• Plant Resources
• /
• v.2 no.2
• /
• pp.88-95
• /
• 1999

These experiments were conducted to evaluate the variability of seed germination and seedling growth with different levels of polyethylene glycol(PEG 6,000) solution in onion seed. Average germination percentage of seed primed in PEG solution with 1.00 and 0.75 MPa was higher than control, and that of seed primed in 1.50MPa was lower than unprimed control. Germination percentage(GP) of seed primed for 5 days was highest, and as the primed days become long, the GP was decreased. The GP of airation seed during the primed was higher than that of unairation seed, about 5% , respectively. The GP of washed seed after primed was higher than that of unwashed seed, but that of redried seed after primed was lower than that of the others. The highest GP cultivar was Chunjoogoohyung and the lowest GP cultivar was Seouldego in unredried seed after primed, but Chunjoojoonggo was highest and Jungpoonwhang was the lowest cultivar in redried seed after primed. As the PEG concentration increased, the seedling length(SL) was shortened, and seed primed for 15 days was longer than other treatments. The SL of primed seed was similar to GP. The SL of washed seed after primed was longer than that of others, but that of redried seed after primed was shortest among the others. The SL of Chunjoojoonggo and Nongwoodego was longest and Seouldego was shortest among the cultivars in unredried seed after primed, but that of Chunjoogoohyung and Chunjoojoonggo was longest and Seouldego was the shortest cultivars in redried seed after primed.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.44 no.2
• /
• pp.138-142
• /
• 1999

An experiment was carried out to find out the changes in morphology, sugars, and $\alpha$-amylase activity during the priming of rice seeds (Oryza sativa L. cv. ＇Ilpumbyeo＇). For priming, seeds were soaked in -0.6 MPa PEG solution at 15$^{\circ}C$ for 4 days (properly primed) and at $25^{\circ}C$ for 4 and 10 days (over-primed) and dried at room temperature. The size of coleoptile and differentiated leaves of properly primed seeds were bigger and coleoptile was separated from the other part of embryo compared with non-primed and over-primed seeds. As priming of seeds advanced, compound starch grains in the endosperm disintegrated into tiny starch granules, and small holes were found in the tiny starch granules and a cavities developed between embryo and endosperm. The radicle and plumule of properly primed germinating seeds developed faster than non-primed and overprimed germinating seeds. Sucrose, maltose, and raffinose contents of properly primed seeds decreased, while content of glucose and fructose and $\alpha$-amylase activity increased. However, sugar content and $\alpha$-amylase activity of over-primed seeds were lower compared with non-primed seeds or properly primed seeds.

• Horticultural Science & Technology
• /
• v.31 no.6
• /
• pp.700-705
• /
• 2013

This study was initiated to evaluate hydrophilic polymers (hydrogels) as a new solid matrix medium for seed-priming of Heteropappus arenarius Kitam. Solid matrix priming (SMP)-media were prepared with the combination of Na- and K-based hydrogels and hydrogels with three different dry levels (DC; 70%, 80%, and 90%). Priming was performed in the dark at 15 or $20^{\circ}C$ for 24 hours, and all primed seeds were incubated at $20^{\circ}C$ in the dark for the germination test. Non-primed seeds and seeds primed with distilled water (DW) were also included. To reach the germination rate of 50% ($T_{50}$), it took 4.0 days for non-primed seeds, and 3.6 and 3.9 days for DW-primed seeds at 15 and $20^{\circ}C$, respectively. Na-based hydrogel-primed seeds with 70% DC (Na 70%) showed the fastest germination, which respectively took and 1.9 and 1.8 days at 15 and $20^{\circ}C$ to $T_{50}$. K-based hydrogel-primed seeds with 70% DC showed the fastest germination among K-based hydrogels with various DC levels, but it took 0.6 days more to $T_{50}$ compared to Na 70%. The hydration rate (HR) of DW-primed seeds was 37% lower than that of Na 70%-primed seeds at $15^{\circ}C$ priming temperature, which indicates that Na 70% priming is the best solid matrix priming condition for promoting the germination of H. arenarius seeds.

• Restorative Dentistry and Endodontics
• /
• v.21 no.1
• /
• pp.321-338
• /
• 1996

The purpose of this study was to evaluate the effect of moistening and air-drying of acid conditioned dentin and enamel on the marginal microleakage. In this study, Class V cavity were prepared on both buccal and lingual surface of sixty extracted human premolars with cementum margin. These specimens were randomly devided into three groups and three dentin adhesives(Scotchbond Multi-Purpose, All bond 2, Prisma Universal Bond 3) were applied to each group. The specimens in each group were subdevided into four groups (Wet/primed, Dry/primed, Wet/not primed, Dry/not primed) and the etched dentin and enamel surface were treated these four surface treatments prior to the placement of a bonding agent or adhesive. Wet/primed group was simply blot-dried with a damp facial tissue before primer placement ; Dry/primed group was air dried for 30 seconds before the placement of a primer ; Wet/not primed group and Dry/not primed group were not primed after blot dried and air dried for 30 seconds each group. The bonding agent and composite resin were applied for each group. All specimens were exposed to 500 cycle of thermal stress. Specimens were placed in a silver nitrate solution and then sectioned buccolingually through the center of the restoration. The dye penetrations of the specimens were observed with a stereo microscope. The statistical test were applied to the results using a one way analysis variance (ANOVA) and Duncan's multiple range test. The aspects of silver ion penetration into the resin/dentin interface were examined under scanning electron microscopy. The results were as follows. 1. In all groups, the enamel margin showed significantly lower leakage value than the cementum margin (p<0.05). 2. Regardless of various surface treatment and dentin adhesives, there was no significant difference at the enamel margins (p>0.05). 3. At the dentin margins, the leakage values of Dry/not primed group showed significantly higher than that of the other groups (p<0.05). The leakage values of Wet/primed group showed significantly lower than that of the other groups, but, there was no significant difference between Wet group and Dry group. 4. There was no significantly difference between the dentin adhesives regarding the surface treatments in all groups(p>0.05). 5. On the backscatterd scanning electron microscopy observation, the penetration of the silver ion occured at the bonding resin/dentin interface. In the Wet/primed group, resindentin hybrid zone and resin penetration into the dentin was observed. The resin tags were compactively formed to a thickness of $3\sim4{\mu}m$ at the upper part of dentinal tubules. In the Dry/primed group, the thickness of the hybrid zone and the diameter, depth of the resin tags diminished. In the Non-primed groups, the hybrid zone was not identified and few resin tag was observed. There was the gap formation in the resin/dentin interface.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.44 no.2
• /
• pp.134-137
• /
• 1999

An experiment was carried out to determine the effects of priming and growth regulator treatment of seeds on the emergence and seedling growth of rice, Oryza sativa L. (cv. 'Ilpumbyeo'). Normal seeds were primed in a -0.6 MPa polyethylene glycol solution at 15$^{\circ}C$ for four days with air-bubbling. Then both primed and non-primed seeds were soaked in water, 100 ppm GA$_3$, 2 ppm ABA, and 10 ppm kinetin solutions for 24 hours. The seeds were planted in soil at 3 and 5 cm depths and allowed to germinate in a growth cabinet at 2$0^{\circ}C$. Generally, the emergence rate at the 3 cm seeding depth was higher and emerged faster compared with the 5 cm seeding depth. The emergence rate of primed seeds was higher and emerged faster compared to non-primed seeds. GA$_3$ and kinetin treatments were the most effective to improve the emergence rate of non-primed seeds. Coleoptile length at the 5 cm seeding depth was longer than that at the 3 cm seeding depth. Leaf number, plant height, and root length of primed seedlings were higher compared with non-primed seeds. GA$_3$ promoted the elongation of plant height and mesocotyle length.

• Journal of Adhesion and Interface
• /
• v.12 no.3
• /
• pp.99-104
• /
• 2011

Currently, automotive pre-primed coatings has been developed to overcome environmental regulations and to reduce manufacturing cost in automotive industry. By these reasons, an automotive pre-primed system has been investigated to remove the wash and pre-treatment process using a roll coating application. It is required to develop non-weldable pre-primed system for automotive structural adhesives, because pre-primed sheet coated with organic compounds is hard to be assembled by welding process. Primer 1 (polyester type) and primer 2 (urethane type) were designed to satisfy flexibility and formability for non-weldable pre-primed system. According to the results of physical property test of the primers, adhesion test such as single-lap shear test and T-peel test, primer 1 (polyester type) had better physical properties such as pencil hardness, solvent resistance, flexibility and adhesion with automotive adhesive than that of primer 2 (polyurethane type). In addition, the possibility of the non-weldable pre-primed system was applicable to automotive assembly process in place of welding process.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.44 no.3
• /
• pp.273-276
• /
• 1999

Some metabolites and embryo growth of primed tobacco (Nicotiana tabacum L. cv. ‘KFI09’) seeds were observed during priming. The seeds were primed at 15 and $25^{\circ}C$ for 1, 2, 3, 5, 10 and 15 days in a -0.8 MPa polyethylene glycol 6000 (PEG) solution. The time to 50% seed germination (T$_{50}$) was greatly reduced when the seeds were primed at $25^{\circ}C$ when compared with 15$^{\circ}C$. The $\alpha$-amylase activity and sugars and amino acid contents in the seeds primed at $25^{\circ}C$ greatly increased, while $\alpha$-amylase activity was similar, and sugar and amino acid contents increased slightly in the seeds primed at 15$^{\circ}C$. When the seeds were primed at $25^{\circ}C$, growth of the embryo which was enclosed by endosperm was detected, while the endosperm became thinner as the priming duration was extended.d.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.44 no.3
• /
• pp.263-266
• /
• 1999

Tobacco (Nicotiana tabacum L. ‘KF109’) seeds were primed in polyethylene glycol 6000 (PEG 6000) solutions to determine a) what osmotic potential of the solution would be optimal for priming, i.e., critical potential level for preventing germination, and b) what temperature and duration would be the most effective in priming. The germination was completely prevented below -0.8 MPa of PEG 6000, that indicates a optimum water potential for seed priming. Seeds were primed for 0, 1, 2, 3, 5, 10 and 15 days at 15, 20 and $25^{\circ}C$, respectively, under the-0.8 MPa PEG 6000 solution to find out the most effective temperature and duration for priming. The effectiveness of priming, particularly in germination speed, was observed more distinctly when the primed seeds were germinated at 15$^{\circ}C$ than 2 5$^{\circ}C$. The greatest reduction of the time to 50% germination (T/sob 50/) was when the seeds were primed at $25^{\circ}C$. The reduction rate of the $T_{50}$ was rapid when primed from 1 day to 8 days and then slowed down in the seeds primed for longer than 8 days. The time from 10 to 90% germination ( $T_{10-90}$ increased in the primed seeds for longer than 8 days which showed the reversed effect of synchronous germination. However, $T_{50}$ was reduced continuously in the seeds even primed over 8 days. Thus, the optimum condition for tobacco seeds priming with PEG 6000 solution was -0.8 MPa in osmotic potential of the solution at $25^{\circ}C$ for 8 days.ays.

• Journal of Adhesion and Interface
• /
• v.10 no.4
• /
• pp.155-161
• /
• 2009

The most upcoming technical issue of automotive coating is the compact coating process. Pre-primed coating is the outstanding technology eliminating electro-deposition and primer coating process. The main properties of pre-primed coating for automotive are flexibility, corrosion resistance, and weldability. Therefore, we synthesized the conventional polyester, elastomeric polyester and polyvinylidene fluoride resins and evaluated their properties to use as weldable pre-primed automotive coatings. As the results of flexibility and curing behavior, the elastomeric polyester coating was most appropriate to use for the pre-primed automotive coatings.

• The Journal of the Korean Society for Microbiology
• /
• v.6 no.1
• /
• pp.29-40
• /
• 1971

Various kinds of antibiotics are generally believed to have inhibitory effects on the antibody response. However, as polymyxin B which belongs to the cyclic polypeptide group of antibiotic was found to have some enhancing effects on the antibody response of rabbits to enterobacterial common antigen(CA) under specified conditions, experiments were carried out on this problem with the following results. 1. When mixture of polymyxin B and CA derived from Salmonella typhimurium(STM) was treated 30 minutes at $37^{\circ}C$ and injected three times into rabbits by intravenous route, the antibody response to CA was weaker than rabbits injected CA only. 2. Mixture of polymyxin B and CA showed a marked antibody production when injected into rabbits primed with small amounts of heat-extracted antigen of STM, while the injection of CA alone showed low titers of response. 3. Mixture of polymyxin B and heat-extracted CA-containing antigen of Escherichia coli 014 also showed a increased antibody production than CA alone in rabbits primed with antigen of STM. 4. The effect of polymyxin B appeared in different ways. This antibiotic did not enhance the CA antibody response in rabbits primed with small amounts of E. coli 0111 and 055, but enhance in rabbits primed with Shigella flexneri. 5. No enhancing effect on the antibody response was observed by polymyxin B in rabbits primed with CA. 6. No enhancing effect on the antibody response was also noted in rabbits primed with STM antigen in case polymyxin B and CA were administered simultaneously but in veins of different places. 7. Bacitracin did not enhance the CA antibody response in primed rabbits with STM antigen, but neomycin slightly enhance the response. 8. Lipopolysaccharide showed no priming effect on the CA antibody response, and no enhancement of the CA antibody response in rabbits printed with STM. 9. The priming effect of STM antigen against CA antibody response was very weak as compared with the effect of CA derived from STM antigen.