• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2012년도 춘계학술대회 논문집
• /
• pp.107-108
• /
• 2012

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2009년도 춘계학술대회 논문집
• /
• pp.935-936
• /
• 2009

• 한국인쇄학회지
• /
• 제25권1호
• /
• pp.1-9
• /
• 2007

• 한국결정성장학회지
• /
• 제28권3호
• /
• pp.123-129
• /
• 2018

고온 열처리 후에도 안정적인 발색 효과를 가지는 디지털 4원색(cyan, magenta, yellow, black; CMYK)의 세라믹 잉크를 활용한 세라믹 잉크젯 프린팅 기술은 다양한 제품의 디지털 이미지를 정확하고 빠르게 인쇄 가능하다는 장점을 가지고 건축 및 세라믹 산업 분야에서 기존 공정을 빠르게 대체하고 있다. 세라믹 잉크젯 프린팅 기술은 무기 안료의 분산 안정성과 함께 적절한 점도와 표면 장력을 필요로 하며 기존에는 이러한 요구조건에 부합하는 유기용매 기반의 잉크가 주로 사용되어져 왔으나 최근에는 VOCs가 발생하지 않는 환경친화적인 세라믹 잉크 소재에 대한 관심이 커지고 있다. 본 연구에서는 $CoAl_2O_4$ cyan 발색 무기안료와 alumino boro-silicate 유리 분말을 사용하여 친환경적인 수계 세라믹 복합잉크를 합성하고, 수계 시스템에서의 유변학적 물성과 분산성을 최적화하여 잉크젯 프린팅 공정에서의 토출성 및 프린팅 특성에 대해 연구하였다. 그 결과, 합성된 수계 세라믹 복합잉크는 점도 및 표면장력 조절을 통해 satellite drop이 발생하지 않는 토출 거동을 보였으며, 유리 기판 위에서도 높은 접촉각으로 인해 잉크 퍼짐 현상이 최소화되며 프린팅되는 것을 확인하였다.

• 한국정밀공학회지
• /
• 제24권5호
• /
• pp.89-96
• /
• 2007

Inkjet printing has become one of the most attractive manufacturing techniques in industry. Especially inkjet printing technology will soon be part of the PCB (Printed Circuit Board) fabrication processes. Traditional printing on PCB includes screen printing and photolithography. These technologies involve high costs, time-consuming procedures and several process steps. However, by inkjet technology manufacturing time and production costs can be reduced, and procedures can be more efficient. PCB manufacturers therefore willingly accept this inkjet technology to the PCB industry, and are quickly shifting from conventional to inkjet printing. To produce the printed circuit board by the inkjet technology, it must be harmonized with conductive nano ink, printing process, system, and inkjet printhead. In this study, micro patterning of conductive line has been investigated using the piezoelectric printhead driven by a bipolar voltage signal is used to dispense 20-40 ${\mu}m$ diameter droplets and silver nano ink which consists of 1 to 50 nm silver particles that are homogeneously suspended in an organic carrier. To fabricate a conductive line used in PCB with high precision, a printed line width was calculated and compared with printing results.

• 한국인쇄학회지
• /
• 제12권1호
• /
• pp.145-157
• /
• 1994

Litho printing ink vehicles based on rosin modified phenolic are faster drying, have better durability, are harder and glosser and have greater resistance to water than ones based on ester gums. Ink-Water balance and rheological properties are important in litho printing process. These physical properties is concerned with molecular weight of Resin to use vehicle. So this paper was studied about the effects of changing molecular weight of Rosin modified phenolic on surface tension, viscosity, pseudoplasticity and printability of Litho Inks. The results were as follows. 1) The surface tension of model inks depended on the molecular \veight of the resin : Dispersion componnent of ink increase but non dispersion component decrease as molecular weight of Resin increase. 2) Water pick-up of litho ink is more fast balance, using low molecular weight of Resin. 3) Viscosity, Yield value and Newtonian value of model inks increase as molecular weight of Resin increase. 4) The litho ink prepared with the modified phenolic of which molecular weight is about 20000 showed the highest printing density and gloss.

• 대한기계학회논문집B
• /
• 제31권12호
• /
• pp.1017-1023
• /
• 2007

This study is intended to analyze the effect of thin ink-film thickness around rotating printing roll on the printing quality in the gravure printing process which is used for making electronics circuit like a RFID tag with a conductive ink. The present work numerically estimates the film thickness around rotating roller partially immersed in ink for which the volume of fluid (VOF) method was adopted to figure out the film formation process around rotating roller. Parameter studies were performed to compare the effect of ink properties (viscosity, surface tension), operating condition (roller rotating speed, initial immersed angle) on the film thickness. The result indicates that the film thickness has a strong dependency on the rotating speed, while the surface tension has negligible effect.

• 한국인쇄학회지
• /
• 제27권1호
• /
• pp.59-71
• /
• 2009

Measuring ink penetration is one of the best ways to know paper printability. Ink penetration was effected by physical properties of newsprint paper. This study was carried out for the purpose of improvement printability with ink penetration of domestic newsprint paper. The samples were prepared by means of 20 newsprint paper manufacture company in Korea, and were tested by IGT printability tester. The results of this experiments showed that the depth of ink penetration according to the printing pressure. The maximum points in ink transfer curve and the coefficients of oil absorption of the papers also depend mainly upon the situation of anchor points.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.920-922
• /
• 2009

Flexible, transparent thin-film transistor with active layers composed of carbon nanotube-based conducting ink were fabricated on a plastic substrate by ink-jet printing. The properties of the formulated conducting ink containing carbon nanotubes, a conducting polymer, and additives were characterized and optimized. The conducting ink was applied to flexible thin-film transistors using ink-jet printing.

• 대한기계학회논문집 C: 기술과 교육
• /
• 제1권2호
• /
• pp.187-192
• /
• 2013

노즐을 이용한 인쇄 기법은 주로 전자 소자의 봉지를 위한 접착제의 인쇄분야에 적용되어 왔다. 노즐 인쇄를 통한 기능성 물질의 필름 형성은 커다란 도전이 될 수 있다. 본 논문에서는 노즐을 이용한 유기 잉크의 인쇄 특성을 실험을 통하여 알아보았다. 본 연구의 노즐 인쇄 실험에서 패턴을 형성하기 위한 잉크는 유기 발광 물질인 TAPC를 사용하였다. 인쇄된 패턴 폭은 잉크 공급 유량의 증가와 기판의 온도의 상승에 따라 증가하였다. 또한 인쇄된 패턴은 건조 후 커피링 형상을 나타내었다.