• The Korean Journal of Pain
• /
• v.6 no.2
• /
• pp.237-246
• /
• 1993

세포막에서 마취제의 작용점을 규명하기 위하여, 마취제의 많은 부분을 차지하는 n-Alkanol을 이용하여, 소의 synaptosomal plasma membrane vesicles(SPMV)에서 n-Alkanol의 침투 정도를 형광 probe를 이용한 형광소광법을 통하여 검색하였다. n-Alkanols는 SPMV 외부 단층(outer monolayer)의 표면에 주로 분포하되 그 탄소수에 비례하여 소수성 부위에 분포되는 양이 증가되는 경향을 나타내었다(1-decanol은 제외). Methanol, Ethanol, 1-propanol, 1-butanol, 1-pentano, 1-hexanol, 1-heptanol, 1-octanol, 1-nonanol 및 1-decanil은 SPMV 외부 단층의 표면(친수성 부위)에 분포되는 것에 비하여 각각 949, 416.8, 214.8, 90.3, 53.7, 15.20, 6.80, 2.00, 1.03 및 2.40 배가 된다는 것을 확인하였다. 1-decanol은 $C_{10}$인데도 불구하고 $C_8$인 1-octanol에 비하여 적은 양이 소수성 부위에 침투 분포한다는 것이 확인되었다.

• Journal of the Korean GEO-environmental Society
• /
• v.2 no.1
• /
• pp.5-13
• /
• 2001

The purpose of this paper is to present the pressuremeter test result and analysis for Yulchon Combined Cycle Power Plant(CCPP) site. The CCPP site is old backfill area with the hillcut materials obtained from the borrow sources near the mountains. The geology of this area consists of 6-layers from the ground level such as hillcut material, dredged clay fill, silty sand, original marine clay, weathered rock, soft rock, etc.. The pressuremeter test has been carried out with three different probe, in size and membrane type for all layers except the clay layers. The cone penetration test has been also carried out to collaborate with the pressuremeter test in the hillcut material layer.

• The Korean Journal of Pain
• /
• v.6 no.1
• /
• pp.74-82
• /
• 1993

신선한 소의 대뇌피질로부터 synaptosomal plasma membrane vesicles(SPMV)를 분리하고 이 SPMV로부터 추출한 총지질(cholesterol과 각종 인지질 함유)로서 제제한 인공세포막(SPMVTL)에서의 n-alkanols 침투 정도를 형광 probe를 이용한 형광 소광법을 통하여 검색하였다. n-alkanols는 SPMVTL 외부 단층(outer monolayer)의 표면에 주로 분포하되 그 탄소수에 비례하여 소수성 부위에 분포되는 양이 증가되는 경향을 나타내었다(1-decanol은 예외). Methanol, ethanol, 1-propanol, 1-butanol, 1-pentanol, 1-hexanol, 1-hepatnol, 1-cotanol, 1-nonanol 및 1-decanol은 SPMVTL 외부 단층 표면(친수성 부위)에 분포되는 것이 소수성 부위에 분포되는 것에 비하여 각각 650, 288, 151.6, 69.5, 36.8, 11.9, 4.8, 1.6, 0.74, 2.1배가 된다는 것을 확인하였다. 1-decanol은 $C_{10}$인데도 불구하고 $C_8$인 1-octanol에 비하여 적은 양이 소수성 부위에 침투 분포되는 것이 확인되었다. 또한 n-alkanols는 저자등이 이미 보고한 SPMV에서의 경우보다도 본 연구에서의 SPMVTL의 경우가 현저하게 많은 양이 소수성 부위로 침투 분포된다는 것이 확인되었다.

• The Korean Journal of Pain
• /
• v.6 no.1
• /
• pp.67-73
• /
• 1993

소의 신선한 대뇌피질로부터 synaptosomal plasma membrane vesicles(SPMV)를 분리한 후 이 SPMV로부터 추출한 모든 인지질들로서 제제한 인공세포막(SPMVPL)에서의 n-alkanols 침투 정도를 형광 probe를 이용한 형광 소광법을 통하여 검색하였다. n-alkanols는 SPMVPL 외부 단층(outer monolayer)의 표면에 주로 분포하되 그 탄소수에 비례하여 소수성 부위에 분포되는 양이 증가되는 경향을 나타내었다. methanol, ethanol, 1-propano, 1-butanol, 1-pentanol, 1-hexanol, 1-heptanol, 1-octanol, 1-nonanol 및 1-decanol은 SPMVPL 외부 단층의 표면(친수성 부위)에 분포되는 것이 소수성 부위에 분포되는 것에 비하여 각각 432.4, 208.9. 125.6, 88.2, 19.3, 7.9, 2.6, 1.0, 0.42, 1.36배가 되었다. 1-decanol은 $C_{10}$인데도 불구하고 $C_8$인 1-octanol에 비하여 적은 양이 소수성 부위에 침투 분포된다는 것이 확인되었다. n-alkanols의 침투에 대하여 저자등이 이미 보고한 바 있는 SPMV 및 SPMVTL(cholesterol+phospholipids)의 경우보다도 본 연구에서의 SPMVPL의 경우가 현저하게 많은 양이 소수성 부위로 침투 분포된다는 것도 확인되었다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.3C
• /
• pp.127-136
• /
• 2009

The objective of this study is the development and verification of the 4-electrode resistivity probe (4ERP) for the estimation of electrical properties of the saturated soils. The 4ERPs with wedge and plane types are manufactured to obtain the electrical resistivity without polarization at the electrodes by using Wenner array. The wedge type is for the penetration into the soil samples and the plane type is for the installation into the cells used for the laboratory tests. The consolidation tests are carried out by using 6 types of glass beads and 3 types of sands in size. The test results show that the electrical resistivity increases with a decrease in the porosity, and the constant m used in Archie's law is dependent on the particle shape rather particle size. The one dimensional liquefaction tests show that the porosity obtained by the 4ERP is similar to that determined by the volume fraction. The penetration of the 4ERP into the large scale calibration chamber produces the resistivity profiles. This study demonstrates that the 4ERP may effectively estimate the porosity of the saturated soils.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.5 no.2
• /
• pp.12-21
• /
• 1986

Generally, butt welds with plate thickness $30{\sim}40mm$ are welded with groove angle $40^{\circ},\;60^{\circ},\;70^{\circ}$, etc. In the detection of internal weld defects, oblique testing with single probe has been mainly used. But, recently, in acccordance with enlargement of welded structure, thick plate with 100-200mm are frequently required. Thus I-groove welding method was lately developed and often used. In this case, most frequently generated defects are the lack of weld penetration and incomplete fusion between base metal and welding material. If we would detect by oblique testing with single probe, detecting flaw is occassionally impossible or very underestimated. In this study, the limit for applying tandem method was studied in dise and band type flaws. The estimation of flaw size could be within 10% error compared to real flaws.

• Electrical & Electronic Materials
• /
• v.8 no.3
• /
• pp.254-260
• /
• 1995

A method is described for the design and fabrication of the sensor interface circuits on the Clark electrodes for the dissolved oxygen(DO). The discussion includes a method for the +5 V single-supply driving for the sensor circuits, which has low power comsumption for the front-end electronics. DO probe under test is composed of the Clark electrode with silver anode, gold cathode and the electrolyte of half saturated KCI solution and the FEP teflon memtrance for the oxygen penetration. Typical polarograms for the DO probes by using this sensor circuit reveals high accuracy over 99% of the I to V conversion. Partial pressure of oxygen obtained from the polarograms are well suited to the results calculated. It is expected that the proposed sensor circuits can be utilized into the customized IC for the battery-driven small-size DO meters.

• Korean Journal of Food Science and Technology
• /
• v.28 no.3
• /
• pp.470-474
• /
• 1996

The dielectric properties, dielectric constant (${\varepsilon}‘$) and loss factor (${\varepsilon}’$), of skin and pulp of fresh ginseng were measured from $25^{\circ}C$ to $67^{\circ}C$ using an open-ended coaxial probe technique for 915 MHz and 2450 MHz. Pulp and skin had dielectric constant of $30{\sim}64$ and loss factor between 10 and 20, each variable having a respective frequency dependence typical of materials with high water content. Although the loss factor was nearly constant, the dielectric constant increased as moisture content increased. The dielectric constant of ginseng pulp increased as temperature increased (temperature ${\leq}56^{\circ}C$), but any significant differences were not found in skin dielectric properties. Penetration depth for fresh ginseng were about 2 cm at 91.5 MHz and 1cm at 2450 MHz.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.09a
• /
• pp.241-252
• /
• 2010

This study investigates the application of dilatometer test for evaluating the deformation characteristics of granular soil. $K_D$ is the most sensitive to the stress history among CPT and DMT measurements, and $E_D$ and $q_c$ are observed to be similarly affected by the stress history. The coefficient of at-rest earth pressure($K_0$) is an indirect measure evaluating the stress history of granular soil. A relation using only DMT indices provides appropriate prediction of $K_0$ values. Although penetration of dilatometer inevitably induces the failure of cementation bonds, $E_D$ reflects the deformation characteristics of undamaged cementation relatively well. Therefore, a slightly better prediction of M value for cemented sand is achieved by using $E_D$ rather than $q_c$. Because of the weaker particle strength of calcareous sand compared than quartz sand, the majority of sand particles adjacent to dilatometer probe will be crushed during penetration. The particle crushing will induce the less contraction of the dilatometer membrane during penetration, consequently, the smaller $K_D$ and $E_D$ of calcareous sand.

• Journal of the korean society of oceanography
• /
• v.36 no.1
• /
• pp.1-8
• /
• 2001

An in-situ four-electrode contact resistivity probe system was designed, and field-tested in submarine sediments. Seismic survey was also performed to support and compare the results of electric survey. The probe was designed to be driven to selected depths below the seafloor using a Vibracore system. The four insulated electrodes were, spaced equidistant across the wedge, were extended beyond the probe tip to minimize effects of sediment disturbance by the wedge insertion. In-situ measurements of resistivity were recorded on board by precision electronic equipment consisting of signal generators and processors, and by temperature-monitoring systems. Overall limits of Uncertainty at respective depths below the seafloor are up to ${\pm}$10 of the measured values. Best estimates of conductivity are considered to be ${\pm}$3 percent of the reported values. Resistivity measurements were made at six sites in carbonate sediments to a maximum depth of penetration of about 5 m. Average values of conductivity range between 0.88 and 1.21 mho/m. The results show the seabed is composed of alternating layers of relatively high-conductivity material (0.8 to 1.4 mho/m) in thicknesses of more or less one meter and layers about 30 cm thick having relatively low conductivities (0.4 to 0.8 mho/m).