• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.34 no.3
• /
• pp.25-31
• /
• 2002

The purpose of this study was to analyze how the fiber properties and mixing ratio of softwood and hardwood pulp affect on roundness of printed image. Softwood pulp and hardwood pulp were refined to 400 and 600ml CSF by Valley beater and handsheets of 70 g/$m^2$ basis weight were made at different mixing ratios of hardwood and softwood pulp. The roundness, dot area, and shape of the printed dot were measured by Image Analyzer. The depths and shapes of the acridine orange penetration into paper were measured by CLSM. With higher mixing ratio of hardwood pulp, the paper showed higher air-permeability and better formation, especially at lower freeness. The roundness of the printed image became better and the dot size became smaller when the amount of hardwood pulp increased. Penetration depth of acridine orange by CLSM became greater and roundness increased to real circle when the amount of hardwood pulp increased. It was thought that higher mixing ratio of hardwood fibers resulted in efficient penetration by better formation with uniform micro-pore distribution and it increased roundness. It was thought that fiber properties and mixing ratio affected the structure of paper and the shape of the printed dot. This study showed that the measurement of depth of the liquid penetration into paper without destruction and contact was feasible. Moreover, this method showed that the shape of the liquid penetration was measurable.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.5
• /
• pp.979-984
• /
• 2009

In this paper, the technique for production and encoding of new dot-type print watermark is proposed. The print watermark has characteristics similar to those of the digital watermark and function as link which change various first informations(texts, symbols, figures, etc) on the printed matter to secondary contents (sound, video, character, etc) corresponding each to informations on the printed matter. The proposed dot-type print watermark pattern is represented as $16{\times}16$ matrix in $0.4mm^2$ area and dots are printed on only 23 elements of $16{\times}16$ matrix. The size of each dot is so small(0.02mm)that it can not be seen. Because position of printed dots correspond to the position of each digit in binary notation in this paper, they are encoded easily and there are about 8,000,000 watermark patterns enough to express first information of printed matters. It was showed that the proposed print watermark patterns are recognized without difficulty by the own recognition device.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.23 no.1
• /
• pp.65-75
• /
• 2005

An accurate characterization of the display device is essential for better color matching. The calibration and characterization process in display device is needed to transform the device dependent color to the device independent color. The process of characterization performs a linearization and transforms the linearized values into the CIE XYZ tristimulus values. The purposes of this paper is to propose optimal color transformation method for accurate reproduction of original copy in display device and to explain the propriety of transformation method using specific variable for the power of gradation expression.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.38 no.2
• /
• pp.208-217
• /
• 2001

Model-based color image halftoning method using dot-pattern database is proposed for low-resolution color image printing. Dot-pattern database used in the proposed method is based on Blue-Noise Mask. The database consists of dot-patterns constructed by circular dot-overlap model according to each color value. In halftoning procedure, input color value is reproduced as the dot-pattern selected to minimize the difference between the color values of the original image and those of the printed image. Also, the contrast sensitivity function as a human visual model is used to improve the perceived quality of the printed image in dot-pattern selection. Thus, the proposed method can substantially reproduce the color values of the pixels in original image and obtain better image quality. In the experiment, the proposed method has less ΔΕ/Sub ab/ between the original image in monitor and the printed one than that of ED and BNM halftoning. This result approves that the proposed method reproduces better image quality.

• Journal of the Korean Society for Precision Engineering
• /
• v.28 no.10
• /
• pp.1123-1130
• /
• 2011

The pattern shape engraved on the gravure printing roll is one of the most important factors influencing ink transfer. This study focuses on the relations between dot geometry engraved on gravure printing roll and the ink transfer during the gravure printing process. The influence of dot width on printed patterns will be demonstrated. Results reveal that as the width of a dot on the printing roll increases, the ink transfer rate also increases. But over a certain size of width, surface uniformity began to recede. Therefore, proper dot geometry on the printing roll should be decided to guarantee good printing quality according to printing conditions and expected performance of the electronic devices.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.23 no.1
• /
• pp.53-63
• /
• 2005

The quality of the print can be specified through the quality of the coloring, the reproduction of fine structures and the range of tone values. Also, package printed quality are controlled by this points. In this paper, densitometry method was used for printed quality. By densitometry we can get the print density and the parameters of each conditions that characterize halftone printing, such as dot gain and relative printing contrast. Also, we have proposed the optimizes range of the parameters such as density, dot gain etc. to the package printed printability control.

• Journal of the Korean Society for Precision Engineering
• /
• v.32 no.9
• /
• pp.833-840
• /
• 2015

Inkjet technology is one of the commonly used technologies in the printed-electronics field. The primary issue regarding the usage of inkjet technology as a printed-electronics tool is the printing resolution; therefore, to print complicated patterns of precise dimensions, we developed software that can convert a CAD file into a bitmap image. Moreover, as a bitmap image is not comprised of physical dimensions, its resolution needs to be defined in terms of pixel distance to print a rasterized bitmap image. In this study, we investigated the effects of pixel distance and dot size on printing resolution; based on the experiment results, we concluded that the printed dot size should be used to determine the optimal pixel distance. Lastly, we also propose inkjet printing procedures for bitmap images.

• The Journal of the Korea Contents Association
• /
• v.12 no.12
• /
• pp.639-646
• /
• 2012

To analyzed the shape of Yellow Dots which appeared on the paper printed HP color laser printer, and analyzed the characteristic of Yellow Dots according to time, month, year and same printers. As a result, documents that printed in same printers had an identical Yellow Dots's shapes according to time, month, year. It was presupposed that was not embedded time and date information in HP Color LaserJet printers against Xerox, and printers which have different serial number had similar shapes but it was not identical Yellow Dots. Finally, it was found to be identical patterns in Yellow Dots of HP Color LaserJet printers used analysis. Depending on the results, it could understand HP's pattern. In the future, it will decipher patterns of Yellow Dots which have other informations to include other printer manufacturer.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.6 no.1
• /
• pp.13-39
• /
• 1988

Test colors are halftone dot printed at the rate of 10% halftone dot area by process inksblack, cyan, magenta and yellow ink. Reproduced colors are measured by the weighted-ordinate colorimetric method and the direct colorimetric method. The weighted-ordinate colorimetric method compare favorably with the direct colorimetric method, because the former has good regular changes of tristimuIus values, chromacity coordinates, excitation purities, value functions and has smaller errors of dominant and complementary wavelengths than the latter. All test colors classify with the Munsell renotation.tation.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.2 no.1
• /
• pp.1-21
• /
• 1984

Reproduced colors which are half-tone dot printed at the rate of 10, 20, 30, 100% half-tone dot area by each process ink-cyan, magenta and yellow ant at the rate of 10, 20, 30, 100% by the mean color mixing of black, cyan, magenta and yellow, are colorimetric analyzed by make use of the 1931 CIE XYZ system of color specification and matching the Munsell color system. With increased half-tone areas, 1. Yellow has ideal reflectance curve, but magneta has nonideal reflectance curve. 2. Yellow and cyan have almost standard dominant wavelengths but magenta has complementary wavelengths. 3. Yellow has higher excitation purities in primary colors, but low excitation purities in secondary and third colors. 4. Value function is decreased and generally the range of value function in chromaticity diafgram is extented. 5. The properties of black and CMY printed materials have not equality, therefore black process ink is necessery in half-tone printing process.