• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.10a
• /
• pp.465-468
• /
• 2014

The image processing device sold by the market, which increases the comfort of the driver Around-View of the camera. This system while driving or when parked, came about to prevent accidents caused by driver error or disable the visibility of the system. However, it did not spread widely to the driver due to the problem of the high installation cost and complex installation process from the system for easy operation. Due to problems such as first, expensive equipment and second, the development environment is difficult and third, inconvenient installation process, it is not out because of the prohibitively high cost burden and difficult development environment, programmers and operators. I think if this is solved even one problem of this system would be able to access the user are a little more affordable. In this paper The AVM(Around-View Monitoring) system is proposed, the two problems that minimize expensive equipment, the installation process is inconvenient problem of the three aforementioned systems. Solved the problem caused by a lot of the cost by using low-cost USB device, and a rear camera. Was developed to facilitate the installation is possible by considering the inconvenient installation. Reducing the price paid by consumers because of the system.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.29 no.1
• /
• pp.9-14
• /
• 2015

Due to the declining LED price and environment-friendly energy policies, CO2 emission reduction and energy-saving, the LED lighting industry is accelerating rapidly. In particular, the needs for LED lamp, replacing the existing fluorescent lamp without exchange luminaire or driver circuits, are also rapidly increasing. Therefore, replacement for T8 fluorescent lamp, LED T8 lamp was developed and standardized. However, except LED T8 lamps, other lamps' regulations or standards were not enacted. Also, the stability of fluorescent lamp substitutable LED lamp is low due to the difference in electrical characteristics and mismatch between the existing fluorescent lamp ballast and LED lamp. Therefore, many are struggling while developing fluorescent lamp substitutable LED lamp. In this paper describes the properties of existing fluorescent lamp ballasts and the considerations while developing fluorescent lamp substitutable LED lamp : demonstrating its validity by experiments the developed fluorescent lamp substitutable LED lamp prototype.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.65 no.4
• /
• pp.285-291
• /
• 2016

A light-emitting diode (LED) has been increasingly applied to various industrial fields and general lightings because of its high efficiency, low power consumption, environment-friendly characteristic and long lifetime. To drive the LED lighting, a power converter with the constant output current is needed. Among many power converters, the flyback converter is chosen by many converter designers due to high power density, structural simplicity, and miniaturization. In this converter, an electrolytic capacitor is generally chosen for the stabilization of the DC voltage because of having the large capacitance and the low price. However, the disadvantages are the short expected life time and 120Hz ripple currents on the converter output node. In this paper, a single-stage dimmable PFC DCM flyback converter without the electrolytic capacitor is proposed to prolong the lifetime of the LED driver. For the long lifetime of the converter, the polyester film capacitor with the small capacitance is substituted for the electrolytic capacitor on the output node and an LC resonant filter is added to damp 120Hz ripple current. The proposed converter is verified through the simulation and the experimental works.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.25 no.3
• /
• pp.230-236
• /
• 2016

This research attempted simplifications to the LED street light for price competitiveness. The street light was simplified by replacing the SMPS with an IC driver on the PCB using an AC-type LED. The optical element that shape of a line-shaped lens covered LED crowded. Thus, this study aims to improve LED efficiency by using the minimum optical system. In order to satisfy the M3 regulation of street lighting at grade, the lens was divided into two parts depending on the forward direction of the light. Further, the changes in the number of LEDs located on part 1 and part 2 of the lens were analyzed. Through simulation, we determined the proper light distribution that meets M3 regulation of street lighting.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.2
• /
• pp.462-468
• /
• 2010

In this paper, the new efficient drive control technology based on the conventional full-color electric display board image processing method is proposed. This technology can be applied to high-fidelity large size panel TV and LCD Display, and makes high-fidelity-display-drive control possible in those. The proposed drive control technology can strengthen the image processing function of the conventional technology. Also, the automatic or manual adjustment of contrast, bright, tint, color, gamma revision, etc. can help to achieve high-fidelity vision. This technology can be adopted with lower price.

• Journal of Korea Trade
• /
• v.24 no.5
• /
• pp.35-54
• /
• 2020

Purpose - It seems common sense that corporate social responsibility (CSR) is a key driver of business sustainability. Nevertheless, there has been little research on the performance of socially responsible activities, including economic and environmentally responsibility activities, in internationally diversified firms. Design/methodology - The purpose of this study was to evaluate the effects of CSR activities on management performance. For this evaluation, an empirical analysis was conducted with total of 2,520 cases, selected from companies listed on the Korea Composite Stock Price Index market for six years from 2013 to 2018. As proxies for management performance, financial data such as a total asset net profit ratio and a total asset operating ratio were used. A multivariate regression analysis was conducted to test hypotheses. Findings - The results of this analysis indicated that firms in the CSR outstanding group were ranked significantly higher than other groups in management performance. In addition, CSR activities of internationally diversified firms positively influenced the total asset net profit ratio and total asset operating ratio. Originality/value - The results suggest that the CSR activities of these firms can play a significant role in enhancing management performance in the economic status of Korea, where the degree of export dependency is high.

• The Journal of Asian Finance, Economics and Business
• /
• v.8 no.3
• /
• pp.251-265
• /
• 2021

It seems a common sense that corporate social responsibility (CSR) is a key driver to attain business sustainability. Nevertheless, there has been little research on the performance of socially responsible activities, including economic and environmental responsibility activities in internationally diversified firms. The purpose of this study was to evaluate the effects of CSR activities on management performance. For this evaluation, an empirical analysis was conducted with a total of 2,520 cases, selected from companies listed on the Korea Composite Stock Price Index market for six years from 2013 to 2018. As proxies for management performance, financial date such as a total asset net profit ratio and a total asset-operating ratio were used. A multivariate regression analysis was conducted to test hypotheses. The results of this analysis indicated that firms in the CSR outstanding group are significantly higher than other groups in management performances. In addition, CSR activities of internationally diversified firms positively influence their total asset net profit ratio and total asset-operating ratio. The results suggested that CSR activities of these firms can play a significant role in enhancing management performances amid the economic status of Korea, where a degree of export dependency is high.

• Journal of Korean Home Economics Education Association
• /
• v.25 no.3
• /
• pp.93-104
• /
• 2013

The aim of this study was to investigate the associations among the food choice motives, attitude to the traditional fermented food, and traditional fermented food consumption behavior in adolescents. Using a web-based self-completion questionnaire, food choice motives, attitude to the traditional fermented food, and frequency of traditional fermented food consumption were examined in 319 high school students in Seoul. As follows are the results of this study; first, food choice motives were emerged by seven factors, and labeled as good food, healing, convenience, weight control, familiarity, price, and health. Attitude to the traditional fermented food and consumption behavior of traditional fermented food were emerged as independent factor, respectively. Second, food choice motives had the significant effect on the attitude to the traditional fermented food(p<.05). Among them, price had the strongest effect(${\beta}$=.235), followed by healing(${\beta}$=.190), health(${\beta}$=.175), and convenience(${\beta}$=.126). Third, the consumption behavior of traditional fermented food was strongly influenced by the attitude to the traditional fermented food(${\beta}$=.549). Finally, weight control was the only direct driver for traditional fermented food consumption. Price, healing, health, and convenience acted as indirect drivers for traditional fermented food through the positive attitude to the traditional fermented food. In conclusion, since the formation of the positive attitude to the traditional fermented food is important for the increase of traditional fermented food consumption, the analysis of underlying food choice motives and attitude to the traditional fermented would be essential.

• Journal of the Korean association of regional geographers
• /
• v.23 no.2
• /
• pp.403-419
• /
• 2017

This study analyzed the forces to drive the change of urban green spaces in Daegu from 1989 to 2009. First, the loss and fragmentation of green spaces in the past 20 years were spatially identified by performing the hot spots analysis for the cell-based spatial metrics quantifying the size and diversity of green spaces. Next, seven drivers such as slope, distance to roads, land price, population density, ratios of residential, commercial, and industrial areas were selected based on the previous studies and the direction of the association between the loss and fragmentation of green spaces and seven drivers was analyzed with the stepwise logistic regression. Finally, the relative importance of the seven drivers and their interactions in the past 20 years were analyzed with the geographical detector. The results show that the loss of green spaces was concentrated on a part of the Anshim housing development district from 1989 to 2009 and green spaces were highly fragmented around the housing development districts such as Seongseo, Anshim, Dalseong-gun and Chilgok. The forces to drive the loss and fragmentation of green spaces in these areas were different at the administrative levels, but the drivers such as slope and ratios of residential and industrial areas were commonly significant. These drivers were positively correlated with largest patch index(LPI) quantifying the loss of green spaces while they were negatively correlated with Shannon's diversity index(SHDI) measuring the fragmentation of green spaces. In other words, the loss and fragmentation of urban green spaces in Daegu appeared around such regions with lower slope and lower ratios of residential and industrial areas. The relative importance of drivers for LPI was listed as ratio of industrial area, land price, and ratio of commercial area in descending order whereas that of drivers for SHDI was listed as ratio of industrial area, land price, and distance to roads in descending order. Also, the interaction between slope and ratio of residential area had a great impact on LPI and SHDI. The ratio of industrial area was a single driver to most significantly explain the loss and fragmentation of urban green spaces in Daegu in the past 20 years. The interaction between slope and ratio of residential area was greater than the independent influence of a single driver. This study will provide the base data to build a sustainable urban green policy for the city of Daegu in the near future.

• Journal of the Korea Society of Computer and Information
• /
• v.12 no.4
• /
• pp.249-256
• /
• 2007

AIn this paper, a new desist of LDI controller IC for general purpose is proposed for driving the LDI(LCD Driver Interface) controller in $4{\sim}9$ inches sized portable small-medium TFT-LCD(Thin Film Transistor addressed -Liquid Crystal Display) panel module. The designed LDI controller was verified on the FPGA(Reld Programmable Gate Array) test board, and was made the interactive operation with the commercial TFT-LCD panel successfully. The purpose of design is that it is standardized the LDI controller's operation by one LDI controller for driving all TFT-LCD panel without classifying the panel vendor, and size. The main advantage for new general-purpose LDI controller is the usage for the desist of all panel's SoG(System on a Glass) module because of the design for the standard operation. And in the previous method, it used each LDI controller for every LCD vendor, and panel size, but because a new one can drive all portable small-medium sized panel, it results in reduction of LDI controller supply price, and manufacturing cost of AV(Audio Video) board and panel. In the near future, the development of SoG IC(Integrated Circuit) for manufacturing more excellent functional TFT-LCD panel module is necessary. As a result of this research, the TFT-LCD panel can make more small size, and light weight, and it results in an upturn of domestic company's share in the world market. With the suggested theory in this paper, it expects to be made use of a basic data for developing and manufacturing for the SoG chip of TFT-LCD panel module.