• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.11a
• /
• pp.578-581
• /
• 1999

Dot pattern print methods composed of a diffusion film and two prism sheets, have been generally used for backlighting systems of LCDs. However, this methods require complex structures and show high power consumption and optical loss. To improve these disadvantages of conventional backlight units, light guides using highly scattering optical transmissions (HSOT) polymer as scatters, have been introduced. In this study we analyzed multiple scattering effect in light guide by means of Monte carlo simulation based on Mie scattering theory and ray tracing method. As a result it was revealed that scattering intensity depends on the size of scatters. On the other hands, it was shown that scattering efficiency depends on the wavelength of fluorescent lamp as well as the size of scatters.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.559-560
• /
• 2006

Inkjet Printing is very attractive method for direct patterns with no masks, In order to Achieve direct printing with nano metal, It is often necessary to print them with highly concentrated Ink We research the High Concentrated silver nano ink. Formulation which has a good thermal stability and storage stability and jet stability using a ethylene glycol ether. Normally Alcohol-based inks can be sensitive But High boiling point ethylene glycol ether base Ink is creating a stable meniscus and minimum maintenance issues. We are reaching a 50~60wt% high Silver Ink using a Hydrophilic Ag Nano powder. (30~50nm)

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.13 no.4
• /
• pp.294-299
• /
• 2000

For practical application as a humidity sensor SnO$_2$thick films devices were fabricated on the refresh type electrode by screen printing method and their material and humidity sensing properties were investigated. As a function of Sb$_{2}$/O$_{3}$ addition rate grain size was increased while porosity and initial resistance were rapidly decreased. And the area of resistance variation according to relative humidity was decreased with increasing heat treatment temperature. SnO$_2$thick film device heat treated at 95$0^{\circ}C$ and contained 0.05mole% Sb$_{2}$/O$_{3}$ had a best humidity sensing properties. From this result it is conformed that humidity sensing properties of SnO$_2$thick film devices could be approved by very small amount of Sb$_{2}$/O$_{3}$ addition.

• Korean Journal of Materials Research
• /
• v.18 no.1
• /
• pp.12-17
• /
• 2008

Carbon nanotube (CNT) cathodes were fabricated using nano-sized silver (Ag) powders as a bonding material between the CNTs and cathode electrodes. The effects of the powder size on the sintering behavior, the current density and emission image for CNT cathodes were investigated. As the diameter of the Ag powders decreases to 10 nm, the sintering temperature of the CNT cathode was lowered primarily due to the higher specific surface area of the Ag powders. In this study, it was demonstrated that nano-sized Ag powders can be feasibly used as a bonding material for a screen-printed CNT cathode, yielding a high current density and a uniform emission image.

• Proceedings of the IEEK Conference
• /
• 2001.10a
• /
• pp.165-170
• /
• 2001

The main purpose of this study is to generate a fine copper oxide powder of high purity, with a compact structure and a uniform particle size by a spray pyrolysis process. The raw material is a waste copper chloride solution formed in the manufacturing process of Print Circuit Board (PCB). This study also examines the influences of various factors on the properties of the generated powder. These factors include the reaction temperature, the inflow speed of the raw material solution, the inflow speed of the air, the size of the nozzle tip, and the concentration of the raw material solution. It is discovered that, as the reaction temperature increases from 80$0^{\circ}C$ to 100$0^{\circ}C$ , the particle size of the generated powder increases accordingly, and that the structure of the powder becomes much more compact. When the reaction temperature is 100$0^{\circ}C$, the particle size of the generated powder increases as the concentration of copper in the raw material solution increases to 40g/l, decreases as the concentration increases up to 120g/l, and increases again as the concentration reaches 200g/1. In the case of a lower concentration of the raw material solution, the generated powder appears largely in the form of CuO. As the concentration increases, however, the powder appears largely in the form of CuCl. When the concentration of copper in the raw material solution is 120g/1, the particle size of the generated powder increases as the inflow speed of the raw material solution increases. When the concentration of copper in the raw material solution is 120g/1, there is no evident change in the particle size of the generated powder as the size of the nozzle tip and the air pressure increases. When the concentration is 40g/1, however, the particle size keeps increasing until the air pressure increases to 0.5kg/$\textrm{cm}^2$, but decreases remarkably as the air pressure exceeds 0.5kg/$\textrm{cm}^2$.

• Journal of the Korea Society of Computer and Information
• /
• v.23 no.9
• /
• pp.87-96
• /
• 2018

The purpose of this study was to identify the preferred materials and design characteristics of nursing home clothes in order to collect the basic data necessary for the elderly nursing home clothes. It was to utilize the elderly nursing home clothes considering elderly body shape, hand function, illness. This study was conducted by questionnaire method and SPSS ver. 20.0 program was used. The preference for nursing home clothes material was high for cotton, and it was found that they prefer soft, stretch material, warm feeling material, and lightweight material. In the hygienic aspect, they favored sweat-absorbent materials, and preferred laundry- care-resistant materials with poor wrinkles and dirtiness. The nursing home clothes preferred a two piece form consisting of a round neckline, two pockets on both sides, a waistband of rubber band, long lengths, and a waistline pants. The most important function in the nursing home clothes was recognized as wearing comfort. Aesthetics, symbolism, color and print pattern were recognized as not important functions. Therefore, it is necessary to focus on the functional part such as wearing comfort in the design of the nursing home clothes. The material is also hygienic and comfortable to wear. In the case of the elderly, it is necessary to provide convenience for the wear of clothes through the development of stretchable material and detachment device since the movement range of muscles, arms, and legs is reduced. Based on this study, we will utilize it for the development of nursing home suit considering the characteristics of elderly person in the elderly society. It is to develop functional materials for the elderly in need of nursing home, to develop the pattern considering the elderly body shape, and to develop the desorption device considering the movement of the hand.

• Current Photovoltaic Research
• /
• v.10 no.4
• /
• pp.95-100
• /
• 2022

Solar cell is a device that converts photon energy into electrical energy. Therefore, absorption of solar spectrum light is one of the most important characteristics to design the solar cell structures. Various methods have emerged to reduce optical losses, such as textured surfaces, back contact solar cells, anti-reflection layers. Here, the anti-reflection coating (ARC) layer is typically utilized whose refractive index value is between air (~1) and silicon (~4) such as SiN_x layer (~1.9). This research is to print a material called polydimethylsiloxane (PDMS) to form a double anti-reflection layer. Light with wavelength in the range of 0.3 to 1.2 micrometers does not share a wavelength with solar cells. It is confirmed that the refractive index of PDMS (~1.4) is an ARC layer which decreases the reflectance of light absorption region on typical p-type solar cells with SiN_x layer surface. Optimized PDMS printing with analyzing optical property for cell structure can be the effective way against outer effects by encapsulation.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.2430-2434
• /
• 2005

Automatic FPC punching instrument for the improvement of working condition and cost saving is introduced in this paper. FPC(flexible printed circuit) is used to detect the contact position of K/B and button like a cellular phone. Depending on the quality of the printed ink and position of reference punching point to the FPC, the resistance and current are varied to the malfunctioning values. The size of reference punching point is 2mm and the above. Because the punching operation is done manually, the accuracy of the punching degree is varied with operator's condition. Recently, The punching accuracy has deteriorated severely to the 2mm punching reference hall so that assembly of the K/B has hardly done. To improve this manual punching operation to the FPC, automatic FPC punching system is introduced. Precise mechanical parts like a 5-step stepping motor and ball screw mechanism are designed and tested and low cost PC camera is used for the sake of cost down instead of using high quality vision systems for the FA. 3D Mechanical design tool(Pro/E) is used to manage the exact tolerance circumstances and avoid design failures. Simulation is performed to make the complete vision based punching machine before assembly, and this procedure led to the manufacturing cost saving. As the image processing algorithms, dilation, erosion, and threshold calculation is applied to obtain an exact center position from the FPC print marks. These image processing algorithms made the original images having various noises have clean binary pixels which is easy to calculate the center position of print marks. Moment and Least square method are used to calculate the center position of objects. In this development circumstance, Moment method was superior to the Least square one at the calculation of speed and against noise. Main control panel is programmed by Visual C++ and graphical Active X for the whole management of vision based automatic punching machine. Operating modes like manual, calibration, and automatic mode are added to the main control panel for the compensation of bad FPC print conditions and mechanical tolerance occurring in the case of punch and die reassembly. Test algorithms and programs showed good results to the designed automatic punching system and led to the increase of productivity and huge cost down to law material like FPC by avoiding bad quality.

• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.5
• /
• pp.3131-3137
• /
• 2013

Background: Visual inspection of cervix with acetic acid (VIA) is offered at 252 centers in 64 districts of Bangladesh. VIA+ve women are managed at colposcopy clinics of Bangabandhu Sheikh Mujib Medical University (BSMMU) and 14 Medical College Hospitals (MCHs). This research work has been supported by 'UICC Cancer Prevention Campaign' programme. Objectives: This study explored the role of print materials and electronic media to improve cervical cancer screening in the present socio-cultural context of Bangladesh. Methods: This study was performed from January to August 2011 at two upazilas of Bangladesh (Singair with screening facility and Sonargaon without screening facility). Data were collected by focus group discussion (FGD) with women, husbands and community people before and after intervention. Information on cervical cancer screening and VIA camps was disseminated using advertisement through local cable line of the television, microphone announcement, service providers and leaflet throughout the week prior to a VIA camp. Three-day VIA camps were organized at the upazila health complex (UHC) of both upazilas. Quantitative data was gathered from women at the camps on source of information on VIA and the best method of awareness creation. Results: The population was aware of "cancer" and a notable number knew about cervical cancer. Baseline awareness on prevention and VIA was low and it was negligible where screening services were unavailable. Awareness was increased fourfold in both upazilas after interventions and half of the women and the majority of the community people became aware of screening and available facilities. Cable line advertisement (25.5%), microphone announcement (21.4%), and discussion sessions (20.4%) were effective for awareness creation on VIA. Television was mentioned as the best method (37.4%) of awareness creation. Conclusion: Television should be used for nation-wide awareness creation. For local awareness creation, cable line advertisement, microphone announcements and health education at Uthan Baithaks/ EPI sessions can easily be adopted by the government.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.20 no.2
• /
• pp.47-62
• /
• 2018

This study examined recycled fashion design utilizing natural images for application to recent trends. This study is significant in that it presents the possibility of the development of recycled women's wear design by reflecting the characteristics and expressions of natural images and using denim material, which is the most common clothing material for everyday life. The results of this study are summarized as follows. First, five types of women's clothing was produced, pursuing a natural design with a soft and feminine silhouette. Second, the colors used were blue and white, which could represent nature. Third, as for materials, this study used clothing that was to be thrown away: four pairs of denim pants and two denim dresses. This study chose denim cloth, with its great value for reuse, because of the characteristics of the strong and durable fiber, because everyone has more than one article of clothing made from denim and because it can be easily sourced. Fourth, for textile motifs, this study expressed a peaceful natural scenery with tropical animals and plants. In addition, this study further emphasized natural images using transfer media printing. This study has significance in that it presented the possibility of recycled fashion design and expanded the range of utilization using transfer media printing, a dyeing treatment to reduce the environmental burden.