• Journal of The Korean Society of Agricultural Engineers
• /
• v.60 no.5
• /
• pp.17-27
• /
• 2018

The objective of this study is to identify the priority area where the nonpoint source pollution (NPS) management is required and to set up the load reduction goals for the identified priority area. In this study, the load duration curve (LDC) was first developed using the flow and water quality data observed at 286 monitoring stations. Based on the developed LDC, the priority area for the NPS pollution management was determined using a three-step method. The 24 watersheds were finally identified as the priority areas for the NPS pollution management. The water quality parameters of concern in the priority areas were the total phosphorus or chemical oxygen demand. The load reduction goals, which were calculated as the percent reduction from current loading levels needed to meet target water quality, ranged from 67.9% to 97.2% during high flows and from 40.3% to 69.5% during moist conditions, respectively. The results from this study will help to identify critical watersheds for NPS program planning purposes. In addition, the process used in this study can be effectively applied to identify the pollutant of concern as well as the load reduction target.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.4
• /
• pp.17-27
• /
• 2007

The enhanced distributed channel access (EDCA) of IEEE 802.11e has been standardized for supporting Quality of Service (QoS) in wireless LANs. In the EDCA, support of QoS can be achieved statistically by reducing the probability of medium access for lower priority traffics. In other words, it provides statistical channel access rather than deterministically prioritized access to high priority traffic. Therefore, lower priority traffics affect the performance of higher priority traffics. Consequently, at the high loads, the EDCA does not guarantee the QoS of multimedia applications such as voice and video even though it provides higher priority. In this paper, we propose a simple and effective scheme, called deterministic priority channel access (DPCA), for improving the QoS performance of the EDCA mechanism. In order to provide guaranteed priority channel access to multimedia applications, the proposed scheme uses a busy tone for limiting the transmissions of lower priority traffics when higher priority traffic has data packets to send. Performance of the proposed scheme is investigated by numerical analysis and simulation. Our results show that the proposed scheme outperforms the EDCA in terms of throughput, delay, jitter, and drop under a wide range of contention levels.

• Safety and Health at Work
• /
• v.9 no.2
• /
• pp.133-139
• /
• 2018

Background: Selecting priority occupational carcinogens is important for cancer prevention efforts; however, standardized selection methods are not available. The objective of this paper was to describe the methods used by CAREX Canada in 2015 to establish priorities for preventing occupational cancer, with a focus on exposure estimation and descriptive profiles. Methods: Four criteria were used in an expert assessment process to guide carcinogen prioritization: (1) the likelihood of presence and/or use in Canadian workplaces; (2) toxicity of the substance (strength of evidence for carcinogenicity and other health effects); (3) feasibility of producing a carcinogen profile and/or an occupational estimate; and (4) special interest from the public/scientific community. Carcinogens were ranked as high, medium or low priority based on specific conditions regarding these criteria, and stakeholder input was incorporated. Priorities were set separately for the creation of new carcinogen profiles and for new occupational exposure estimates. Results: Overall, 246 agents were reviewed for inclusion in the occupational priorities list. For carcinogen profile generation, 103 were prioritized (11 high, 33 medium, and 59 low priority), and 36 carcinogens were deemed priorities for occupational exposure estimation (13 high, 17 medium, and 6 low priority). Conclusion: Prioritizing and ranking occupational carcinogens is required for a variety of purposes, including research, resource allocation at different jurisdictional levels, calculations of occupational cancer burden, and planning of CAREX-type projects in different countries. This paper outlines how this process was achieved in Canada; this may provide a model for other countries and jurisdictions as a part of occupational cancer prevention efforts.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.39 no.2
• /
• pp.59-68
• /
• 2002

In this paper, we compared and analyzed two new models of cyclic packet dropping algorithm, Adaptive Cyclic Packet Dropping algorithm (ACPD), and Non-adaptive Cyclic Packet Dropping algorithm (NCPD) with RIO. The ACPD algorithm drops adaptively packets for the congestion control, as predicting traffic pattern between each cycle. Therefore the ACPD algorithm makes up for the drawback of RIO algorithm and minimizes the wastes of the bandwidth being capable of predicting in the NCPD algorithm. We modelled two cyclic packet drop algorithms and executed a simulation and analyzed the throughput and packet drop rate based on Sending Priority changing dynamically depending on network traffic. In this algorithm, applying the strict drop precedence policy, we get better performance on priority levels. The results show that two new algorithms may provide more efficient and stricter drop precedence policy as compared to RIO independent of traffic load. The ACPD algorithm can provide better performance on priority levels and keep stricter drop policy than other algorithms.

• The KIPS Transactions:PartC
• /
• v.9C no.5
• /
• pp.783-788
• /
• 2002

Adaptive Cyclic Packet Dropping algorithm (ACPD), and Non-adaptive Cyclic Packet Dropping algorithm (NCPD) are applying stricter drop precedence than that of RIO algorithm. Especially, the ACPD algorithm drops adaptively packets for the congestion control, as predicting traffic pattern between each cycle. Therefore the ACPD algorithm makes up for the drawback of RIO algorithm and minimizes the wastes of the bandwidth being capable of predicting in the NCPD algorithm. And we executed a simulation and analyzed the throughput and packet drop rate based on Sending Priority changing dynamically depending on network traffic. In this algorithm, applying strict drop precedence policy, we get better performance on priority levels. The results show that the proposed algorithms may provide more efficient and stricter drop precedence policy as compared to RIO independent of traffic load. The ACPD algorithm can provide better performance on priority levels and keep stricter drop policy than RIO and the NCPD algorithm.

• The Journal of the Korea Contents Association
• /
• v.19 no.7
• /
• pp.13-21
• /
• 2019

Because security of Internet of Things(IoT) products and others is poor, there are many hacking incidents To prevent security threats, it is important for companies to first make products with high security levels and choose products that are safe for users. In response, the Korea Internet & Security Agency is testing the security of IoT products and linked mobile apps to impose ratings. Security certification service is a service that tests IoT products and linked mobile apps to ensure certain levels of security and issues certificates when they meet the criteria. It can induce autonomous security enhancement of IoT products, contribute to strengthening security capabilities of IoT companies in Korea and vitalizing their overseas advancement, and have the expected effect of resolving public anxiety over IoT products. In this study, the criteria for IoT security certification are presented, but the importance priority is sought to be derived for assessment items that need to be strengthened. This will help to provide guidelines that can contribute to strengthening the security capabilities of domestic Internet companies and boosting their overseas advancement.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.10
• /
• pp.6517-6526
• /
• 2015

This study analyzes the technical level and shows the priority technology for suspension bridges that play an iconic role as the country's landmark and contain an economic value. Analysis results show the technical level of suspension bridge is 82 percent compared to developed countries. In detail, the technical levels of 'materials', 'planning and design', and 'construction and maintenance' are 80.2 %, 81.7%, and 83.7% respectively. This study analyzes economic, social, technical importances and presents 'high-performance packaging material' as a priority technology.

• Industrial Engineering and Management Systems
• /
• v.15 no.1
• /
• pp.11-18
• /
• 2016

This paper considers a scheduling problem in a flexible job shop with a reconfigurable manufacturing cell. The flexible job shop has both operation and routing flexibilities, which can be represented in the form of a multiple process plan, i.e. each part can be processed through alternative operations, each of which can be processed on alternative machines. The scheduling problem has three decision variables: (a) selecting operation/machine pairs for each part; (b) sequencing of parts to be fed into the reconfigurable manufacturing cell; and (c) sequencing of the parts assigned to each machine. Due to the reconfigurable manufacturing cell's ability of adjusting the capacity, functionality and flexibility to the desired levels, the priority scheduling approach is proposed in which the three decisions are made at the same time by combining operation/machine selection rules, input sequencing rules and part sequencing rules. To show the performances of various rule combinations, simulation experiments were done on various instances generated randomly using the experiences of the manufacturing experts, and the results are reported for the objectives of minimizing makespan, mean flow time and mean tardiness, respectively.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.31 no.4 s.163
• /
• pp.615-623
• /
• 2007

This study aimed to construct an effective decision-making model on selection of cloth stores using AHP technique. The proposed AHP structure consists of three levels. The highest level includes the cloth stores alternative which are department store, specialty store, and a clothes store. The second level consists of the key performance measurements for evaluating the optimal selection of cloth stores, such as location, facilities, product, service, and promotion. The lowest level consists of items which affects the performance measurements in the upper level. The items are convenience location, courteous service, decor/ambience, availability of parking, etc. The data for this research were collected from questionnaires of 132 in Busan. Data were analyzed by frequency and AHP. As the result of this study, 'product' was decided as a most important item in department store, while 'location' was decided as a most important item in specialty store and a clothes store. And 'variety goods' evaluated as that of first priority in the totality evaluation items in department store, but 'convenience location' evaluated as that of first priority in the totality evaluation items specialty store and a clothes store.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.1
• /
• pp.119-130
• /
• 1996

This paper is the part I of the full study about improved structure of fully interconnected ATM switch to develop the small sized switch element and practical implemention of switch network. This part I paper describes about proposed switch structure, performance evaluations and some of considerations to practical implementation. The proposed structure is constructed of two step buffering scheme in a filtered multiplexer. First step buffering is carried out by small sized dedicated buffers located at each input port. And second step buffering is provided by a large sized common buffer at the output port. To control bursty traffic, we use speed up factor in multiplexing and priority polling according to the levels of buffer occupancy. Proposed structure was evaluated by computer simulation with two evaluation points. One is comparision of multiplexing discipline between hub polling and priority polling. The ogher is overall which should be considered to improve the practical implementation.