• Advances in Computational Design
• /
• 제3권1호
• /
• pp.87-112
• /
• 2018

In this study, it is aimed to present engineering software to estimate the structural response of concrete arch dam. Type-1 concrete arch dam constructed in the laboratory is selected as a reference model. Finite element analyses and experimental measurements are conducted to show the accuracy of initial model. Dynamic analyses are carried out by spectrum analysis under empty reservoir case considering soil-structure interaction and fixed foundation condition. The displacements, principal stresses and strains are presented as an analysis results at all nodal points on downstream and upstream faces of dam body. It is seen from the analyses that there is not any specific ratio between prototype and scaled models for each nodal point with different scale values. So, dynamic analyses results cannot be generalized with a single formula. To eliminate this complexity, the regression analysis, which is a statistical method to obtain the real model results according to the prototype model by using fitting curves, is used. The regression analysis results are validated by numerical solutions using ANSYS software and the error percentages are examined. It is seen that 10% error rates are not exceeded.

• 소성∙가공
• /
• 제18권4호
• /
• pp.342-346
• /
• 2009

Forming characteristics for the bundle extrusion of Cu-Ti bimetal wires are investigated, which can identify the process conditions for weak mechanical bonding at the contact surface during the direct extrusion of a Cu-Ti bimetal wire bundle. Bonding mechanism between Cu and Ti is assumed as a cold pressure welding. Then, the plastic deformation at the contact zone causes mechanical bonding and a new bonding criterion for pressure welding is developed as a function of the principal stretch ratio and normal pressure at the contact surface by analyzing micro local extrusion at the contact zone. The averaged deformation behavior of Cu-Ti bimetal wire is adopted as a constitutive behavior at a material point in the finite element analysis of Cu-Ti wire bundle extrusion. Various process conditions for bundle extrusions are examined. The deformation histories at the three points, near the surface, in the middle and near the center, in the cross section of a bundle are traced and the proposed new bonding criterion is applied to predict whether the mechanical bonding at the Cu-Ti contact surface happens. Finally, a process map for the direct extrusion of Cu-Ti bimetal wire bundle is proposed.

• 대한간호학회지
• /
• 제41권1호
• /
• pp.129-140
• /
• 2011

Purpose: This study was done to develop an instrument for measuring intellectual capital and assess its validity and reliability in identifying the components, human capital, structure capital and customer capital of intellectual capital in hospital nursing organizations. Methods: The participants were 950 regular clinical nurses who had worked for over 13 months in 7 medical hospitals including 4 national university hospitals and 3 private university hospitals. The data were collected through a questionnaire survey done from July 2 to August 25, 2009. Data from 906 nurses were used for the final analysis. Data were analyzed using descriptive statistics, Cronbach's alpha coefficients, item analysis, factor analysis (principal component analysis, Varimax rotation) with the SPSS $PC^+$ 17.0 for Windows program. Results: Developing the instrument for measuring intellectual capital in hospital nursing organizations involved a literature review, development of preliminary items, and verification of validity and reliability. The final instrument was in a self-report form on a 5-point Likert scale. There were 29 items on human capital (5 domains), 21 items on customer capital (4 domains), 26 items on structure capital (4 domains). Conclusion: The results of this study may be useful to assess the levels of intellectual capital of hospital nursing organizations.

• 한국유기농업학회지
• /
• 제20권2호
• /
• pp.143-159
• /
• 2012

Agricultural income is calculated with producer price, output and management cost. This study compared organic farming with conventional one for agricultural income, producer price and output by items. And then it proposed the method of item selection and crop system from a diversification point of view. The coefficient of variation to producer prices in organic farming was 4.7%, and conventional one was 30.3% because organic products have been produced in a system of contract farming with consumers' cooperative. This result means the price of organic products is stabler than that of conventional price. And agricultural income of organic farming has been generally known more than that of conventional one. However, agricultural gross income of conventional farming was more than that of organic one by 20.3% in 2010. It was caused by output reduction of a few items(fer example; onion, large green onion, potato and young pumpkin) due to freak weather conditions and constant producer price for several years in organic farming. In order to increase agricultural income, appropriate crop selection and system should be introduced to organic farming. A principal crop is the rice plant and 2 subordinate crops are dry crops at bare field and greenhouse respectively. Thus 5 crop systems that agricultural gross income are relatively increased larger among 15 crop systems estimated are rice+ginger+cucumber, rice+ginger+tomato, rice+large green onion+cucumber, rice+sweet potato+cucumber and rice+onion+ cucumber.

• 패션비즈니스
• /
• 제8권5호
• /
• pp.144-154
• /
• 2004

The purpose of this study is to consider the characteristics of character's body-image throughout the on-line games and with this study we researched the symbolic meaning reflected by the character's body-images throughout the fashion. The characteristics of the body-images presented in modern fashion is expressed in 4 features on Lineage II game. First, it adopts the ways in which modern fashion expresses the erotic image and represents various sexual stimulation, which can not be represented in the real world, in cyberspace. Second, it expresses the beauty and taste in sensitivity by exchanging the items, which are the features of body-image, each other as the neutral body-image and pursuits for the double side feature between males and females by dismantling the point of view to sex. Third, it shows the new value system different from the existing one by using extraordinary items and materials that you've never seen in real fashion as the abnormal body-image expressed in informal and inaccurate principal of deformation. Fourth, it show the body with the items which induces more interest and curiosity than the real world do as the humorous body-image accompanying with childish amusement and pleasure.

• 터널과지하공간
• /
• 제9권1호
• /
• pp.12-19
• /
• 1999

장약량, 측정거리 등과 같은 발파조건들이 지반진동에 미치는 영향을 조사하기 위하여 골프장 조성공사를 위한 지표발파와 고속도로 건설공사를 위한 터널발파에서 지반진동을 측정하였다. 지표발파에서 삼승근 환산거리방법으로 구한 입지상수 K와 n은 각각 74.1, 01.37로 나타났다. 측정거리가 멀어질수록 Khk n의 절대값은 증가하였다. 지표발파에서 주주파수 대역은 5~60 Hz 이었으며, 그 중에 80% 정도는 10~30 Hz의 범위에 분포하였다. 반면에 터널발파의 주주파수 대역은 25~98Hz로서 지표발파보다 크게나타났다.

• 한국도로학회논문집
• /
• 제19권6호
• /
• pp.47-56
• /
• 2017

PURPOSES : The purpose of this study is to investigate the stresses of the middle slab in a double-deck tunnel owing to the slab lift to replace the underlying elastic pads during maintenance work. METHODS : The middle slab was divided into three different sections: typical section, expansion joint section, and emergency passageway section. Finite element analysis models of these three sections of middle slab were developed, and the stress distribution and maximum stresses were obtained using the models when the middle slab was lifted to replace the underlying elastic pads. Various slab lifting methods were examined in this study such as one-, two-, and multiple-point lifts, distributed lifts, and one or both slab side edge lifts. RESULTS : When the slab side edge is lifted, the longitudinal stresses of the slab are almost the same as the principal stresses. This implies that the governing stresses are the longitudinal stresses. The maximum stresses with both-edge lifts are generally smaller than those with one-edge lifts at all three sections of middle slab. CONCLUSIONS : If the middle slab in a double-deck tunnel is lifted for maintenance, the slab should be lifted at multiple points along the longitudinal direction to reduce the tensile stresses.

• 대한원격탐사학회지
• /
• 제27권3호
• /
• pp.359-367
• /
• 2011

A suitable pan-sharpening method has to be chosen with respect to the used spectral characteristic of the multispectral bands and the intended application. The research on pan-sharpening algorithm in improving the accuracy of image classification has been reported. For a classification, preserving the spectral information is important. Other applications such as road detection depend on a sharp and detailed display of the scene. Various criteria applied to scenes with different characteristics should be used to compare the pan-sharpening methods. The pan-sharpening methods in our research comprise rather common techniques like Brovey, IHS(Intensity Hue Saturation) transform, and PCA(Principal Component Analysis), and more complex approaches, including wavelet transformation. The extraction of matching pairs was performed through SIFT descriptor and Canny edge detector. The experiments showed that pan-sharpening techniques for spatial enhancement were effective for extracting point and linear features. As a result of the validation it clearly emphasized that a suitable pan-sharpening method has to be chosen with respect to the used spectral characteristic of the multispectral bands and the intended application. In future it is necessary to design hybrid pan-sharpening for the updating of features and land-use class of a map.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2005년도 추계학술대회 논문집
• /
• pp.393-397
• /
• 2005

A process map has been developed, which can identify the process conditions for weak mechanical bonding at the contact surface during the direct extrusion of a Cu-Ti bimetal wire bundle. Bonding mechanism between Cu and Ti is assumed as a cold pressure welding. Then, the plastic deformation at the contact zone causes mechanical bonding and a new bonding criterion fur pressure welding is developed as a function of the principal stretch ratio and normal pressure at the contact surface by analyzing micro local extrusion at the contact zone. The averaged deformation behavior of Cu-Ti bimetal wire is adopted as a constitutive behavior at a material point in the finite element analysis of Cu-Ti wire bundle extrusion. Various process conditions for bundle extrusions are examined. The deformation histories at the three points, near the surface, in the middle and near the center, in the cross section of a bundle are traced and the proposed new bonding criterion is applied to predict whether the mechanical bonding at the Cu-Ti contact surface happens. Finally, a process map for the direct extrusion of Cu-Ti bimetal wire bundle is proposed.

• 패션비즈니스
• /
• 제5권3호
• /
• pp.73-84
• /
• 2001

The purpose of this study is to apply fundamental data of impression formation research by analysing and observing the various facial image that can be effected from hair style as well as be helpful for choosing suitable hair style for T.P.O in modern society. This study targeted 305 college women in Daegu and Gyung-book area. Hair Style Image Scale(HSIS)was used the scale of seven point modified the S-D(Semantic Differential) method. The analysis of impression formation effect of hair style using SPSS WIN package have completed from the principal component analysis by Varimax perpendicular rotation method and ANOVA was used to recognize the difference in impression formation according to hair style change. In the case of statistical difference was appeared, LSD post-verification was applied for that. The conclusions of this study is as followed ; 1. The factors of impression formation effected by hair style were classified as goodwill factor, refinement factor, elegance factor and individuality factor. 2. In terms of goodwill factor, long hair style showed highest level and short cut hair, bobbed hair in an order. In refinement factor, there was no difference between short cut hair and bobbed hair and both of them was higher than long hair. In elegance factor, long hair was highest and bobbed hair was lowest. In individuality factor, short cut hair and bobbed hair higher than long hair and no difference between short cut hair and bobbed hair.