• Computers and Concrete
• /
• v.23 no.6
• /
• pp.421-431
• /
• 2019

The alarming rate of depletion of natural stone based coarse aggregates is a cause of great concern. The coarse aggregates occupy nearly 60-70% by volume of concrete being produced. Research efforts are on to look for alternatives to stone based coarse aggregates from sustainability point of view. Response surface methodology (RSM) is adopted to study and address the effect of ferrochrome slag (FCS) replacement to coarse aggregate replacement in the ordinary Portland cement (OPC) based concretes. RSM involves three different factors (ground granulated blast furnace slag (GGBS) as binder, flyash (FA) as binder, and FCS as coarse aggregate), with three different levels (GGBS (0, 15, and 30%), FA (0, 15, and 30%) and FCS (0, 50, and 100%)). Experiments were carried out to measure the responses like, workability, density, and compressive strength of FCS based concretes. In order to optimize FCS replacement in the OPC based concretes, three different traditional optimization techniques were used (grey relational analysis (GRA), technique for order of preference by similarity (TOPSIS), and desirability function approach (DFA)). Traditional optimization techniques were accompanied with principal component analysis (PCA) to calculate the weightage of responses measured to arrive at the final ranking of replacement levels of GGBS, FA, and FCS in OPC based concretes. Hybrid combination of PCA-TOPSIS technique is found to be significant when compared to other techniques used. 30% GGBS and 50% FCS replacement in OPC based concrete was arrived at, to be optimal.

• SUVANNABHUMI
• /
• v.13 no.2
• /
• pp.167-186
• /
• 2021

The Grand Stupa is mentioned in historical text as 'Rajakudakan', which means a royal building with a multitiered superstructure. This Grand Stupa is the principal construction of Wat Chedi Luang, and marks the center of the Chiang Mai City Plan. This study argues that the Grand Stupa was built in 1391 during Phaya Saen Mueang Ma's reign, possibly inspired by the construction of Ku Phaya in Bagan. Thereafter, in 1545, the Grand Stupa's superstructure collapsed after the great earthquake, resulted in the irreparable damage since then. Therefore, a survey using a 3D laser scanner is conducted to collect the most precise data on the current condition of the Grand Stupa, yielding an assumption of its reconstruction. Other simultaneous stupas or those that show a close architectural relationship (e.g. stupas in Wat Chiang Man and Wat Lok Moli and the stupa of King Tilokaraj in Wat Chet Yot in Chiang Mai) are also employed as research frameworks for the reconstruction. As a result, the architectural research on the Grands Stupa, compared with simultaneous stupas, yields a fruitful argument that the pre-collapse superstructure form of the Grand Stupa marks the most architectural similarity to the stupa of Wat Chiang Man.

• Geomechanics and Engineering
• /
• v.29 no.6
• /
• pp.615-626
• /
• 2022

The soft clays are widely distributed, and one of the prominent engineering problems is the creep behavior. In order to predict the creep deformation of soft clays in an easier and more acceptable way, a simple creep constitutive model has been proposed in this paper. Firstly, the triaxial creep test data indicated that, the strain-time (𝜀-t) curve showing in the 𝜀-lgt space can be divided into two lines with different slopes, and the time referring to the demarcation point is named as t_EOP. Thereafter, the strain increments occurred after the time t_EOP are totally assumed to be the creep components, and the elastic and plastic strains had occurred before t_EOP. A hyperbolic equation expressing the relationship between creep volumetric strain, stress and time is proposed, with several triaxial creep test data of soft clays verifying the applicability. Additionally, the creep flow law is suggested to be similar with the plastic flow law of the modified Cam-Clay model, and the proposed volumetric strain equation is used to deduced the scaling factor for creep strains. Therefore, a creep constitutive model is thereby established, and verified by successfully predicting the creep principal strains of triaxial specimens.

• Journal of Distribution Science
• /
• v.20 no.6
• /
• pp.67-74
• /
• 2022

Purpose: In the current era of rapid development of the information and communication technologies (ICT) sector, the formation of an effective regulatory approach is important. There are some methodological shortcomings and difficulties in the approach system of international organizations that assesses the level of application of ICT in various areas in terms of quantity and quality. The basic element of economic growth differs according to the economic conditions prevailing in the period and the country. While the agricultural sector plays an active role in economic growth or development in an underdeveloped country, in a developed country, capital-intensive and even technology-intensive production is the main element of economic growth. From this point of view, the contribution of information and communication technologies (ICT) to Azerbaijan's socio-economy for the period between 2010-2020 will be examined. Research design and methodology: The unit root test and Granger causality test were applied by taking the CDPPC per Capita, Employment, and Unemployment Rate from the social-o-economic data as the dependent variable, fixed and mobile phone usage and internet usage as the independent variables. The principal results: According to the results obtained; It has been determined that the use of ICT positively affects the socio-economic economic situation.

• Advances in Computational Design
• /
• v.9 no.1
• /
• pp.39-52
• /
• 2024

If the governing differential equation arising from engineering problems is treated as an analytic, continuous and derivable function, it can be expanded by one point as a series of finite numbers. For the function to be zero for each value of its domain, the coefficients of each term of the same power must be zero. This results in a recursive relationship which, after applying the natural conditions or the boundary conditions, makes it possible to obtain the values of the derivatives of the function with acceptable accuracy. The elastoplastic analysis of an inhomogeneous thick sphere of metallic materials with linear variation of the modulus of elasticity, yield stress and Poisson's ratio as a function of radius subjected to internal pressure is presented. The Beltrami-Michell equation is established by combining equilibrium, compatibility and constitutive equations. Assuming axisymmetric conditions, the spherical coordinate parameters can be used as principal stress axes. Since there is no analytical solution, the natural boundary conditions are applied and the governing equations are solved using a proposed new method. The maximum effective stress of the von Mises yield criterion occurs at the inner surface; therefore, the negative sign of the linear yield stress gradation parameter should be considered to calculate the optimal yield pressure. The numerical examples are performed and the plots of the numerical results are presented. The validation of the numerical results is observed by modeling the elastoplastic heterogeneous thick sphere as a pressurized multilayer composite reservoir in Abaqus software. The subroutine USDFLD was additionally written to model the continuous gradation of the material.

• The Journal of KAIRB
• /
• v.2 no.1
• /
• pp.23-31
• /
• 2020

Purpose: To obtain opinions from Korean Institutional Review Board (IRB) members' self-evaluation on ability to conduct fairness review of clinical trial protocol with presence of conflict of interest and from investigators and IRB members on financial conflict of interest through surveying. Methods: IRB members and researchers in 9 different hospitals were asked to answer survey questions via email. Results: Responders were 115 personnel (IRB Chair/vice 18, medical member 30, non-medical member 28, and researcher 39) from 9 centers. Compared to IRB medical members, IRB chair/vice respondents scored higher with statistically significance on 10 point scale (8.44±1.381 vs. 7.30±1.685, p=0.005) when asked to self-evaluate fairness reviewing a protocol proposed by an investigator from the same department and a protocol from the company that supports the scientific committee of responders. When reviewing a protocol proposed by a hospital director, non-medical members scored statistically significantly higher than medical-members (7.47±1.76 vs. 8.07±2.70, p=0.034). When asked about the limitation of labor fee for principal investigator on phase 3 Human clinical trials of the Investigational new drug, while the responses range was wide, 60% answered that labor cost of principal investigator should be less than 30% of total budget for clinical trials with a budget of 100 million won. 51.3% answered that there is no need to disclose the labor cost of the principal investigator in the consent form. Since every investigator can be influenced unconsciously by conflict of interest, the answer that 'responder agrees that there is need for management' was the most chosen answer (IRB member 61.8%, investigator 64.1%, multiple answers allowed). Conclusion: Considering scores on questions of fairness by IRB members were between 7.23-8.56 on scale of 0 to 10 point when IRB members were asked about reviewing a clinical trial protocol, it cannot be said with absolute certainty that there is no issue regarding fairness in the review process. Therefore, there should be more ways to safeguard fairness for these issues. There is a need that the disclosure amount of honorarium from sponsor should be lower than 100 million Korean won. Considering the results of the survey in which respondents expressed their thoughts, it is likely that more education on the concept of conflict of interest is needed.

• Journal of Korean Society of Forest Science
• /
• v.77 no.4
• /
• pp.429-444
• /
• 1988

Considering the recent trent toward the development of multiple-use of forest trees, investigations for comprehensive information on these young stands of Hinoki cypress are necessary for rational forest management. From this point of view, 83 sample trees were selected and cut down from 23-ear old stands of Hinoki cypress at Changsung-gun, Chonnam-do. Various stem growth factors of felled trees were measured and canonical correlaton analysis, principal component analysis and factor analysis were applied to investigate the stem growth characteristics, relationships among stem growth factors, and to get potential information and comprehensive information. The results are as follows ; Canonical correlation coefficient between stem volume and quality growth factor was 0.9877. Coefficient of canonical variates showed that DBH among diameter growth factors and height among height growth factors had important effects on stem volume. From the analysis of relationship between stem-volume and canonical variates, which were linearly combined DBH with height as one set, DBH had greater influence on volume growth than height. The 1st-2nd principal components here adopted to fit the effective value of 85% from the pincipal component analysis for 12 stem growth factors. The result showed that the 1st-2nd principal component had cumulative contribution rate of 88.10%. The 1st and the 2nd principal components were interpreted as "size factor" and "shape factor", respectively. From summed proportion of the efficient principal component fur each variate, information of variates except crown diameter, clear length and form height explained more than 87%. Two common factors were set by the eigen value obtained from SMC (squared multiple correlation) of diagonal elements of canonical matrix. There were 2 latent factors, $f_1$ and $f_2$. The former way interpreted as nature of diameter growth system. In inherent phenomenon of 12 growth factor, communalities except clear length and crown diameter had great explanatory poorer of 78.62-98.30%. Eighty three sample trees could he classified into 5 stem types as follows ; medium type within a radius of ${\pm}1$ standard deviation of factor scores, uniformity type in diameter and height growth in the 1st quadrant, slim type in the 2nd quadrant, dwarfish type in the 3rd quadrant, and fall-holed type in the 4 th quadrant.

• Journal of Environmental Impact Assessment
• /
• v.27 no.5
• /
• pp.475-488
• /
• 2018

Surveying urban tributary vegetation is based mainly on field sampling at present. The tributary vegetation survey integrating UAV NIR(Unmanned Aerial Vehicle Near Infrared Radiance) imagery and in-situ point photo has received only limited attentions from the field ecologist. The reason for this could be the largely undemonstrated applicability of UAV NIR imagery by the field ecologist as a monitoring tool for urban tributary vegetation. The principal advantage of UAV NIR imagery as a remote sensor is to provide, in a cost-effective manner, information required for a very narrow swath target such as urban tributary (10m width or so), utilizing very low altitude flight, real-time geo-referencing and stereo imaging. An exhaustive and realistic comparison of the two techniques was conducted, based on operational customer requirement of urban tributary vegetation survey: synoptic information, ground detail and quantitative data collection. UAV NIR imagery made it possible to identify area-wide patterns of the major plant communities subject to many different influences (e.g. artificial land use pattern), which cannot be acquired by traditional field sampling. Although field survey has already gained worldwide recognition by plant ecologists as a typical method of urban tributary vegetation monitoring, this approach did not provide a level of information that is either scientifically reliable or economically feasible in terms of urban tributary vegetation (e.g. remedial field works). It is anticipated that this research output could be used as a valuable reference for area-wide information obtained by UAV NIR imagery in urban tributary vegetation survey.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.34 no.1
• /
• pp.99-107
• /
• 2016

In order to maintain the precise positioning accuracy of the VLBI system, the shape deformation found in antenna structure should be monitored. In fact, reduced the antenna gaining of an electromagnetic wave reception from the Quasar has been particularly expected due to the shape deformation of main reflector in VLBI antenna. Therefore, the importance of shape deformation monitoring for the main reflector has been significantly increased. The main reflector has come out as the high potential for deformation in the VLBI structure. The fact has led us to investigate the monitoring system for the main reflector based on the efficient algorithm in accordance with the close-range photogrammetry, which of expecting to be utilized as the continuous and automated monitoring system for the structure deformation in the near future. Ten fitting lines were estimated with the TLS for feature points of distributed in all directions from the main reflector. The resultant intersection point of estimated fitting lines was calculated by using the nearest point calculation algorithm, based on those non-intersection lines. Following to the intuitive basis for the time series analysis, the results was able to provide the calculation of numerical variation in the intersection point, which is represented in 3-axis,; that we are expecting to open the way for predicting a deformation rate as well as deformation direction

• The Journal of the Korea Contents Association
• /
• v.14 no.1
• /
• pp.223-237
• /
• 2014

The purpose of this study is to understand the perceptions of public officials in improving primary health care service for local communities by applying Q methodology that draw upon schematic model in subjectivity study. A survey was carried out among public officials at Gangneung Community Health Center, South Korea, to classify the 49 selected Q-statements into a normal distribution using a 11 point scale. The collected data was analyzed using QUANL program, and principal component factor analysis using varimax rotation was used to identify public officials' perceptions of improving quality of health care for local communities as a meaningful service provider. Type I can be categorized by a strong concern for the service acceptance, Type II can be categorized by advocating for service usability, Type III can be categorized by the pursuit of service specialization, Type IV can be categorized by roles for service accessibility, and Type V can be categorized by the suggestions for operation and management. The results provide information used to further improve quality of community health care service with the aim to promote the effectiveness of health care delivery and to increase health service utilization.