• Journal of the Korean Wood Science and Technology
• /
• 제23권2호
• /
• pp.55-69
• /
• 1995

The primary objective of this research was to investigate optimum manufacturing condition of thin composite panels composed of sawdust, polyethylene film and polypropylene net. At the study the experiment was designed to make thin board in which sawdust offers effectiveness as core composing material, polyethylene as adhesive with added urea resin, and polypropylene as stiffness and flexibility in the composition panel. 100 types of thin composite panels were manufactured according to press-lam and mat-forming process of various hot pressing conditions(pressure, temperature and time). They were tested and compared with control boards on bending properties(MOR, MOE, SPL, WML), internal bond strength, thickness swelling, linear expansion and water absorption. At the same time the visual inspections of each types of panels were accomplished. The physical and mechanical properties of composite types passed by visual inspection were analyzed by Tukey's studentized range test. From the statistical analysis, the optimum manufacturing condition of thin composite panels were selected. Compared with two manufacturing processes, mat-forming process performed better than press-lam process in all tested properties. The optimum manufacturing conditions resulted from the experiment and statistical analysis were able to determine as following: the press temperature was shown the most good result at 130$^{\circ}C$ in mat forming process and 140$^{\circ}C$ press lam process, the press time 4 min in both processes, but the press pressure was 25-10kg/$cm^2$ in mat forming and 15k/$cm^2$ press lam process.

• Journal of the Korean Wood Science and Technology
• /
• 제23권4호
• /
• pp.74-84
• /
• 1995

Eight types of thin composite panels were manufactured by press-lam and mat-forming process applied to optimum manufacturing condition, studied in former first research by author (1995). They were tested and compared with control boards on dimensional stability, internal bond strength, tensile strength, Screw withdrawal strength, and bending properties. These thin composite panels manufactured by mat-forming process were generally superior to those by press-lam in dimensional stability and mechanical properties. In the dimensional stability and mechanical properties of thin composite panels manufactured by mat-forming process, the thin composite panels (A and E type) composed of particle or sawdust core and veneer face with polyethylene film, were as good as those of common plywood (control board). Internal bond strength showed highest value in the thin composite panel(D type) which composed of particle core and polypropylene screen face with polyethylene film. The thin composite panels(G and H type) composed of sawdust or particle core and polypropylene screen face with polyethylene film by press-lam and mat-forming process, showed most highest value in dimensional stability and water absorption.

• Journal of the Korean Wood Science and Technology
• /
• 제16권1호
• /
• pp.21-44
• /
• 1988

팔만칩 및 톱밥을 보오드에 활용(活用)하기 위한 방안(方案)의 하나로, 이들의 취약한 처리(物理) 및 기계적(機械的) 성질(性質)을 개선(改善)시키기 위하여 비목질재료(非木質材料)인 폴리프로필렌망(網)을 결체(結締)하여 보오드를 제조(製造)하였다. 보오드의 제조조건(製造條件)은 비중(比重)을 0.40, 0.55, 0.70 및 0.85의 4수준으로 하고 수지첨가율(樹脂添加率)을 8%, 10%, 12% 및 14%의 4수준으로 하였으며, 망수(網數)는 1장에서 4장으로 하여 보오드를 각각 제조(製造)하였다. 이들 보오드의 물리(物理) 및 기계적(機械的) 성질(性質)은 두께팽창율(膨脹率), 휨파괴계수(破壞係數), 휨탄성계수(彈性係數), 인장강도(引張强度), 박리저항(剝離抵抗) 및 나사못보지력(保持力) 등을 측정조사(測定調査)하고 고찰(考察)하였는데 본연구(本硏究)에서 얻은 중요한 결론(結論)은 다음과 같다. 1) 지수첨가율(指數添加率)이 증가함에 따라 두께팽창율(膨脹率)은 감소(減少)하였고, press-lam 보오드는 일반성형(一般成形)보오드 보다 낮은 값을 보여 주었다. 2) 보오드의 휨파괴계수(破壞係數) 및 탄성계수(彈性系數)는 비중(比重)이 증가하였으며 press-lam 보오 드는 일반적형(一般的形)보오드보다 높은 값을 나타내었다. 망수(網數)가 증가함에 따라 휨파괴계수(破壞係數)는 증가하였고, 수지첨가율(樹脂添加率)이 증가함에 따라서도 같은 양상이 나타났으나 휨탄성계수(彈性係數)의 경우 망수(網數)에 따른 효과(效果)는 나타나지 아니하였다. 3) 비중(比重)이 증가함에 따라 보오드의 인장강도(引張强度)는 증가하였으며, 망구성(網構成)보오드는 대조보오드보다 높은 값을 나타내었다. 또 망수(網數)가 증가함에 따라서도 인장강도(引張强度)는 증가하였으며, press-lam 보오드는 일반적형(一般的形)보오드보다 높은 인장강도치(引張强度値)를 보여 주었다. 4) 보오드의 박리저항(剝離抵抗)은 비중(比重)이 증가함에 따라 증가하였으며 망(網)을 결체(結締)한 보오드는 대조보오드 보다 모두 낮은 값을 보여 주었다. 기수매구성(奇數枚構成)보오드는 우수매구성(偶數枚構成)보오드보다 낮은 박리저항치(剝離抵抗値)를 보였다. 5) 수지첨가율(樹脂添加率) 및 비중(比重)이 증가함에 따라 나사못 보지력(保持力)은 증가하였으나, 망구성(網構成)보오드와 대조보오드사이에서의 차이는 크지 아니하였다. presslam 보오드에서 팔만칩보오드의 경우 고비중(高比重)보오드가, 톱밥보오드의 경우 저비중(低比重)보오드가 각각 대조보오드보다 높은 값을 보여 주었다.

• Journal of the Korean Wood Science and Technology
• /
• 제13권3호
• /
• pp.3-26
• /
• 1985

The object of this study was to investigate the effects on physical and mechanical properties of wood particle and sawdust board combined with wire net. Conventional forming, press-lam, and veneer comply boards combining one to four wire net sheets were made from wood particle and sawdust with different spacings (8, 10, 12, and 18 Mok) and different wire diameters (0.35, 0.50, and 0.80mm) composing wire net. They were compared and analyzed statistically with specific gravity, thickness swelling, length swelling, bending properties (modulus of rupture, modulus of elasticity, work to proportional limit, and total work), internal bonding strength, and screw holding strength between wood particle and sawdust boards. The results obtained at this study as cording to the discussions might be concluded as follows; 1. In specific gravity, both particle and sawdust boards by press-lam method were higher than by conventional forming and veneer comply method, and the boards containing more wire net sheets also showed higher value. But the wire net spacings(Mok) had no influence on specific gravity. In general, particle board showed higher specific gravity than sawdust board. Veneer comply board showed lowest specific gravity values. 2. Both particle and sawdust boards by press-lam method was slightly lower than by conventional forming and veneer comply method in thickness swelling. The sawdust board containing 8, 12. and 18 Mok wire net showed lower thickness swelling than the corresponding particle board, but both sawdust and particle boards containing the T8 and 10 Mok wire net showed higher and similar thickness swelling. 3. Both particle and sawdust boards containing wire net showed no difference in MOR and MOE of bending. Comply board was the highest and particle board showed slightly higher than sawdust board in MOR and MOE values. 4. In work to proportional limit and total work in bending, both particle and sawdust boards containing thicker wire diameter and more wire net sheets showed higher value. From these facts, it is conceivable that boards with thicker wire diameter and more wire net sheets show increasing resistance against external force. But there was no significant difference between particle and sawdust borads. 5. In resistance against delamination (internal bonding strength), both sawdust and particle boards containing wire net showed lower value than control, and also showed decreasing tendency with more number of wire net sheet composed. Particle board showed higher resistance against delamination than sawdust board. 6. In screw holding strength, sawdust board containing thicker wire diameter and more wire net sheets showed higher value, but particle board by press-lam method was higher than by conventional forming and veneer comply method. Screw holding strength of particle board was higher than that of sawdust board.

• Steel and Composite Structures
• /
• 제25권2호
• /
• pp.177-186
• /
• 2017

In this work, the model of magneto-thermoelasticity based on memory-dependent derivative (MDD) is applied to a one-dimensional thermal shock problem for a functionally graded half-space whose surface is assumed to be traction free and subjected to an arbitrary thermal loading. The $Lam{\acute{e}}^{\prime}s$ modulii are taken as functions of the vertical distance from the surface of thermoelastic perfect conducting medium in the presence of a uniform magnetic field. Laplace transform and the perturbation techniques are used to derive the solution in the Laplace transform domain. A numerical method is employed for the inversion of the Laplace transforms. The effects of the time-delay on the temperature, stress and displacement distribution for different linear forms of Kernel functions are discussed. Numerical results are represented graphically and discussed.

• Geomechanics and Engineering
• /
• 제24권4호
• /
• pp.399-406
• /
• 2021

It is a key issue in the tunnel design to evaluate the stability of the excavation face. Two efficient analytical models in the context of the limit equilibrium method (LEM) and the limit analysis method (LAM) are used to carry out the deterministic calculations of the safety factor. The safety factor obtained by these two models agrees well with that provided by the numerical modelling by FLAC 3D, but consuming less time. A simple probabilistic approach based on the Mote-Carlo Simulation technique which can quickly calculate the probability distribution of the safety factor was used to perform the probabilistic analysis on the tunnel face stability. Both the cumulative probabilistic distribution and the probability density function in terms of the safety factor were obtained. The obtained results show the effectiveness of this probabilistic approach in the tunnel design.

• Structural Engineering and Mechanics
• /
• 제9권3호
• /
• pp.215-226
• /
• 2000

Computational procedure within the framework of return mapping technique has been presented to integrate the constitutive behavior of a concrete model. Developed by Ohtani and Chen, this concrete model is based on multiple hardening concept, and is rate-independent and associative. Consistent tangent operator suitable for finite element analysis is derived to preserve the rate of convergence. Accuracy of the integration technique is verified and compared with available experimental data. Computational efficiency is demonstrated by comparing with results based on elasto-plastic tangent.

• Structural Engineering and Mechanics
• /
• 제8권2호
• /
• pp.193-205
• /
• 1999

A formulation for the dynamic stability analysis of cylindrical shells resting on elastic foundations is presented. In this previously not studied problem, a normal-mode expansion of the partial differential equations of motion, which includes the effects of the foundation as well as a harmonic axial loading, yields a system of Mathieu-Hill equations the stability of which is analyzed using Bolotin's method. The present study examines the effects of the elastic foundation on the instability regions of the cylindrical shell for the transverse, longitudinal and circumferential modes.

• Wind and Structures
• /
• 제9권6호
• /
• pp.473-492
• /
• 2006

This paper presents numerical results of pedestrian-level wind environment around the base of a row of tall buildings by CFD. Four configurations of building arrangement are computed including a single square tall building. Computed results of pedestrian-level wind flow patterns and wind speeds are compared to previous wind tunnel measurement data to enable an assessment of CFD predictions. The CFD model uses the finite-volume method with RNG $k-{\varepsilon}$ model for turbulence closure. It is found that the numerical results can reproduce key features of pedestrian-level wind environment such as corner streams around corners of upwind building, sheltered zones behind buildings and channeled high-speed flow through a building gap. However, there are some differences between CFD results and wind tunnel data in the wind speed distribution and locations of highest wind speeds inside the corner streams. In locations of high ground-level wind speeds, CFD values match wind tunnel data within ${\pm}10%$.

• Wind and Structures
• /
• 제21권1호
• /
• pp.63-84
• /
• 2015

The shape of a tall building has significant impact on wind force generation and wind-induced dynamic response. To study the effect of recessed cavities, wind excitations on a wind-tunnel model of an H-section tall building were compared with those on a square-section building model. Characteristics of the fluctuating wind pressures on the side faces of the two tall buildings and their role in the generation of crosswind forces on the buildings were investigated with the space-time statistical tool of proper orthogonal decomposition (POD). This paper also compares the use of different pressure data sets for POD analysis in situations where pressures on two different surfaces are responsible for the generation of a wind force. The first POD mode is found to dominate the generation of crosswind excitation on the buildings.