• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.31 no.1
• /
• pp.72-79
• /
• 1999

The binder plays important roles in determining the quality of pigment coating. In addition to its primary role of binding the pigment to the base paper, the binder performs several other important functions. The binder, also referred to as the adhesive, is the dominant in the aqueous phase of the formulation. Thus it plays a major role in determining viscosity, rheology, water release, and setting time for the coating. Latices based on styrene-butadiene dominate the market for synthetic paper coating binders. Consumption is high and is expected to increase further due to the present tendeyncy toward high-solids coating. The purpose of this study is understanding the impact of various parameters of latex(i.e. Tg, Particle size) affecting prontabilities and optical properties of the coated papers, as well as providing basic information on the use of amphoteric latex for improving print qualities of coated papers. Recently, amphoteric latices, Which are cationic at low pH's but turn anionic at high pH's have attracted interests of paper scientists and engineers. Therefore we investigated the effect of the Tg(glass transition temperature) and particle size of amphoteric latex on the coating qualities. We also studied the effect of mixing ratios (Amphoteric / Anionic)of latex on the coating qualities. Our results showed that Tg and particle size of amphoteric latex have to be controlled for optimizing coated paper qualities. The formulation consisting of 10 parts of amphoteric latex and 5 parts of anionic latex gave best results in ink receptivity, smoothness, air permeability, opacity and sheet gloss. If the results hold for the industrial paper coatings, the amount of expensive amphoteric latex can be reduced while achieving best available printing quality.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.458.2-458.2
• /
• 2014

We have demonstrated that simple brush-painted Ti-doped $In_2O_3$(TIO) films can be used as a cost effective transparent anodes for organic solar cells (OSCs). We examined the RTA effects on the electrical, optical, and structural properties of the brush painted TIO electrodes. By the direct brushing of TIO nanoparticle ink and rapid thermal annealing (RTA), we can simply obtain TIO electrodes with a low sheet resistance of 28.25 Ohm/square and a high optical transmittance of 85.48% under atmospheric ambient conditions. Furthermore, improvements in the connectivity of the TIO nano-particles in the top region during the RTA process play an important role in reducing the resistivity of the brush-painted TIO anode. In particular, the brush painted TIO films showed a much higher mobility ($33.4cm^2/V-s$) than that of previously reported solution-process transparent oxide films ($1{\sim}5cm^2/V-s$) due to the effects of the Ti dopant with higher Lewis acid strength (3.06) and the reduced contact resistance of TIO nanoparticles. The OSCs fabricated on the brush-painted TIO films exhibited cell-performance with an open circuit voltage (Voc) of 0.61 V, shot circuit current (Jsc) of $7.90mA/cm^2$, fill factor (FF) of 61%, and power conversion efficiency (PCE) of 2.94%. This indicates that brush-painted TIO film is a promising cost-effective transparent electrode for printing-based OSCs with its simple process and high performance.

• Journal of the Korean institute of surface engineering
• /
• v.48 no.4
• /
• pp.158-162
• /
• 2015

To substitute indium tin oxide (ITO), many substituents have been studied such as metal nanowires, carbon based materials, 2D materials, and conducting polymers. These materials are not good enough to apply to an electrode because theses exhibit relatively high resistance. So metal grids are required as an additionalelectrode to improve the conductivities of substituents. The metal grids were printed by electrohydrodynamic printing system using Ag nanoparticle based ink. The Ag grids showed high uniformity and the line width was about $10{\mu}m$. The Ag nanoparticles are surrounded by dispersants such as unimolecular and polymer to prevent aggregation between Ag nanoparticles. The dispersants lead to low conductivity of Ag grids. Thus, the sintering process of Ag nanoparticles is strongly recommended to remove dispersants and connect each nanoparticles. For sintering process, the interface and microstructure of the Ag grid were controlled in 1.0 torr Ar atmosphere at aound $400^{\circ}C$ of temperature. From the sintering process, the uniformity of the Ag grid was improved and the defects on the Ag grids were reduced. As a result, the resistivity of Ag grid was greatly reduced up to $5.03({\pm}0.10){\times}10^{-6}{\Omega}{\cdot}cm$. The metal grids embedded substrates containing low pressure Ar sintered Ag grids showed 90.4% of transmittance in visible range with $0.43{\Omega}/{\square}$ of sheet resistance.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07a
• /
• pp.797-798
• /
• 2005

We report a novel structure for a full-color AMOLED (Active Matrix Organic Light Emitting Diode) eliminating the patterning process of a blue emitting layer. The patterning of the three primary colors, RGB, is a key technology in the OLED fabrication process. Conventional full color AMOLED containing RGB layers includes the three opportunities of the defects to make an accurate position and fine resolution using various technologies such as fine metal mask, ink-jet printing and laser-induced transfer system. We can skip the blue patterning step by simply stacking the blue layer as a common layer to the whole active area after pixelizing two primary colors, RG, in the conventional small molecular OLED structure. The red and green pixel showed equivalent performances without any contribution of the blue emission.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.1
• /
• pp.8-13
• /
• 2016

A pattern-switchable origami antenna is designed with paper using inkjet-printing technology. The proposed antenna can be switched between loop and dipole antenna modes by folding and unfolding the paper, respectively. The proposed antenna is designed for the resonant frequencies of both modes to be 1.85 GHz. Eutectic gallium-indium liquid metal is introduced in order to avoid cracks in the conductive ink when the paper is folded. The performance of the proposed antenna is demonstrated through simulation and measurement results and antenna gain of dipole-mode and loop-mode are -4 dBi and -5 dBi, respectively. Also, the nulls of both dipole and loop modes compensate nulls from each mode.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.25 no.2
• /
• pp.124-131
• /
• 2016

Several research works for finding and optimizing the methods of dispensing high viscosity phosphor used in the fabrication of white LED's are currently in progress. High viscosity phosphor dispensing with a high accuracy is crucial because the dispensing rate and uniformity directly affect parameters such as the CIE chromaticity diagram, color temperature and luminous flux of white LED's. This study presents a novel method of dispensing high viscosity phosphor using electrohydrodynamic printing. The dispensing rate was optimized less than 0.01 mg phosphor using experiments and optimizing the process parameters including the standoff distance from the nozzle to the substrate, ink supply pressure, and multi-step pulsed waveform magnitude ratio. The dispensing rate was measured by dispensing 20 dots using drop-on-demand with the optimized parameters, and the experiments were repeated 10 times to maximize the data accuracy. The average dispensing rate that can be reliably used for high viscosity phosphor dispensing was 0.0052 mg.

• Journal of the Korean Vacuum Society
• /
• v.20 no.2
• /
• pp.146-154
• /
• 2011

The adhesive-tape of a liquid leak film sensor including the alarm system is developed. The sensing film is composed of three layers such as base film layer, conductive line layer, and protection film layer. The thickness of film is 300~500 um, the width is 3.55 cm, and the unit length is 200 m. On the conductive line layer, three conducting lines and one resistive line are formulated by the electronic printing method with a conducting ink of silver-nano size. When a liquid leaks for the electricity to be conducted between the conductive line and the resistive line, the position of leakage is monitored by measuring the voltage varied according to the change of resistance between two lines. The error range of sensing position of 200 m film sensor is ${\pm}1m$.

• Journal of Appropriate Technology
• /
• v.5 no.1
• /
• pp.46-53
• /
• 2019

It should be supported by the ease and economic production in terms of appropriate technology to be widely used in the real applying fields. In particular, the diagnosis of diseases is one of the most difficult areas to apply to the developing countries compared to other fields because of the high costs of professional manpower, equipment, and medial reagents. In recent years, paper, which is one of the most common materials around, has been used to fabricate the disease diagnostic chips, particularly without any special facilities or the equipment. These new technologies lead the possibility of using point-of-care testing devices that can be manufactured quickly in the field by lowering the production cost. These paperbased technologies will contribute to solve many of the deadliest medical problems in developing countries and ultimately improve the quality of human life.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2012.03a
• /
• pp.54-54
• /
• 2012

전통 날염방식(Silk Screen)과 디지털날염(Digital Textile Printing)을 비교해보면, 디지털날염은 디자인에서부터 날염까지의 전공정을 완전히 디지털화함으로서 다양하게 디자인할 수 있고 미묘한 색감의 흐름을 표현할 수 있어서 자연스러운 이미지의 표현이 가능하다. 그러나 현재 디지털날염을 피혁이나 직물에 적용하기에는 프린팅속도가 느려서 생산성이 낮고 이미지 내구성(세탁, 승화, 일광, 및 마찰견뢰도)이 낮은 등 많은 단점을 가지고 있다. 또한 신발산업은 현재 중국이나 동남아시아 등 개발도상국의 등장으로 수출의 국제적 경쟁시대에 접어들면서 대량생산이나 획일적인 디자인으로부터 벗어나 고부가가치 상품을 생산해야하는 과제를 안게 되었다. 한편 가죽에 응용가능한 잉크는 크게 수성, 유성, 용제형과 자외선 경화형의 잉크가 있으며 자외선 경화형 잉크는 자외선을 이용하여 기존의 잉크의 단점을 보완한 것이다. 자외선 경화형 잉크는 자외선 램프를 열원으로 하여 이온 또는 라디칼 중합, 광중합을 하며, 에너지 소비가 적어 경제적이며 시스템 가동시 비활성 기체가 필요하지 않다. 또한 자외선 경화형 기술은 상온에서 이용할 수 있으며 잉크의 경우 건조하는 데 걸리는 시간이 필요하지 않다. 또한 시스템을 가동 시키거나 중지 시키는 것이 쉬우며 고속으로 연속적인 일을 처리할 수 있다. 프린터의 크기가 작아 공간 효율이 유리하며 용제나 $CO_2$가 발생하지 않아 친환경적인 기술이라 할 수 있다. 따라서 본 연구에서는 자외선 경화형 시스템을 잉크에 적용하여 피혁 표면에 프린팅한 다음 그 견뢰도를 측정함으로써 그 효과를 알아보았다. 세탁에 의한 Matlab 측정값으로부터 용제형 잉크의 경우는 세탁 전, 후 line width가 큰 차이를 보이나 자외선 경화형 잉크의 경우는 그 차이가 적음으로부터 자외선 경화형 잉크가 용제형에 비해 색상 탈리가 적었음을 말한다. 또한 raggedness값 역시 마찬가지 결과를 보여 안료 색소와 피혁의 접착성이 향상된 것을 알 수 있다. SEM을 이용한 피혁의 표면과 단면 사진을 보면 용제형보다 자외선 경화형 잉크를 사용한 피혁이 좀 더 매끈한 표면을 보이는데 이것은 접착기능을 하는 아크릴레이트에 의해 균일한 날염이 가능하기 때문이라 고 생각된다. 이상의 결과로부터 자외선 경화형 잉크가 세탁, 마찰, 일광 견뢰도가 우수함을 알 수 있었으며 기존의 용제형 잉크를 대체할 수 있는 좋은 재료라고 생각된다.

• Journal of the Korean Ceramic Society
• /
• v.39 no.12
• /
• pp.1143-1148
• /
• 2002

Precipitated calcium carbonate is one of the most versatile mineral fillers and is consumed in an wide range of products including paper, paint, plastics, rubber, textiles, sealants, adhesives and printing ink and can be produced by several methods. Calcium carbonate has three isomorphism; vaterite, aragonite and calcite, with numerous variations of morphology in the natural mineral or organism. Formation process of vaterite in the reaction of system $Ca(OH)_2-CH_3OH-H_2O-CO_2$ were investigated by measuring the electrical conductivity, $Ca^{2+}$ ion concentration, pH in the slurries and by means of X-ray diffraction and electron microscopic observation. It was clearly established that the reaction temperature is important variable in the carbonation process; in general over 50${\circ}C$, the vaterite was precipitated with the calcite and aragonite. SEM and XRD observations revealed that the vaterite formation could be prepared the temperature range of 40 to 50${\circ}C$ and mean size of particles in this range is controlled from 0.5 to 0.8 ${\mu}m$.