• Steel and Composite Structures
• /
• v.35 no.3
• /
• pp.439-447
• /
• 2020

This paper presents two sets of full three-dimensional thermoelastic finite element analyses of superimposed thermo-mechanically loaded Spar Wingskin Joints made with laminated Graphite Fiber Reinforced Plastic composites. The study emphasizes the influence of residual thermal stresses and material anisotropy on the inter-laminar delamination behavior of the joint structure. The delamination has been pre-embedded at the most likely location, i.e., in resin layer between the top and next ply of the fiber reinforced plastic laminated wingskin and near the spar overlap end. Multi-Point Constraint finite elements have been made use of at the vicinity of the delamination fronts. This helps in simulating the growth of the embedded delamination at both ends. The inter-laminar thermoelastic peel and shear stresses responsible for causing delamination damage due to a combined thermal and a static loading have been evaluated. Strain energy release rate components corresponding to the Mode I (opening), Mode II (sliding) and Mode III (tearing) of delamination are determined using the principle of Virtual Crack Closure Technique. These are seen to be different and non-self-similar at the two fronts of the embedded delamination. Residual stresses developed due to the thermoelastic anisotropy of the laminae are found to strongly influence the delamination onset and propagation characteristics, which have been reflected by the asymmetries in the nature of energy release rate plots and their significant variation along the delamination front.

• Computers and Concrete
• /
• v.33 no.5
• /
• pp.559-572
• /
• 2024

Problems of under-sized dams (small dams with large basin area) could get worse under the global warming condition. This study evaluates the possible change of these problems with the Namgang Dam, an under-sized dam in Korea. For this purpose, first, this study simulates the dam inflow data using a rainfall-runoff model, which are then used as input for the reservoir operation. As a result, daily dam storage, dam release, and dam water supply are derived and compared for both past observed period (1973~2022) and future simulated period (2006~2099) based on the global warming scenarios. Summarizing the results are as follows. First, the inflow rate in the future is expected to be increased significantly. The maximum inflow could be twice of that observed in the past. As a result, it is also expected that the frequency of the water level reaching the high level is increasing. Also, the amount and frequency of dam release are to be increased in the future period. More seriously, this increase is expected to be concentrated on rather extreme cases with large dam release volume. Simply, the condition for flood protection in the downstream of the Namgang Dam is becoming worse and worse. Ironically, the severity of water shortage problem is also expected to become much worse. As the most extreme case, the frequency of no water supply was zero in the observed period, but in the future period, it becomes once every five years. Both the maximum consecutive shortage days and the total shortage volume are expected to become more than twice in the future period. To prevent or mitigate this coming problem of an under-sized dam, the only countermeasure at this moment seems to be its redevelopment. Simply a bigger dam with larger dam reservoir can handle this adverse effect more easily.

• Journal of the Korea Society of Computer and Information
• /
• v.18 no.12
• /
• pp.103-111
• /
• 2013

At present, a variety of Korean news stories have been about important online content and its importance in the press is becoming higher. Diverse news from businesses are provided to the public as press releases through newspapers or broadcasting media. For such news to become information for a press release, enterprises visit reporters, use e-mails, faxes, or couriers to deliver the information. However, such methods have problems with time, human resources, expenses, and file damage. Also, with these methods it is bothersome for enterprises to check what has been released and for the press to make frequent contact with enterprises for interviews and for content to be released. Therefore, this study aimed to realize a distribution system which enterprises can use to distribute data to be released to the press and to easily check what is to be released while the press can ask for interview requests in a simple way, as well as a news gathering robot that can collects news on the enterprises involved from articles online or in portal sites.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.25 no.3
• /
• pp.9-17
• /
• 2017

Incheon International Airport is total number of passengers using that increased by 8.3 percent year-on-year, with the highest level of user ratings since the opening of the previous year. Thus, After analyzing the positive image of Incheon International Airport and analyzing future corporate image development, the company conducted a study on improving the image of Incheon International Airport. Based on the SERVQUAL method, the study classified the five types of SERVQUAL. The difference in the distinctions of the media coverage varied, and the differences in the credibility of the media show that the differences between the press and the credibility of the media are not reflected in the characteristics of the media. These findings will provide data for the managerial control of corporate images based on positive or negative reporting on the Incheon International Airport, and based on the analysis of the findings, it is believed that it will benefit from being the most high-profile airport.

• Journal of the Korean Society of Safety
• /
• v.38 no.2
• /
• pp.1-7
• /
• 2023

Fiber-metal laminates (FMLs) and polymer matrix composites (PMCs) are formed in various ways. In particular, FMLs in which aluminum is laminated as a reinforced layer are widely used. Also, glass fiber-reinforced plastics (GFRPs) are generally applied as fiber laminates. The bonding interface layer between the aluminum and fiber laminate exhibits low strength when subjected to hot press fabrication in the event of delamination fracture at the interface. This study presents a simple method for strengthening the interface bonding between the aluminum metal and GFRP layer of FML composites. The surfaces of the aluminum interface layer are engraved with three kinds of patterns by using the laser machine before the hot press works. Furthermore, the effect of the laser patterns on the interfacial toughness is investigated. The interfacial toughness was evaluated by the energy release rate (G) using an asymmetric double cantilever bending specimen (ADCB). From the experimental results, it was shown that the strip type pattern (STP) has the most proper pattern shape in GFRP/Al FML composites. Therefore, this will be considered a useful method for the safety assessment of FML composite structures.

• Advances in nano research
• /
• v.12 no.5
• /
• pp.501-514
• /
• 2022

This study aimed to investigate the effects and potential mechanisms of Chikusetsusaponin V (CsV) on endothelial nitric oxide synthase (eNOS) and vascular endothelial cell functions. Different concentrations of CsV were added to animal models, bovine aorta endothelial cells (BAECs) and human umbilical vein endothelial cells (HUVECs) cultured in vitro. qPCR, Western blotting (WB), and B ultrasound were performed to explore the effects of CsV on mouse endothelial cell functions, vascular stiffness and cellular eNOS mRNA, protein expression and NO release. Bioinformatics analysis, network pharmacology, molecular docking and protein mass spectrometry analysis were conducted to jointly predict the upstream transcription factors of eNOS. Furthermore, pulldown and ChIP and dual luciferase assays were employed for subsequent verification. At the presence or absence of CsV stimulation, either overexpression or knockdown of purine rich element binding protein A (PURA) was conducted, and PCR assay was employed to detect PURA and eNOS mRNA expressions, Western blot was used to detect PURA and eNOS protein expressions, cell NO release and serum NO levels. Tube formation experiment was conducted to detect the tube forming capability of HUVECs cells. The animal vasodilation function test detected the vasodilation functions. Ultrasonic detection was performed to determine the mouse aortic arch pulse wave velocity to identify aortic stiffness. CsV stimulus on bovine aortic cells revealed that CsV could upregulate eNOS protein levels in vascular endothelial cells in a concentration and time dependent manner. The expression levels of eNOS mRNA and phosphorylation sites Ser1177, Ser633 and Thr495 increased significantly after CsV stimulation. Meanwhile, CsV could also enhance the tube forming capability of HUVECs cells. Following the mice were gavaged using CsV, the eNOS protein level of mouse aortic endothelial cells was upregulated in a concentration- and time-dependent manner, and serum NO release and vasodilation ability were simultaneously elevated whereas arterial stiffness was alleviated. The pulldown, ChIP and dual luciferase assays demonstrated that PURA could bind to the eNOS promoter and facilitate the transcription of eNOS. Under the conditions of presence or absence of CsV stimulation, overexpression or knockdown of PURA indicated that the effect of CsV on vascular endothelial function and eNOS was weakened following PURA gene silence, whereas overexpression of PURA gene could enhance the effect of CsV upregulating eNOS expression. CsV could promote NO release from endothelial cells by upregulating the expression of PURA/eNOS pathway, improve endothelial cell functions, enhance vasodilation capability, and alleviate vessel stiffness. The present study plays a role in offering a theoretical basis for the development and application of CsV in vascular function improvement, and it also provides a more comprehensive understanding of the pharmacodynamics of CsV.

• Structural Engineering and Mechanics
• /
• v.20 no.2
• /
• pp.143-160
• /
• 2005

Modal analysis of cracked cantilever composite beams, made of graphite-fibre reinforced polyamide, is studied. By using the finite element and component mode synthesis methods, a numeric model applicable to investigate the vibration of cracked composite beams is developed. In this new approach, from the crack section, the composite beam separated into two parts coupled by a flexibility matrix taking into account the interaction forces. These forces are derived from the fracture mechanics theory as the inverse of the compliance matrix calculated with the proper stress intensity factors and strain energy release rate expressions. Numerical results are obtained for modal analysis of composite beams with a transverse non-propagating open crack, addressing the effects of the location and depth of the crack, and the volume fraction and orientation of the fibre on the natural frequencies and mode shapes. By means of modal data, the position and dimension of the defect can be found. The results of the study confirmed that presented method is suitable for the vibration analysis of cracked cantilever composite beams. Present technique can be easily extended to composite plates and shells.

• Advances in environmental research
• /
• v.2 no.3
• /
• pp.179-202
• /
• 2013

Bisphenol A and other alkylphenols are widely used in plastic and other industrial consumer products. Release of these compounds into the aquatic environment during their manufacture, use and disposal has been a great scientific and public concern due to their toxicity at high concentrations and endocrine disrupting effects at low concentration on aquatic wildlife and human beings. This paper reviews the published data and researches on the environmental occurrence, distribution, health effects and analytical techniques of bisphenol A and alkylphenols. The aim is to provide an overview of the current understanding about bisphenol A and alkylphenols in the environment and the difficulties faced today in order to establish standard and systematic environmental analysis and assessment process for these endocrine disruptor compounds.

• Proceedings of the Korea Technology Innovation Society Conference
• /
• 2015.05a
• /
• pp.508-525
• /
• 2015

The purpose of this study is to derive the demands to develop marine science technology to reduce damage of disasters caused by boating accidents. This study analyzed the press release to identify the factors of damages that can result from boating accidents and derive the demands for technology development to approach from the perspective of marine science technology to avoid the elements of damage. For this purpose, this study analyzed the contents of about 77,000 articles posted for a month after the tragedy of the Sewol (April 16 - May 15) to derive the keywords and used SNA for the network analysis of each keyword. The findings of the analysis showed that there were five networks and each network consisted of different aspects of technology development to prepare for the marine disasters. Based on these findings, this study derived the demands for technology development from the perspective of marine science technology required to prepare for the possible marine disasters caused by vessels in the future.

• Journal of Biosystems Engineering
• /
• v.23 no.3
• /
• pp.271-276
• /
• 1998

A gripper mechanical design using a pneumatic system was developed to successfully grip, hold, and release a seedling plug for transplanting it. The gripper comprised of two air cylinders and shovel-type fingers. The gripper can grasp and hold a seedling by sliding the two fingers attached to the two separate air-cylinders, mounted at an angle of 15$^{\circ}$ When releasing a plug, retraction of the fingers gives a seedling little attachment to the gripper. To prevent seedling from attaching to the fingers, press-plates were attached to the end of the gipper. Transplanting performance of the developed gripper was tested with cucumber seedlings at different soil moisture contents. Overall transplanting performance of developed gipper was higher than the performance of the previously developed gripper. Best transplanting result was achieved at medium level of soil moisture content.