• ETRI Journal
• /
• v.32 no.5
• /
• pp.831-834
• /
• 2010

This paper proposes a new joint channel coding algorithm based on principal component analysis. A conventional joint channel coder using passive downmixing undergoes a reduction of both the primary-to-ambient energy ratio (PAR) of the downmix signal and the panning gain ratio of the primary source. The proposed system preserves the PAR of the downmix signal by using active downmixing which reflects spatial characteristic. The proposed system also improves the accuracy of the panning gain ratio estimation. Computer simulations and subjective listening tests verify the performance of the proposed system.

• Journal of Broadcast Engineering
• /
• v.19 no.1
• /
• pp.64-74
• /
• 2014

The primary and ambient signal decomposition of a stereo sound is a key step to the stereo upmix. The principal component analysis (PCA) is one of the most widely used methods of primary-ambient signal decomposition. However, previous PCA-based decomposition algorithms assume that stereo sound sources are only amplitude-panned without any consideration of phase difference. So it occurs some performance degradation in case of live recorded stereo sound. In this paper, we propose a new PCA-based stereo decomposition algorithm that can consider the phase difference between the channel signals. The proposed algorithm overcomes limitation of conventional signal model using PCA with phase alignment. The phase alignment is realized by using inter-channel phase difference (IPD) which is widely used in parametric stereo coding. Moreover, Enhanced Modified PCA(EMPCA) is combined to solve the problem of conventional PCA caused by Primary to Ambient energy Ratio(PAR) and panning angle dependency. The simulation results are presented to show the improvements of the proposed algorithm.

• Journal of Korea Foresty Energy
• /
• v.19 no.1
• /
• pp.1-6
• /
• 2000

This study was carried out to investigate the growth responses of Pinus densiflora seedlings to enhanced UV-B environment for 16 weeks in the field condition. The seedlings were treated with one of three levels of UV-B dosages - ambient UV-B, ambient + 3.2, and ambient + 5.2 KJ m$^{-2}$day$^{-1}$ and the irradiation was performed at the stage before the germination, the fully expanded cotyledon, and the primary needles grown more than 0.8cm in length of the seedlings, respectively. Enhanced UV-B irradiation reduced the height and the root collar diameter growth, and dry mass production of the seedling, and T/R ratio was increased by the UV-B treatment. Difference in seedling growth was observed by difference in time of the UV-B treatment. Among the seedlings which were treated with ambient - 3.2 KJ m$^{-2}$day$^{-1}$, height and root collar diameter growth was relatively high in the seedling received the UV-B treatment at the stage before the germination. The lowest dry mass production was observed in the seedlings received the UV-B at stage of cotyledon both in two levels of enhanced UV-B treatment. Chlorophyll concentration was reduced by enhanced UV-B irradiation, and chlorophyll a/b ratio was increased by the UV-B treatment.

• Steel and Composite Structures
• /
• v.38 no.2
• /
• pp.177-187
• /
• 2021

The effect of nanoparticle volume fraction on the elastic properties of a polymer-based nanocomposite was experimentally investigated and the obtained results were compared with various existing theoretical models. The nanocomposite was consisted of high density polyethylene (HDPE) as polymeric matrix and 0, 0.5, 1 and 1.5 wt.% multi walled carbon nanotubes (MWCNTs) prepared using twin screw extruder and injection molding technique. Nanocomposite samples were molded in injection apparatus according to ASTM-D638 standard. Therefore, in addition to morphological investigations of the samples, tensile tests at ambient temperature were performed on each sample and stress-strain plots, elastic moduli, Poisson's ratios, and strain energies of volume units were extracted from primary strain test results. Tensile test results demonstrated that 1 wt.% nanoparticles presented the best reinforcement behavior in HDPE-MWCNT nanocomposites. Due to the agglomeration of nanoparticles at above 1 wt.%, Young's modulus, yielding stress, fracture stress, and fracture energy were decreased and Poisson's ratio and failure strain were increased.