• 한국정밀공학회지
• /
• 제25권5호
• /
• pp.96-102
• /
• 2008

Manufacturing of printed electronics using printing technology has begun to get into the hot issue in many ways due to the low cost effectiveness to existing semi-conductor process. This technology, with low cost and high productivity, can make it possible to produce printed electronics such as TFT, solar cell, RFID Tag, printed battery, and so on. In this study, apparatus of gravure-offset printing are developed for fine line-width/gap printing and the results obtained from the apparatus shows that it is possible to make around 20 micro-meter line-width/gap printing patterns. The roll-to-roll printing system for fine line-width printing based on primary experiment is presented. The printing results obtained from the system shows around 30 micro-meter line-width/gap printing patterns.

• Journal of Information Display
• /
• 제6권3호
• /
• pp.12-17
• /
• 2005

The need for low cost, flexible, thin film transistor (TFT) display backplanes has focused attention on new processing techniques and materials. We report the development of TFT backplane technology based entirely on jet-printing, using a combination of additive and subtractive processing, to print active materials or etch masks. The technique eliminates the use of photolithography and has the potential to reduce the array manufacturing cost. The printing technique is demonstrated with both amorphous silicon and polymer semiconductor TFT arrays, and we show results of small prototype displays.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2007년도 춘계종합학술대회
• /
• pp.540-543
• /
• 2007

본 논문에서는 모바일 TFT-LCD 모듈에서 발생하는 가청잡음을 감소시키기 위한 새로운 방법을 제안한다. 또한 가청잡음에 영향을 미치는 중요 인자들을 분석하였다. 이러한 잡음원은 FPCB와 LCD 패널간의 진동 및 윈도우와 백라이트에 충전되어 있던 정전기와 같은 다양한 중요 인자들로부터 유래됨을 확인하였다. 윈도우에 충전되어 있던 정전기로 인한 잡음 수준을 분석하기 위해 윈도우가 없는 LCD 모듈과 윈도우가 있는 LCD 모듈이 동시에 평가되었다. 신뢰감이 있고 재현성이 있는 데이터를 확보하기 위해 테스트 지그 및 측정시스템을 구축하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.461-466
• /
• 2007

There has been a great interest in printing technology as a low cost and mass production method for the application of printed electronics such as printed TFT, solar cell, RFID Tag, printed battery, and so on. In this study, apparatuses of gravure-offset printing are developed for fine line-width/gap printing and examining pattern distortion occurred in gravure-offset printing process. The fine line-width/gap pattern shows that it is possible to make around 20 micro-meter line-width/gap printing patterns. Pattern distortion is modeled, and the amount and shape of the distortion are calculated by using commercial FEM code. The roll-to-roll printing system under development consists of unwinder/rewinder, two printing units, one coating unit, drying units, guiding unit, vision system, and other auxiliary devices. For multi-layer printing, the system is designed to be capable of printing two different materials.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2010년도 춘계학술발표대회
• /
• pp.19.1-19.1
• /
• 2010

The process of manufacturing printed electronics using printing technology is attracting attention because its process cost is lower than that of the conventional semiconductor process. This technology, which offers both a lower cost and higher productivity, can be applied in the production of organic TFT (thin film transistor), solar cell, RFID(radio frequency identification) tag, printed battery, E-paper, touch screen panel, black matrix for LCD(liquid crystal display), flexible display, and so forth. In general, in order to implement printed electronics, narrow width and gap printing, registration of multi-layer printing by several printing units, and printing accuracy of under $20\;{\mu}m$ are all required. These electronic products require high precision to the degree of tens of microns - in a large area with flexible material, and mass productivity at low cost. As such, the roll-to-roll printing process is attracting attention as a mass production system for these printed electronic devices. For the commercialization of this process, two basic electronic ink technologies, such as conductive ink and polymers, and printing equipment have to be developed. Therefore, this paper addressed basis design and test to develop fine patterning equipment employing the roll-to-roll printing equipment and electronic ink.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.1115-1117
• /
• 2009

Resist patterning of all layers in TFT and BM layer in CF were carried out using UV-imprinting Lithography to make a 12.1 inch TFT-LCD panel at the resolution of 1280 ${\times}$ 800 lines (125 ppi). Technical challenges and solutions for resist patterning by UV-imprinting are shown in this article.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.75-80
• /
• 2004

By the SOG (System-on-Glass) technology with excimer laser anneal process, the number of IC chips and the area of the mounted IC chips on the printed circuit board are reduced. In new circuit integrations on the glass substrate, we have developed D/A converter including the new capacitor array, amplifier comprising the original comparators and new display device with capturing images by integrated sensor into a pixel. This paper discusses the application of circuit integration of low-temperature poly-Si.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권2호
• /
• pp.1121-1124
• /
• 2007

Ink jet printing has been targeted as a key technology for OLED, TFT backplane and other organic semiconductor device fabrication. This presentation will concentrate on aspects of the IJ process, formulation design, jetting performance, interaction with the substrate and resultant printed device performance.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.194-197
• /
• 2003

The actively addressable carbon nanotube (CNT) emitters have been studied for stable and low-voltage driving field emission display (FED). The a-Si TFT and screen-printed CNT emitters were successfully integrated to fabricate the diode type active-matrix cathode and FED panel. Also, we propose a new FED architecture based on the actively controlled triode CNT emitters showing the properties of ideal triode type cathode with electron beam focusing effect.

• Journal of Information Display
• /
• 제11권2호
• /
• pp.49-51
• /
• 2010

Nanoimprint lithography (NIL) using ultraviolet (UV) rays is a technique in which unconventional lithographic patterns are formed on a substrate by curing a suitable liquid resist in contact with a transparent patterned mold, then releasing the freshly patterned material. Here, various solutions are introduced to achieve sufficient overlay accuracy and to overcome the technical challenges in resist patterning via UV imprinting. Moreover, resist patterning of all the layers in TFT and of the BM layer in CF was carried out using UV imprinting lithography to come up with a 12.1-inch TFT-LCD panel with a resolution of $1280{\times}800$ lines (125 ppi).