The Transactions of The Korean Institute of Electrical Engineers
/
v.65
no.5
/
pp.825-830
/
2016
The purpose of this study optimizes the conditions of PLA printing material for 3D printer. Deltabot type 3D printer is used. The ranges of printing temperature, printing speed, and infill density are $195{\sim}215^{\circ}C$, 10~70mm/sec, and 10~100% respectively. From the results of printing temperature, printing quality is almost same every printing temperature. From the results of printing speed and infill density, printing quality is excellent under 40mm/sec, and over 50% respectively. Surface roughness is $2.28{\mu}mRa$ at $205^{\circ}C$, 10mm/sec, 100%, and is $5.93{\mu}mRa$ at $205^{\circ}C$, 70mm/sec. Surface roughness is directly proportional to the printing speed, and is inversely proportional to the infill density. Objects fabricated PLA printing material adhere bed at room temperature.
Korean Journal of Computational Design and Engineering
/
v.22
no.2
/
pp.215-221
/
2017
This paper describes a method of precise estimation for printing time and material consumption which are directly related to the 3D printing cost. Printing process and head motion of 3D printers using digital printing head, which is analyzed by its digitized steps, is rapidly simulated without slicing to calculate estimated printing results. Using this method, printing time and material usage of 3D printer were estimated quickly and precisely and compared to the real printing result. Applying compensation using the printing parameters, transferred from the 3D printer to the printing estimation system, even more accurate estimation is achieved. This method is used in the 3D Sprint software.
Kim C.H.;Ryu B.S.;Lim K.J.;Lee M.H.;Lee T.M.;Youn S.N.;Choi B.O.
Proceedings of the Korean Society of Precision Engineering Conference
/
2006.05a
/
pp.583-584
/
2006
Printing technology has begun to get into the spotlight in many ways due to the low cost effectiveness to existent semi-conductor process. It also has very useful application areas, not only paper printing but also patterning for LCD color tilter, Photovoltaic patterning, RFID antenna, OLED, and so on. In this study, an apparatus of gravure offset printing was developed for fine line width printing. The pattern was composed of $20{\mu}m$ size of continuous lines of which pitch size was $40{\mu}m$. The printed pattern shows that it is possible to make around $20{\mu}m$ line-width printing pattern. The roll-to-roll printing system for fine line-width printing based on primary experiment is presented. For testing of multi-layer printing, the system was designed to be capable of printing two different materials from each printing unit using gravure-offset printing method and have a function of alignment of two printed materials.
Journal of the Korean Graphic Arts Communication Society
/
v.30
no.3
/
pp.1-11
/
2012
According as the latest printing technology is converted from analogue to digital, life cycle of a printing technology is shortened and the existent printing companies were faced always in a new technology. Specially, way of foreign countries export opened because globalization of printing market is accelerated. But, printing buyers of advanced nation require standard printing process control. fect at product process step. Emphasized in IPA technical conference for past several years tendency about graphic art color proofing and technical analysis and comparison going through Color Proofing RoundUP. These researchers have developed a color management technology. A specially developed printing technology and reference characterization data brought certain high quality elevation in a graphic art proofing technology. When excessive GCR method application supervise printing, width of color conversion necks by requiring a lot of color conversions than proofing. But, these point is lacking relatively than a lot of effects that GCR gives. Therefore, correct interests of GCR algorithm and verification step to forecast beforehand result about actuality application are positively necessary. Therefore, this research forced into input file which is applied with different levels from input to print for printing optimization that consider standard printing with eco-friendly by method to solve these problem. And experimented using manuscript who GCR level is applied as is different in each field, and analyzed the result. Also, it is verification method by step to last printing from input file that solve been the various quality who generate in actuality field through these analysis result. ICC color management confirmed printing optimization process applying GCR algorithm improved to base.
Journal of Korean Society of Occupational and Environmental Hygiene
/
v.7
no.1
/
pp.71-85
/
1997
The purpose of this study was to evaluate concentrations of organic solvent mixtures in air of rotogravure printing workplaces. Qualitative and quantitative analysis of organic solvents contained in the gravure inks used at rotogravure factories had been done. The results obtained were as follows: 1. The gravure inks mainly consist of toluene, methyl ethyl ketone(MEK), and ethyl acetate(EA), and traces of isopropyl alcohol(IPA), xylene, 2-butanol, cyclohexane, cellosolve etc were also contained in them. 2. Thinner used as a diluent consist of toluene, MEK, and EA. 3. Geometric mean concentration of toluene in ambient air were 23.81 ppm at gravure printing of packing material, 42.10 ppm at gravure printing of wallpaper, 16.95 ppm at gravure printing of plastic bottle for beverage and 4.31 ppm at gravure printing of plywood printing or floor covering. Concentrations of toluene in ambient air showed statistically significant difference between types of printing. 4. Concentrations of MEK in ambient air were 12.43 ppm at gravure printing of packing material, 5.47 ppm at gravure printing of wallpaper, 16.78 ppm at gravure printing of plastic bottle for beverage and 16.44 ppm at gravure printing of plywood printing or floor covering. MEK concentrations in ambient air showed no significant difference. 5. Conentrations of EA were 14.30 ppm at gravure printing of packing material, 1.92 ppm at gravure printing of wallpaper and 21.12 ppm at gravure printing of plywood printing or floor covering. EA concentrations in ambient air shown significant difference. 6. Percentage of the workplaces where the ambient air concentration of organic solvent mixtures exceeded the Korean Permissble Exposure Level(KPEL) amounted to 18.03%. 7. Toluene concentrations in ambient air of rotogravure printing workplaces ranged from 0.69 to 156.02 ppm and urinary hippuric acid excretion ranged from 0.10 to $1.32g/{\ell}$.
Journal of the Korean Graphic Arts Communication Society
/
v.20
no.2
/
pp.45-56
/
2002
In these day, our life has been developed with the computer. Printing Industry was introduced the information industry as computer, internet, etc. These are now in daily use and covers the entire work flow - from the planing of the product and the production at domestic printing industry. Then, I suggest the correspondence of changing printing work flow, understanding of digital printing technique, rearing of a special line of business, adjustment in the environment changing of printing technique etc. for the purpose of development of domestic printing industry.
"Printing is an Art of reproduction & a Technique of However printing has extended its limitation from a genre of reproduction itself and now it stands on the turning point as an art such as painting or sculpture which expresses artist's originality. Early Printing has had relations in depth with press printing in terms of information recording, preservation, and transmission. It was acknowledged value in a way of information satisfaction different from how it is valued as a pure art today. But, later printing has transferred its function from a mean of reproduction to pure art due to the development of printing skills and photography invention. It can be said that the concept of modern printing is taking over its genealogy as a creative work not as just printing. Also its expression capability is widen to dimensional printing and high-tech multimedia from original tradition techniques. As we discussed above, modern painting is very open to various changes. This modern painting aspect can be seen as an extended interpretation of 'board' concept. This dissertation raises a question why monotype and monoprint couldn't secure its position in printing history in spite of numerous artists' tryouts in its way. Monotype and monoprint fundamentally based on intaglio technique in its history. Yet, its systematic study hasn't been worked out. This is because of the lack of recognition of monotype and monoprint's originality as printing. Especially in monoprint, it has known as an early stage in copperplate printing process which is an attempt to solve the technique limitation or trial work for edition. Likewise the reason why monotype and monoprint remains at the edge of printing border ambiguously is because of conceptual, technical characteristics which are against traditional printing. In traditional printing, the concept of board is important as a method of reproduction. Different from the fact, monotype and monoprint accept the form of medium 'board' conceptually out of limited condition as mentioned. Thus monotype and monoprint hasn't stand out for several reasons until late 20th century when it started come out to public as people starts to have interests that works from famous artists are actually based on monotype and monoprint. This dissertation likes to step into the monotype and monoprint theoretically which is not well known in domestic and try to study the meaning of monotype and monoprint as a printing medium which is also hasn't been considered sincerely. For this study the process follow as below. First, look into how monotype and monoprint has a concept and history. Next, check differences through comparison with traditional printing and how printing can be understood in what aspects at the same time. After, verify how monotype and monoprint have influence on the acceptance of extended concept of 'board'. This study will show the expressional possibility of monotype and monoprint which has already known as 'tableau printing' in today's situation where adventurous experiments of printing medium are going on with the development of technology.
Proceedings of the Materials Research Society of Korea Conference
/
2009.05a
/
pp.15.2-15.2
/
2009
Manufacturing of printed electronics using printing technology has begun to get into the hot issue in many ways due to the low cost effectiveness to existing semi-conductor process. This technology with both low cost and high productivity, can be applied in the production of organic thin film transistor (OTFT), solar cell, radio frequency identification (RFID) tag, printed battery, E-paper, touch screen panel, black matrix for liquid crystal display (LCD), flexible display, and so forth. The emerging technology to manufacture the products in mass production is roll-to-roll printing technology which is a manufacturing method by printings of multi-layered patterns composed of semi-conductive, dielectric and conductive layers. In contrary to the conventional printing machines in which printing precision is about $50~100{\mu}m$, the printing machines for printed electronics should have a precision under $30{\mu}m$. In general, in order to implement printed electronics, narrow width and gap printing, register of multi-layer printing by several printing units, and printing accuracy of under $30{\mu}m$ are all required. We developed the roll-to-roll printing equipment used for printed electronics, which is composed of un-winder, re-winder, tension measurement system, feeding units, dancer systems, guide unit, printing unit, vision system, dryer units, and various auxiliary devices. The equipment is designed based on cantilever type in which all rollers except printing ones have cantilever types, which could give more accurate machine precision as well as convenience for changing rollers and observing the process.
Journal of the Korean Graphic Arts Communication Society
/
v.31
no.1
/
pp.1-14
/
2013
Screen printing is a printing method with flexible plate surface characteristics. In addition, since the appearance of electronics industry the screen printing has been demanding high quality and definition. However, Screen printing is a method for taking ink through mesh opening because screen mesh tends to restrict quality of screen printing. In particular, the biggest problem compared with other printing type is halftone reproduction characteristics. Halftone reproduction characteristics for screen printing depend on screen mesh and opening. Dot losses or dot gains are observed through various types of screen mesh because thread of screen mesh interfere with the movement of the ink. Excessive dot losses or gains can affect the tonal range. Furthermore, this problem can result in other problem such as bad contrast and gray balance. Therefore, it is an important factor to use proper screen mesh for halftone screen printing. However, domestic screen printing industry relies on worker's experience in field rather than depending on objective data although standardized specifications and optimal printing conditions are required for screen printing. For this reason, it is important to stipulate standard condition for domestic screen printing industry. Therefore, it was examined to find tonal range by mesh opening in halftone prints process of screen printing used domestic paper and ink in this study. In addition, TVI(Tone Value Increase) characteristic was observed by comparing to the manuscripts and prints of the dot area ratio. Furthermore, contrast value and gray balance were confirmed for each condition of the printout. Conditions for the proper selection of screen mesh screen for the quality of the prints were also examined, compared with the international standard of screen printing, ISO 12647-5.
Micro-fluidic chip has been fabricated by lithography process on silicon or glass wafer, casting using PDMS, injection molding of thermoplastics or 3D printing, etc. Among these processes, 3D printing can fabricate micro-fluidic chip directly from the design without master or template for fluidic channel fabricated previously. Due to this direct printing, 3D printing provides very fast and economical method for prototyping micro-fluidic chip comparing to conventional fabrication process such as lithography, PDMS casting or injection molding. Although 3D printing is now used more extensively due to this fast and cheap process done automatically by single printing machine, there are some issues on accuracy or surface characteristics, etc. The accuracy of the shape and size of the micro-channel is limited by the resolution of the printing and printing direction or layering direction in case of SLM type of 3D printing using UV curable resin. In this study, the printing direction and thickness of each printing layer are investigated to see the effect on the size, shape and surface of the micro-channel. A set of micro-channels with different size was designed and arrayed orthogonal. Micro-fluidic chips are 3D printed in different directions to the micro-channel, orthogonal, parallel, or skewed. The shape of the cross-section of the micro-channel and the surface of the micro-channel are photographed using optical microscopy. From a series of experiments, an optimal printing direction and process conditions are investigated for 3D printing of micro-fluidic chip.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.