• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1998.06a
• /
• pp.263-266
• /
• 1998

In this study, the effect of the crystallinity of polyimide (Pl) and the birefringence of the nematic liquid crystal (NLC) for pretilt angle generation on rubbed PI surface containing thiophenylene moieties has been demonstrated. The induced optical retardation produced in rubbed Pl surfaces decreases on increasing the imidization temperature. We suggest that the pretilt angle of 4-cyano-4'-n-pentybiphenyl (5CB) depends on the crystallinity of the rubbed Pl. The order of pretilt angle in NLCs is 5CB>PCH5$\geq$CCH5 at rubbing strength(RS)=150mm (medium rubbing) on rubbed PI surfaces. We suggest that on rubbed Pl surfaces the pretilt angle increases with increasing number of phenylrings in the NLC core.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.13 no.10
• /
• pp.871-875
• /
• 2000

Effects of liquid crystal (LC) alignment using a in-situ photoalignment method by polarized UV exposure on a polyimide (PI) surface with medium side chain were studied. The generated pretilt angle in nematic(N) LC using a in-situ photoalignment method was smaller than that of a conventional photoalignment method for short UV exposure time. Also, the pretilt angle of NLC using a in-situ photoalignment method increases with increasing UV exposure time on the PI surfaces. Finally, the pretilt angle of NLC can be improved by annealing treatment.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.11a
• /
• pp.324-327
• /
• 2001

Liquid crystal alignments on a rubbed polyimide layer were investigated by using optical transmission method. Using this technique, we also studied the pretilt angle of the polymer molecules near the surface of a side-chain polymer layer as a function of the rubbing strength. In particular, we obtained the optical characteristics of liquid crystal orientations and pretilt angles for LC cell photo-aligned by UV as well after rubbing alignment. High pretilt angle of 3.84 degree was obtained on the weekly rubbed polymide layer during UV irradation time of 60min.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.11a
• /
• pp.507-510
• /
• 2000

Alignment effects for nematic liquid crystal (NLC) using an in-situ photo-alignment method with obliquely polarized UV exposure on a polyirnide (PI) surface for homeotropic alignment were studied. The high pretilt angle in NLC can be measured by obliquely W exposure of $30^{\circ}$ on the PI surface for 10~20 min. The pretilt angle of NLC generated using the in-situ photo-alignment was higher than that of a conventional photo-alignment method.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1997.11a
• /
• pp.112-115
• /
• 1997

In this paper, we investigated the liquid crystal(LC) alignment and generation of pretilt angle by using photo-alignment techniques on two kinds of polyimide(Pl) surface. It was found that the uniform alignment for nematic(N) LC is obtained in a cell with slanted UV light irradiation on PI surface without side-chain. We successfully observed that the pretilt angle of NLC is generated about 3.3 degrees in a cell with an incidence angle of 70 degrees on PI surface without side chain. It is considered that the pretilt angle generation in NLC is attributed to interaction between the LC molecular and the polymer.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1997.11a
• /
• pp.198-201
• /
• 1997

We investigated the generation of pretilt angle for nematic liquid crystal (NLC) in a cell with slanted non-polarized ultraviolet (UV) light irradiation on mixtured polyimide (PI) surfaces. It was found that the monodomain alignment of NLC is obtained in a cell with an angle of incidence of 75∼85 degrees on PI surface. We consider that the monodomain alignment of NLC is attributed to anisotropic dispersion force effect due to photo-depolymerization of polymer on Pl surfaces. We successfully observed that the pretilt angle of NLC is generated above 5 degree with an angle of incidence of 75∼85 degree. It is considered that the pretilt angle generation in NLC is attributed to interaction between the LC molecules and the Polymer surfaces.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.04a
• /
• pp.18-22
• /
• 2004

We have investigated the generation of pretilt angle for a nematic liquid crystal (NLC) alignment with rubbing alignment method on polyimide surfaces using thin plastic substrates. It was found that monodomain alignment of NLC is obtained with rubbing alignment method on polyimide surfaces using thin plastic substrates. The NLC pretilt angles generated are about $3^{\circ}$ by the rubbing alignment method on thin plastic substrates, However, the pretilt angle are at about $1.7^{\circ}$ lower on the glass substrate than on thin plastic substrate. Also, EO characteristics of the TN-LCD with a rubbed PI surface based on polymer are almost the same as that of the TN-LCD with a rubbed PI surface based on glass. However, the transmittances of the TN-LCD with a rubbed PI surface based on polymer is less than that with a rubbed PI surface based on glass.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.11a
• /
• pp.137-140
• /
• 2000

Synthesis of a new copoly (M4Ch-ChMA), copoly ((4-methacryloyloxy) chalcone-cholestery methacrylate), with chalconyl and cholesteryl moiety characteristics for photoalignment materials was investigated. Good thermal stabilities of the synthesized copolymers are confirmed by thermogravimetric analysis (TGA) measurement. The pretilt angles of the nematic liquid crystal (NLC) are reduced as UV exposure time is increased on the copolymer surfaces. A pretilt angle of 81$^{\circ}$ in NLC was observed with UV exposure of 3 min on the copolymer-3 surface. The NLCs pretilt angle is attributable to increased chalcone with increasing the UV exposure time.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.14 no.11
• /
• pp.917-921
• /
• 2001

Aligning capabilities for nematic liquid crystal (NLC) using a in-situ photodimerization method on various Photo-crosslinkable Polyimide (Pl) based polymer and blending photopolymer surfaces were investigated. High pretilt angle of the NLC can be measured by obliquely polarized UV exposure on a photo-crosslinkable polyimide based polymer surface containing biphenyl (BP), decyl (de), and cholesteryl (chol) group, respectively. However, the low pretilt angle of the NLC was measured by obliquely polarized UV exposure on the blending photopolymer (Pl and cinnamate materials) surfaces. Consequently, the pretilt angle of the NLC generated on the photo-crosslinkable polyimide based polymer surfaces using the in-situ photodimerization method was higher than that of the blending photopolymers.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.11a
• /
• pp.80-83
• /
• 2003

We have investigated the generation of pretilt angle for a nematic liquid crystal (NLC) alignment with in-situ photoalignment method on polyimide (PI) surfaces using thin plastic substrates. The LC aligning capabilities and pretilt angle of the thin plastic substrates by in-situ photoalignment method were better than that of the glass substrate by general photoalignment. Also, the LC pretilt angle increased with increasing healing temperature and exposure time.