives effects of the usage of online games have been recognized as social issues. However, this is a study on the positive functions of online gaming; more specifically, on how the guild activities on online games affect the user's leadership. This study has conducted in-depth interviews with online games, and drew the result using Giorgi's phenomenological analysis as for the methodology. 3 people participated in the research - a high school student, a university student, and an adult office worker - all of whom with experiences of guild leading on online games. To achieve the goal of this study, this study based the subjects' experience to analyze how online game guild activities have affected leadership on the subjects' real lives. As a result, timidity turned into initiation; not only leadership, but also decision making ability and coworking ability, as well as problem solving ability have shown improvement. Through this study, one can see that among the elements of online game, experience in guild activities is providing opportunities for enhancing leadership and possibilities for improving various other abilities. I hope more researchers continue studying interesting and diverse powers of online games based on this study.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.13 no.1
• /
• pp.13-24
• /
• 2000

Current specification prescribes that upper and lower reinforcement mat is required in the same amount to resist negative and positive moment in bridge decks. But the negative moment is much smaller than positive moment because the actual behavior of decks consists of local deflection of slab and global deflection of girder. From this study, the analysis method based on harmonic analysis and slope-deflection method was developed and verified by finite element method. The negative moment, obtained from this method, were smaller than those computed based on the KHBDC specifications as much as 40∼50% in the middle of bridge. The amount of reduction of the design negative moment was shown herein to be dependent on variable parameters as shape factor(S/L) of slab, relative stiffness ratio of girder and deck slab, and so on. This investigations indicate that the upper reinforcement mat to resist negative moment can be removed. But further experimental study is required to consider durability and serviceability. From this new design concept, the construction expense can be reduced and the problem of decreasing durability resulting from corrosion of upper reinforcement steel settled.

• Journal of dental hygiene science
• /
• v.12 no.3
• /
• pp.217-225
• /
• 2012

The purpose of this study is to measure the relation of employment stress and self-esteem in some health college students and to consider a proper means for the solution. The population of the research is some randomly chosen health college students located in Seoul City during the period from May 10 to June 11 2010, and the sample of 295 students were recruited as the analysis object group. The data on general characteristics and employment stress were collected by a questionnaire survey. The collected data were analyzed with the SPSS WIN 12.0 program. The following shows the results of this study. 1. Employment stress was low in high group of satisfaction in campus life. It was statistically significant(p<0.001). 2. Mean scores of total self-esteem in study population were 3.1 and positive self-esteem level(3.76) were higher than negative ones (2.44)(p<0.001). 3. The relation between employment stress and selfesteem(r=0.132) revealed significant correlation. 4. In regression analysis, home economy, competence for a schoolwork, satisfaction in campus life, self-esteem(p<0.001) were proved as significant factors that is related to the employment stress. In other words, It is significant statistically that the lower home economy, competence for a schoolwork, satisfaction in campus life, self-esteem, the higher employment stress level. I suggest with the result of the study that for coping effectively employment stress of health college students, we will need to open an educational development considering self-esteem and an exclusive employment counsel window for better administrationwelfare service in campus, to expand industry-academic cooperation in community. Because of students are independent responsibility of employment, active effort must take precedence in order for the solution of problem by themselves. Also, we will need to create better academic environment and show more concern, consideration, love in family.