• Journal of the Korean Society for Heat Treatment
• /
• v.5 no.4
• /
• pp.233-239
• /
• 1992

A study of the precipitation process of Al-Li binary alloy at low ageing temperature has been carried by electrical resistivity measurement. Two types of G.P.zones were formed during ageing at low temperature. G.P. (1) zone and G.P. (2) zone have been formed primarily at ageing temperature below $60^{\circ}C$ and at ageing temperature range of $80^{\circ}C$ to $100^{\circ}C$, respectively. Therefore the precipitation process of Al-Li binary alloy was as follows; G.P.(1) zone ${\rightarrow}$ G.P.(2) zone ${\rightarrow}{\delta}^{\prime}{\rightarrow}{\delta}$ G.P. (1) zone might be affected by excess vacancies, but G.P. (2) zone might be affected by secondary defects. clusters and Li-vacancy pairs. The activation energy for formation of G.P. (2) zone is 0.87eV. It is lower than that of Al-Cu alloy.

• Korean Journal of Computational Design and Engineering
• /
• v.13 no.5
• /
• pp.391-402
• /
• 2008

Today's product development environment is characterized as abrupt changes in consumer needs and short lifecycle of the product, which requires manufacturing companies to be equipped with time-to-market and time-to-volume strategies as prime factors for the successful product launch on market. They especially need to bring a product to the market faster with smart methodologies that enable assembly manufacturers to efficiently simulate and manage part assembly information throughout product development process. The research in this paper provides n e-manufacturing methodology considering geometric constraints in order to decide assembly process sequences. The methodology organizies the part layout (position & orientation) in order to optimize human postures during the assembly processes. As the case studies, assembly parts for two commercial products have been generated as CAD models and analyzed for the desired solutions for part assembly sequences using the proposed methodology.

• Bulletin of the Korean Chemical Society
• /
• v.15 no.10
• /
• pp.896-900
• /
• 1994

The pH-dependent reduction behavior of N-monosubstituted-4,4'-bipyridinium ions ($RBPY^+: R=methyl(C_1)$; benzyl; n-octyl; n-dodecyl) has been investigated by electrochemical and spectroelectrochemical techniques. At acidic condition, $RBPY^+$ is protonated and the protonated species are reduced by two consecutive one-electron processes. The $2e^-$ reduced species undergoes a chemical reaction with $H^+$. The second-order rate constant $(k_H)$ of the homogeneous chemical process is $(3.7{\pm}0.3){\times}10^3M^{-1}s^{-1}$ for the two electron reduction product of $C_1BPY^+$. At high pH, the electrode reduction of $RBPY^+$ is one-step $2e^-$ transfer process with concomitant addition of $H^+$, which is confirmed by cyclic voltammetric study using a microdisk electrode.

• Electronics and Telecommunications Trends
• /
• v.33 no.6
• /
• pp.1-11
• /
• 2018

Several industrial applications such as space exploration, aerospace, automotive, the downhole oil and gas industry, and geothermal power plants require specific electronic systems under extremely high temperatures. For the majority of such applications, silicon-based technologies (bulk silicon, silicon-on-insulator) are limited by their maximum operating temperature. Silicon carbide (SiC) has been recognized as one of the prime candidates for providing the desired semiconductor in extremely high-temperature applications. In addition, it has become particularly interesting owing to a Si-compatible process technology for dedicated devices and integrated circuits. This paper briefly introduces a variety of SiC-based integrated circuits for use under extremely high temperatures and covers the technology trend of SiC CMOS devices and processes including the useful implementation of SiC ICs.

• Journal of Korea Multimedia Society
• /
• v.25 no.5
• /
• pp.670-675
• /
• 2022

This study proposes an improved binarization method to improve image recognition rate. The research goal is to minimize the information loss that occurs during the binarization process, and to transform the object of the original image that cannot be determined through the transformation process into an image that can be judged. The proposed method uses a stepwise segmentation method of an image and divides blocks using prime numbers. Also, within one block, a trapezoidal type of fuzzy is applied. The fuzzy trapezoid is binarized by dividing the brightness histogram area into three parts according to the degree of membership. As a result of the experiment, information loss was minimized in general images. In addition, it was found that the converted binarized image expressed the object better than the original image in the special image in which the brightness region was tilted to one side.

• The KIPS Transactions:PartD
• /
• v.11D no.4
• /
• pp.917-928
• /
• 2004

Common Criteria as ISO/IEC 15408 is used to assure and evaluate IT system security. As the Prime class of security assurance requirement, CM Configuration Management needs the more principled quality activities and practices for developer must be supported. So in this paper, we propose the well-defined CM method as guideline for TOE developer based on Process model including common criteria and develop the CMPET a quantitative process evaluating tool for CM using checklist. It can support useful process analyzing data to developer, evaluator and user.

• Journal of Mechanical Science and Technology
• /
• v.15 no.12
• /
• pp.1882-1891
• /
• 2001

The present paper investigated the effect of ultrasonic vibrations on the melting process of a phase-change material (PCM). Furthermore, the present study considered constant heat flux boundary conditions unlike many of the previous researches adopted constant wall temperature conditions. Therefore, in the present study, modified dimensionless parameters such as Ste* and Ra* were used. Also, general relationships between melting with ultrasonic vibrations and melting without ultrasonic vibrations were established during the melting of PCM. Experimental observations show that the effect of ultrasonic vibrations on heat transfer is very important throughout the melting process. The results of the present study reveal that ultrasonic vibrations accompany the effects like agitation, acoustic streaming, cavitation, and oscillating fluid motion. Such effects are a prime mechanism in the overall melting process when ultrasonic vibrations are applied. They enhance the melting process as much as 2.5 tildes, compared with the result of natural melting. Also, energy can be saved by applying ultrasonic vibrations to the natural melting. In addition, various time-wise dimensionless numbers provide conclusive evidence of the important role of ultrasonic vibrations on the melting phenomena.

• Journal of Arbitration Studies
• /
• v.30 no.4
• /
• pp.51-70
• /
• 2020

The Mediation-Arbitration hybrid is becoming more popular since it makes an amicable relationship and thorough statement possible. The Mediation-Arbitration hybrid has been used to take advantage of both dispute resolution methods. In a Med-Arb process, negotiating a resolution to disputes is attempted with a mediator's help. If the mediation ends in an impasse or issues remain unresolved, parties can move on to arbitration. Med-Arb can also be cost-effective when disputants hire one person to serve as mediator and arbitrator (Med-Arb-Pure). However, it can disturb the fairness and neutrality of arbitrators, and awards can be annulled. Indeed, "Award by Consent" is different from the "Med-Arb-Pure" process. Arbitrators easily confuse them. Only the parties settle on the arbitral proceedings' course, and the arbitrator can help them (award by consent). The role and skill of a mediator are different from an arbitrator's. Disputants have the right to use a mediator who specializes in mediation. Moreover, mediation communication confidentiality is the essential value of mediation, and this should be protected. Therefore, in the process of "Med-Arb," separation between mediating and arbitrating is a better choice to specialize in each expertise. In this process, "Med-Arb" can be an affordable, expeditious, proper, and effective method of resolving international commercial disputes and continuing ADR prime time.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.36 no.3
• /
• pp.15-34
• /
• 2004

Diverse benefits such as reduction of fresh water consumption and effluent discharge, efficient use of raw materials and energy savings can be obtained by papermaking system closure. Closure of papermaking processes, however, causes many problems including reduction of the efficiency of additives, decrease of retention and dewatering, felt plugging, poor Paper quality, generation of slime and odor, poor vacuum efficiency, etc, and it has been recognized that accumulation of Inorganic and organic substances in the process white water is the prime cause of these problems. Therefore, technological developments for preventing accumulation of these detrimental substances are urgently required for Implementing papermaking system closure. Understanding of the accumulation phenomena of the inorganic and organic substances in the papermaking process white water is prerequisite for papermaking system closure. In this study a process simulation method was used to analyze the accumulation phenomena of anionic starch In the process white water as the closure level of a fine paper making process is increased. A pilot paper machine was used as a model process. Starch adsorption and desorption models were developed based on the concept of starch adsorption ratio, which was not considered in previous studies. Steady state simulation studies were carried out based on this model using a commercial simulator. In steady state simulation, the variation of dissolved starch concentration in each process unit was monitored as a function of white water usage for wire shower. The result of the steady state simulation showed that dissolved starch concentration and its increase ratio in Process units increased as white water usage ratio for wire shower increased.

• Korean Journal of Computational Design and Engineering
• /
• v.1 no.1
• /
• pp.33-44
• /
• 1996

This study deals with the development of wire path searching module as a part of automobile wire harness design system. Wire path searching module manages the free space, finds transition locations, and creates bundle paths to dramatically reduce a tedious iterative routing process which results in easy optimization of the bundle paths. A prime policy in the system configuration is to compromise between man's and computer's ability, and make it possible a designer's leading role in designing process. Human input is indispensable to cope with the special cases which were not considered in the initial design stage of the system. In this study, we improve the previous shortest-path-finding algorithm, (VGraph and RCA method) into a new method called Extended RCA. Bundles, connectors and transitions are handled as objects so one can manage and modify physical properties of the objects easily. Therefore a verification is allowed at any desired stage of design. The reuse of previous result is facilitated by using Dependency Structure, which represents the mutual relations among connectors, transitions, and bundles. Dependency Structure makes it possible the elimination of redundant calculating process, and consequently shorter routing time.