• Journal of the Korean Geophysical Society
• /
• v.3 no.3
• /
• pp.161-174
• /
• 2000

Bayesian inversion is a stable approach to infer the subsurface structure with the limited data from geophysical explorations. In geophysical inverse process, due to the finite and discrete characteristics of field data and modeling process, some uncertainties are inherent and therefore probabilistic approach to the geophysical inversion is required. Bayesian framework provides theoretical base for the confidency and uncertainty analysis for the inference. However, most of the Bayesian inversion require the integration process of high dimension, so massive calculations like a Monte Carlo integration is demanded to solve it. This method, though, seemed suitable to apply to the geophysical problems which have the characteristics of highly non-linearity, we are faced to meet the promptness and convenience in field process. In this study, by the Gaussian approximation for the observed data and a priori information, fast Bayesian inversion scheme is developed and applied to the model problem with electric well logging and dipole-dipole resistivity data. Each covariance matrices are induced by geostatistical method and optimization technique resulted in maximum a posteriori information. Especially a priori information is evaluated by the cross-validation technique. And the uncertainty analysis was performed to interpret the resistivity structure by simulation of a posteriori covariance matrix.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.59-59
• /
• 2017

Rice (Oryza sativa L.) is the most important crop and its yield must be improved to feed the increasing global population. Recently developed high-yielding varieties with extra-large sink capacity often have a problem in unstable grain-filling. Therefore, understanding limiting factors for improving grain-filling and controlling them are essential for further improvement of rice grain yield. However, since grain-filling rate was determined by complex sink-source balance, the ability of grain-filling was very difficult to evaluate. Source ability for 'grain' was not only determined by the ability of carbon assimilation in leaves, but also that of carbon translocation from leaves to panicles. Sink strength was determined by the complex carbon metabolism from sucrose degradation to starch synthesis. Hence, to evaluate the grain-filling ability and determine its regulatory steps, the whole picture of carbon flow from photosynthesis at leaves to starch synthesis at grains must be revealed in a metabolite level. In this study, the yield and grain growth rate of three high-yielding varieties, which show high sink capacity commonly, were compared. Momiroman showed lower grain filling rate and slower grain growth rate than the other varieties, Hokuriku 193 and Tequing. To clarify the limiting point in the carbon flow of Momiroman, $CO_2$ labeled by stable isotope ($^{13}C$) was fed to three varieties during ripening period. The ratio of $^{13}C$ left in the stem was higher in Momiroman 24 hours after feeding, suggesting inefficient carbon translocation of Momiroman. More interestingly, $^{13}C$ translocation from soluble fraction to insoluble one in the grain seemed to be slower in Momiroman. To get the further insight in a metabolite level, we are now trying the $^{13}C$ labeling metabolome analysis in the developing grains.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.92-92
• /
• 2017

Bakanae disease is one of the most serious and oldest problems of rice production, which was first described in 1828 in Japan. This disease has also been identified in Asia, Africa, North America, and Italy. Germinating rice seeds in seed boxes for mechanical transplantation has caused many problems associated with diseases, including bakanae disease. Bakanae disease has become a serious problem in the breeding of hybrid rice, which involves the increased use of raising plants in seed beds. The indica rice variety Shingwang was selected as resistant donor to bakanae disease. One hundred sixty nine NILs, YR28297 ($BC_6F_4$) generated by five backcrosses of Shingwang with the genetic background of susceptible japonica variety, Ilpum were used for QTL analysis. Rice bakanae disease pathogen, CF283, was mainly used in this study and inoculation and evaluation of bakanae disease was performed with the method of the large-scale screening method developed by Kim et al. (2014). SSR markers evenly distributed in the entire rice chromosomes were selected from the Gramene database (http://www.gramene.org), and the polymorphic markers were used for frame mapping of a $BC_5F_5$ resistant line. Here, we developed 168 near-isogenic rice lines (NILs, $BC_6F_4$) to locate a QTL for resistance against bakanae disease. The lines were derived from a cross between Shingwang, a highly resistant variety (indica), and Ilpum, a highly susceptible variety (japonica). The 24 markers representing the Shingwang allele in a bakanae disease-resistant NIL, YR24982-9-1 (parental line of the $BC_6F_4$ NILs), were located on chromosome 1, 2, 7, 8, 10, 11, and 12. Single marker analysis using an SSR marker, RM9, showed that a major QTL was located on chromosome 1. The QTL explained 65 % of the total phenotype variation in $BC_6F_4$ NILs. The major QTL designated qBK1 was mapped in 91 kb region between InDel15 and InDel21. The identification of qBK1 and the closely linked SSR marker, InDel18, could be useful for improving rice bakanae disease resistance in marker-assisted breeding.

• Korean Journal of Head & Neck Oncology
• /
• v.8 no.2
• /
• pp.112-118
• /
• 1992

Neck mass as a primary presenting sign is a common problem that physicians and surgeons alike have to face but conclusive diagnosis cna be made only by histopathological examination. During the period of four years from January 1988 to December 1991, three hundred sixteen diagnostic incisional or excisional biopsies of the neck masses were performed at the outpatient department of Surgery, Seoul National University Hospital and tissue diagnoses were confirmed by histopatholotical examination. On which a clinical analysis was performed and its results were compared with the results of one hundred fifteen Fine Needle Aspiration Cytologic examinations on neck masses during the same period. The results were as follows: In the histologic types of neck masses. inflammatory disease was the most common (58.2%), metastatic malignant tumor(22.5%), benign tumor(15.2%). primary malignant tumor(0.4%) in decreasing order. Among the individual lesions. tuberculous lymphadenitis was the most common(29.4%) and nonspecific lymphadenitis was the next. Of overall sexual distribution, female preponderated by a ratio of 1.15:1, but in the primary and metastatic malignancies, male did by a ratio of 1.60:1 and 1.53:1, respectively. The most common age group was third decade(26.8%), and fourth decade was the next(20.9%) but in malignant tumors. sixth decade was the most commom. The duration of symptom between one and three months(33.8%), was the most common and between three and six month was the next but the difference between the individual diseases was not significant. Of the metastatic tumor of seventy one cases, primary site was found in fifty cases(84.2%) and stomach cancer was the most comon primary site. In the result of the Fine Needle Aspiration Cytologic(FNAC) examinations, positive for mlignant cells was the most common(33.1%), following the frequencies with tuberculosis(22.6%), and nonspecific lymphadenitis(16.5%) in decreasing order. Eleven cases of FNAC underwent diagnostic biopsies and the diagnostic accuracy of FNAC was 83.3%. Conclusively, in our study, tuberculous lymphadenitis was the most common histologic type, female was predominant third decade was the most common age group. the duration of symptom between one and three month was the most common and in the metastatic tumors, stomach cancer was the most common primary site.

• 한국환경농학회:학술대회논문집
• /
• 2009.07a
• /
• pp.3-18
• /
• 2009

It is difficult for consumers to satisfy high safety request with post-management method such as inspection and surveillance, as various changes in-and-out of the country associated with food safety. In terms of food safety problems related to foods, it is crucial to recognize public health and consumer protection and construct pre-preventive Food Control System. A joint committee, FAO/WHO made the following consultations to the National Food Safety System. ${\circ}$ Approach entirely from farm to table ${\circ}$ Get ready for Risk Analysis System ${\circ}$ Secure transparency ${\circ}$ Establish the optimal policy by evaluating the effect of regulation When it comes to summarizing the consultation, it would be accumulated as two key words; "Efficiency" and "Credibility". Whereas the problem of efficiency focuses on precaution rather than post-management, it requires policy option to maximize consumer's benefit by evaluating the cost for the Food Safety Management and its benefit. Also, analyzing risk's character and amount, demanding an optimal means, and introducing scientific analysis system put much value on the stakeholder's communications are procedure's security which can satisfy both "Efficiency" and "Credibility" simultaneously. Especially, it is emphasized here that Risk Assessment need to be separated from Risk Management. This action is a valid means of credibility security throughout improving transparency. A number of nations and organizations have reformed the method of food management passing through reflection and examination of the prior National Food Safety Management since BSE occurred in Britain, 1996. FSA; Food Standard Agency, AFFSA, EFSA, BfR, and FSC are Risk Assessment Organization functionally separated from Risk Management Organization, JECFA, JMCFA, JMPR, JEMRA in Codex charge Risk Assessment internationally. In case of advanced countries excluding several those such as The U.S. and so forth, though these Risk Assessment Organizations are either separated functionally within Risk Management Organization or operated as apart organ, common factors are in which it has independence as Science Base. While securing independence of Risk Assessment Function, it is a tendency Risk Management should be functionally unified into efficiency as well. Though Germany constructs integral Risk Management System of diverse ways according to social and political conditions of each country such as GFOCP, DVFA, SNFA, CFIS and AQIS, there is a key word in the center, "Securing efficiency of Food Safety Management". However our nation has a representative plural；diversified system with The U.S., we took a step forward for unification as empowering policy's generalization；adjustment and Risk Assessment Function by means of enacting the "Food Safety Fundamental Law" in 2008 and establishing the "Food Safety Policy Commission" with private and governmental sectors in the Prime Minister's office. Even though the unification of Risk Management hereby increased, there is the lack of strengthening function of Risk Assessment and securing independence. It needs to be required for the professional committee in Food Safety Policy Commission to develop as a exclusive office of Risk Assessment by separating from a policy decision. Administrative Branches should reinforce feeble functions such as fundamental investigation；research for carrying out Risk Assessment with securing efficiency throughout reassessment of prior Risk Management Means.

• The Journal of Engineering Geology
• /
• v.26 no.3
• /
• pp.413-422
• /
• 2016

With the rapidly increasing population density and development of infrastructure, the loss of life and property damage caused by landslides has increased gradually in urban area. Especially, Because Busan has high percentage of mountainous terrain among the metropolitan in Korea, it is unavoidable to develop mountainous region excessively. The objective of this evaluation is to study on landslide hazard possibility for Mt. Hwangryeong in Busan Metropolitan City using the infinite slope model considering the groundwater level. All data related to creating the thematic maps was carried out using ArcGIS 10.0. The results show that FS (Factor of Safety) for landslide is inversely proportional to groundwater level change as expected. Most area indicates stable state in dry condition, and unstable area increase due to high pore water pressure when the groundwater level rise. However, several places in high lineament density area where landslide has been previously occurred, are more stable than other places according to the analysis. This inconsistency between real situation and analysis results indicates that additional analytical method would be necessary to solve the problem. Therefore, we suggest that development of new infiltration theory for unsaturated zone would be helpful to evaluate groundwater level distribution as time goes by.

• Journal of environmental and Sanitary engineering
• /
• v.24 no.1
• /
• pp.1-12
• /
• 2009

The various environmental problems that we face on today are basically about environmental quality. Since early 1960s affluent material was produced because of remarkable economic growth by many cooperations. However, for the lack of environmental policy, environmental pollutions has been serious. The central government should transfer the producing and consuming structure to environmental affinity through the regulations for developing Korea as a model of environmental nation which takes an active part in global environmental programme and in which the environment and economy are well harmonized. Moreover, the central government should take the lead in prevention of environmental pollution through the direct policies such as strengthening the discharge limit or setting up environmental basic institutions by securing budget for conserving environment. This thesis emphasize on the public institution among many environmental basic institutions for environmental anti-pollution project. It will find the problems with running those institutions, and will suggest the preview of improvement. Also, it is necessary to investigate of variation trend for inflow and pollutant loading to environmental infrastructure as increased of the diffusion rate as established and maintenance of sewer system. The purpose of this study is to investigate for inflow and pollutant loading to environmental infrastructure, and also to provide the method of efficiently maintenance and management. The results obtained were summarized as follows; 1. Survey of actual condition on operation and management of environmental infrastructure was evaluated the propriety of treatment process and problem of plant management. 2. Analysis of pollutant loading contribution for river system of environmental infrastructure with data analysis of water quality measuring network. 3. To investigate on case study for efficiently maintenance and management of environmental infrastructure. The result on this study was provide the method of efficiently maintenance and management with survey for establish and repair of sewer system and survey of actual condition on operation and management of environmental infrastructure in the water area of discharge to Geum River System. Application as guideline for establish and management of environmental infrastructure, and management of Geum River System. Also, application for preliminary data for fulfill-assess of total effluent regulation of water pollution.

• Journal of Korean Society of Steel Construction
• /
• v.18 no.6
• /
• pp.747-758
• /
• 2006

With the growth of economy, the esthetic values of bridges become significant points in the decision process of a type of new bridges. So, it is common that a long-span bridge or a multi-purpose bridge are selected as the type of new bridges. Also, the economic growth derives increase in traffic and then the increased traffic derives multi purpose bridges from the decision process of bridge types. In the multi-purpose bridges with private fund, the construction cost is simply alloted to several organizations according to the percentage of participation and usage. But the allotment of the maintenance cost is not simple. Because the loads and safety factors in design are different between the criterion of design of highway bridges and that of railway bridges. In this study, we verify the possible problems in case of allotment method of maintenance cost in foreign examples as well as domestic example. As one of the method of determination of allotment ratio in maintenance cost, the method based on the stress of structural analysis is presented and it can be an example in the similar problem later.

• Journal of Korean Society of Steel Construction
• /
• v.26 no.2
• /
• pp.105-118
• /
• 2014

The number of the deteriorated bridge has been sharply increased due to the increase in the bridge service period in Korea. Local corrosion problem of structural member can be occurred according to atmospheric corrosion environments based on the installation location of steel bridges. Especially, in case of the plate girder bridge, corrosion damage is concentrated on the web panel and stiffener at girder end. An asymmetrical shear resistant web section in the plate girder bridge can be caused from the local corrosion of the web panel, because local corrosion is not symmetrically occurred to the bridge. In this study, therefore, the shear buckling strength and behavior of a plate girder with asymmetrically corroded web panel was numerically evaluated using FE analysis, which was considering an aspect ratio and corrosion damage level of web panel. The shear buckling strength reduction of an asymmetrical shear resistant web panel was compared and evaluated according to corroded volume ratio for a web panel and for diagonal tension field of a web panel.

• Korean Journal of Soil Science and Fertilizer
• /
• v.36 no.6
• /
• pp.367-375
• /
• 2003

The aim of this study was to investigate the soil physical properties and the traction characteristics of paddy field before tillage by a computer simulation. Soil physical properties, such as soil moisture content, bulk density, soil hardness, and soil texture were measured in the twelve rice production area. Mathematical model based on dimensional analysis which include soil physical properties and vehicle factors was used for the computer simulation. Most of the soil texture of the investigated area was silty loam, loam and silty clay loam. Soil moisture content ranged between 20 and 40% mostly. Soil bulk density was in the range of 1,500 to $1,700kg\;m^{-3}$. Soil hardness ranged between 2 to $12kg\;cm^{-2}$ mostly. Soil hardness incorporates the effects of many soil physical properties such as moisture content, texture and bulk density, and so the range of soil hardness was greater than that of any other physical properties. The predicted net traction was in the range of 70 to 1,500 kgf depending on the area, but it was above 1,000 kgf for most of the investigated area. Thus it was concluded that 50 HP tractor can pull the four row moldboard plow considering the conventional tillage depth and width. But for the soft soil area such as Andong and Namyang, tractor itself may have mobility problem and show high slip during plowing operation.