• 한국신뢰성학회지:신뢰성응용연구
• /
• 제16권2호
• /
• pp.98-103
• /
• 2016

Purpose: The purpose of this paper is to get a meaningful information for improving manufacturing quality of the products before they are produced in client's manufacturing process. Methods: A variety of data mining techniques have been being used for wide range of industries from process data in manufacturing factories for quality improvement. One application of those is to get meaningful information from process data in manufacturing factories for quality improvement. In this paper, the failure rate at client's manufacturing process is predicted by using the parameters of the characteristics of the product based on PCA (Principle Component Analysis) and regression analysis. Results: Through a case study, we proposed the predicting methodology and regression model. The proposed model is verified through comparing the failure rates of actual data and the estimated value. Conclusion: This study can provide the guidance for predicting the failure rate on the manufacturing process. And the manufacturers can prevent the defects by confirming the factor which affects the failure rate.

• 수산경영론집
• /
• 제14권2호
• /
• pp.1-14
• /
• 1983

This paper considers a classification of the 88 islands located at Kyong-nam area in Korea, using by examples of 12 components of the islands. By means of principal component analysis 2 principle components were extracted, which explained a total of 73.7% of the variance. Using an eigen variable criterion (λ>1), no further principle components were discussed. Principal component 1 and 2 explained 63.4% and 10.3% of the total variance respectively, The representation of the unrelated factor scores along the first and second principal axes produced a new information with respect to the classification of the islands. Based upon the representation, 88 islands were classified into 6 groups i. e. A, B, C, D, E, and F according to similarity of the components among them in this paper. The "Group F" belongs to a miscellaneous assortment that does not fit into the logical category. category.

• 응용통계연구
• /
• 제26권6호
• /
• pp.933-942
• /
• 2013

본 연구에서는 시뮬레이션 방법을 사용해서 다양한 조건에서 주성분분석이 얼마나 잘 요인 구조를 복원할 수 있는지를 공통요인분석과 비교하여 체계적으로 평가하였다. 이 연구에서 요인 대 변수 비율, 공통성, 그리고 표본크기를 실험변수로 설정하였다. 주성분분석은 표본의 크기가 200개 이하인 경우 공통적으로 공통요인분석에 비해 더 우수한 요인구조의 복원력을 보여주었다. 특히, 요인 당 변수 수가 적은 경우, 주성분분석은 50개의 표본에서도 만족할 만한 수준의 요인복원능력을 보여주었다. 이와 더불어 공통성 수준 또한 낮은 경우 필요한 표본수는 100개로 늘어난다. 본 연구결과는 요인추출방법으로서 주성분분석의 선택의 근거를 제시하고 타당한 사용에 관한 가이드라인을 제시해 준다.

• 대한산업공학회지
• /
• 제38권4호
• /
• pp.254-257
• /
• 2012

Hedge funds can be established in Korea after the deregulation about setting up private equity funds on September, 2011. Although the variety of asset allocation strategies is the strength of hedge funds, most of Korean hedge funds uses only the equity long/short strategy. Therefore, it is need to introduce other strategies into Korea hedge funds, however all strategies can not be adopted at once because of the infrastructure of Korea financial market. In this paper, we find the optimal introductive order of strategies for Korea hedge fund in view of individual or institutional investors. For this analysis, HFRI data are used for the historical return of each hedge fund strategy and three methods (network visualization, principle component analysis and efficient frontier optimization) are used for finding the optimal order.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2005년도 Proceedings of ISRS 2005
• /
• pp.370-373
• /
• 2005

We have developed Hybrid algorithm for yellow sand detection. Hybrid algorithm is composed of three methods using infrared bands. The first method used the differential absorption in brightness temperature difference between $11\mu m\;and\;12\mu m$ (BID _1), through which help distinguish the yellow sand from various meteorological clouds. The second method uses the brightness temperature difference between $3.7\mu m\;and\;11\mu m$ (BID_2). The technique would be most sensitive to dust loading during the day when the BID _2 is enhanced by reflection of $3.7\mu m$ solar radiation. The third one is a newly developed algorithm from our research, the so-called surface temperature variation method (STY). We have applied the three methods to MODIS for derivation of the yellow sand dust and in conjunction with the Principle Component Analysis (PCA), a form of eigenvector statistical analysis. PCI shows better results for yellow sand detection in comparison with the results from individual method. The comparison between PCI and MODIS aerosols optical depth (AOD) shows remarkable good correlations during daytime and relatively good correlations over the land.

• Environmental Engineering Research
• /
• 제15권2호
• /
• pp.93-98
• /
• 2010

This study aims to determine the chemical composition and seasonal variation of atmospheric acid deposition in order to identify possible sources contributing to precipitation. Sampling and analysis of 132 wet deposition samples were carried out from January to December 2008 at Mae Hia Research Center, Chiang Mai University, Chiang Mai Province. Total precipitation was 1,286.7 mm. Mean electro-conductivity and pH values were 0.94 mS/m and 6.27, respectively. Major cations ($Na^+$, ${NH_4}^+$, $K^+$, $Ca^{2+}$, and $Mg^{2+}$) and major anions ($HCOO^-$, $CH_3COO^-$, $Cl^-$, ${NO_3}^-$, and ${SO_4}^{2-}$) were determined by Ion Chromatography. The relative volume weight mean concentrations of anions, in descending order, were ${SO_4}^{2-}$ > ${NO_3}^-$ > $Cl^-$ > $CH_3COO^-$ > $HCOO^-$ and those of cations were $NH_4^+$ > $Ca^{2+}$ > $Mg^{2+}$ > $K^{+}$ > $Na^+$. Results of a principle component analysis highlighted the influence of various possible sources of ions such as agricultural activity, fuel combustion, marine sources, soil resuspension, and biomass burning.

• 대한원격탐사학회지
• /
• 제22권5호
• /
• pp.403-406
• /
• 2006

An algorithm for detection of yellow sand aerosols has been developed with infrared bands. This algorithm is a hybrid algorithm that has used two methods combined. The first method used the differential absorption in brightness temperature difference between $11{\mu}m\;and\;12{\mu}m\;(BTD1)$. The radiation at $11{\mu}m$ is absorbed more than at $12{\mu}m$ when yellow sand is loaded in the atmosphere, whereas it will be the other way around when cloud is present. The second method uses the brightness temperature difference between $3.7{\mu}m\;and\;11{\mu}m(BTD2)$. This technique is sensitive to dust loading, which the BTD2 is enhanced by reflection of $3.7{\mu}m$ solar radiation. First the Principle Component Analysis (PCA), a form of eigenvector statistical analysis from the two methods, is performed and the aerosol pixel with the lowest 10% of the eigenvalue is eliminated. Then the aerosol index (AI) from the combination of BTD 1 and 2 is derived. We applied this method to Multi-functional Transport Satellite-l Replacement (MTSAT-1R) data and obtained that the derived AI showed remarkably good agreements with Ozone Mapping Instrument (OMI) AI and Moderate Resolution Imaging Spectroradiometer (MODIS) aerosol optical depth.

• Korean Chemical Engineering Research
• /
• 제46권2호
• /
• pp.233-247
• /
• 2008

공정 모니터링 기술은 공정 내에서 일어나는 예상치 못한 조업변화 및 이상을 조기에 감지하고 조업 이상에 영향을 끼친 근본 원인을 밝혀내어 제거해 줌으로써 공정의 안정적인 조업과 양질의 제품생산의 기반을 제공하여 준다. 데이터에 기반한 통계적 공정 모니터링 방법은 양질의 공정 데이터만 주어진다면 통계적 처리를 접목하여 비교적 쉽게 모니터링을 할 수 있고 공정의 데이터 분석에 이용할 수 있는 도구를 얻을 수 있다는 장점이 있다. 그러나 실제 공정에서는 비선형성, non-Gaussianity, 다중 운전모드, 공정상태변화로 인해 기존의 다변량 통계적 방법을 이용한 공정 모니터링 기법은 비효율적이거나, 공정 감시 성능의 저하, 종종 신뢰할 수 없는 결과를 야기한다. 이러한 경우 기존의 방법으로는 더이상 공정을 정확히 감시할 수 없기 때문에 최근에 많은 새로운 방법들이 개발 되었다. 본 총설에서는 이러한 단점을 보안하기 위해 최근 주목할 만한 연구결과인 공정 비선형성을 고려한 커널주성분분석(kernel principle component analysis) 모니터링 기법, 주성분분석 모델 조합을 이용한 다중모델(mixture model) 모니터링 기법, 공정 변화를 고려한 적응모델(adaptive model) 모니터링 기법, 그리고 센서 이상진단과 보정의 이론과 응용결과에 대하여 소개한다.

• 비파괴검사학회지
• /
• 제24권6호
• /
• pp.590-596
• /
• 2004

신경망 기반의 신호 분류 시스템은 비파괴 검사 시 추출되는 많은 양의 데이터를 처리하기 위한 방법으로 꾸준히 이용되고 있다. 비파괴검사 방법 중, 초음파 탐상법은 용접 지역에서 결함들을 찾기 위하여 비파괴 검사에서 일반적으로 사용되고 있는 추세다. 초음파 탐상법의 중요한 특징은 특정 신호에서 발생하는 불연속성을 판별해내는 능력이다. 지금까지의 보편화되어 있는 기술은 신호를 분류하기 위해 각각의 A-scan 신호를 처리하는 반면 본 논문에서는 이웃하는 A-scan 신호의 정보를 기반으로 하는 2차원 푸리에 변환(Fourier transform)과 주성분 분석(principal component analysis) 기법을 이용하여 특징 벡터를 추출, 분류하는 방법을 제시하고자 한다.

• 한국정밀공학회지
• /
• 제20권11호
• /
• pp.23-31
• /
• 2003