• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.38 no.5 s.118
• /
• pp.47-53
• /
• 2006

To meet the ever increasing quality demand of coated papers and duplex boards, the local gloss variation and print unevenness must be avoid. To do this, surface roughening phenomenon which affects local gloss and print unevenness was investigated. In this study, the effect of roughness and densification of sheet obtained at various calendering conditions on surface roughening was examined. To evaluate the calendering effect properly we introduced a new value of roughening index by moisture for evaluation of surface roughening. Caliper and roughness of sheet decreased with increasing of calendering temperature and pressure, and the remarkable reduction of those properties occurred at the temperature around Tg. Roughening index increased when the amount of water increased and calendaring temperature and pressure increased. And as the sheet became denser by calendering, the roughening index increased to some extent. But roughening index by moisture is the lowest for sheet precalendered at higher temperature condition. When the surface of calendered sheet is rougher, there is more roughening of surface. The severe condition of calendering made the roughening index by moisture small.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.16 no.2
• /
• pp.75-89
• /
• 1998

FM screening has been praised for its apparent resolution advantage over conventional AM screening. FM screening is also known for its criticalness of film output and difficulties in the proofing stage because of the microdot formation. However, FM screening is not a well understood process from press performance point of view. This study was carried out for the purposes of introducing the availability of hifi-offset printing to domestic printing industries and evaluating the print qualities between 300lpi AM screen and FM screen with the equivalent sized microdots to 4-5% dot area of the 300lpi AM screen, together with comparing with 175lpi AM screen representing a conventional printing. Solid density, dot gain, color gamut and some other quality properties were measured and discussed.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.34 no.4
• /
• pp.16-21
• /
• 2002

It was observed that drying temperature and curing time in the paper coating process as well as Tg of the latex used as a binder, greatly affected the properties of the coated paper such as roughness, paper and print gloss, K & N ink drop, and ink set-off. The higher drying temperature induced faster water evaporation and change in binding density, which caused an increase in paper roughness, ink gloss and ink set-off, but decrease in paper gloss and K & N ink drop. The increased curing time promoted latex filming and redistribution of the binder in coating layer. This increased pick strength and ink gloss, but decreased ink trapping. Finally, the higher Tg of the latex showed the wider changing range of these properties.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.38 no.4 s.117
• /
• pp.24-30
• /
• 2006

Formation which is an indicator of nonuniformity in fiber distribution is concerned with small scale variation in roughness, optical properties, print density, and so on. This study evaluated the formation of sheets which were made usning handsheet former and paper-machine with hydraulic headbox. Optical method and ${\beta}-ray$ method were used for formation test. The fiber type, freeness and basis weight of sheet were considered as variables. The formation of handsheet was affected by fiber type and freeness, and floe size distribution was influenced by basis weight. For machine made sheet, its formation seemed to be dependent on the hydraulic forces in headbox and former. When two formation test methods were compared, there was the highest relationship between optical formation index and normalized standard deviation from ${\beta}-ray$ method.

• Proceedings of the Korean Printing Society Conference
• /
• 2007.11a
• /
• pp.1-12
• /
• 2007

The rheological properties of an ink relate to its performance on the press and to the printing quality. So it is necessary to analyze the relationship between printability and the rheological properties of ink. Transfer rate of ink is one of the important factor deciding print quality. And it is concerned with rheological properties of ink. Thus, in this study, according to the molecular weight of rosin modified phenolic resin the rheological properties of ink were measured by rotational rheometer and then transfer equation of ink, density and gloss were mesured in order to examine the printability of ink.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.23 no.1
• /
• pp.13-25
• /
• 2005

In order to technical analysis of the Newspaper printing press, the printability such as, dot gain, contrast and printing density change according to the amount of ink and damping water feeding were experimented. t도 Printability assurance in printing aims at a correct and constant color reproduction throughout the whole print-run. And the checked values were checked from densitometer and colorimeter instead of conventional subjective method. In this research, we could propose the range of driving in printing of domestic Newspaper printing press as well as the limits of ink feed speed and damping water feed speed.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.22 no.2
• /
• pp.1-12
• /
• 2004

In lithography based on repulsion of ink and water emulsification is inevitably generated. Thus it is necessary to analyze relationship between printability and physical and chemical properties of emulsified ink. Transfer rate of ink is one of the important factor deciding print quality. And it is closely concerned with rheological properties of emulsified ink. Rheological properties such as flow, yield, plastic viscosity, creep, oscillation and tack tests were measured. In order to examine printability of emulsified ink, ink transfer equations, density, ink film thickness and gloss were measured.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.16 no.3
• /
• pp.109-120
• /
• 1998

FM screening has been praised for its apparent resolution advantage over conventional AM screening. FM screening is also known for its criticalness of film output and difficulties in the proofing stage because of the microdot formation. However, FM screening is not a well understood process from press performance point of view. This study was carried out for the purposed of introduction the availability of hifi-offset printing to domestic printing industries and evaluating the print qualities between 300pli AM screen and FM screen with the equivalent sized microdots to 4-5% dot area of the 300lpi AM screen, together with comparing with the 175lpi AM screen representing a conventional printing. Solid density, dot gain, color gamut and some other quality properties were measured and discussed.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.25 no.2
• /
• pp.1-13
• /
• 2007

The rheological properties of an ink relate to its performance on the press and to the printing quality. So it is necessary to analyze the relationship between printability and the rheological properties of ink. Transfer rate of ink is one of the important factor deciding print quality. And it is concerned with rheological properties of ink. Thus, in this study, according to the molecular weight of rosin modified phenolic resin the rheological properties of ink were measured by rotational rheometer and then transfer equation of ink, density and gloss were measured in order to examine the printability of ink.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08a
• /
• pp.486-489
• /
• 2007

Carbon nanotube (CNT) cathodes having a trench structure similar to the structure of the gated triodetype cathode were successfully fabricated by a screenprinting method with multi-walled carbon nanotubes. We observed that a liquid method not only readily removes the organic residues on the CNT films, but also satisfactorily protrudes the CNTs out of the electrode surface. The CNT cathodes prepared by the liquid method showed a turned-on field of $1.4\;V/{\mu}m$. The emission current density of them was about $3.1\;mA/cm^2$ at the electric field of $3\; V/{\mu}m$. The liquid method appears to be a promising surface treatment of CNT cathode for gated triode-type FEDs applications.