• Journal of the Korean Wood Science and Technology
• /
• v.22 no.4
• /
• pp.13-18
• /
• 1994

Sapwood samples of pitch pine were treated with disodium octaborate alone by dip-diffusion, or in combination with water-repellent preservative(WRP) and methyl metacrylate(MMA). Treated samples were subjected to an accelerated leaching test for determining the improvement of leaching resistance and to soft rot and mold tests for evaluating the increase in bioefficacy, due to the addition of WRP and MMA applied as a second treatment. The addition of WRP and MMA retarded leaching of boron to some extent from treated samples and this retardation can be explained by improved water repellency of WRP and MMA treated samples. Borate /WRP and borate /MMA systems will not qualify borate treated wood for ground and fresh water contact use but may improve performance of borate treated wood in above-ground applications not subjected to continuous wetting conditions. Bioefficacy against soft rot fungi and mold fungi was improved by a second treatment with WRP. However, improvement in the performance of borate /MMA systems was not observed. Considering improvement in both resistance of leaching and bioefficacy against micro fungi by the treatment of WRP and MMA, simultaneously, the dual treatment of borate treated wood by MMA containing co-biocides might be believed as an ideal treatment system.

• Journal of agriculture & life science
• /
• v.45 no.1
• /
• pp.59-66
• /
• 2011

This study was conducted to investigate the effect of vase material and floral preservative treatment over time on flower color, leaf color and flower size of cut flowers Rosa hybrida 'Aqua' and 'Corvernet', and Gerbera jamesonii 'Honeymoon' and 'Golden Time' stuck in a glass, porcelain, or onggi (pottery with a dark bronze glaze) vase containing either tap water or a floral preservative solution. The ${\Delta}E$ values in flower color of 'Aqua' rose at 8 days after treatment with a floral preservative in onggi and porcelain vases were low. The ${\Delta}E$ value of 'Covernet' rose treated with floral preservative in an onggi vase was the lowest and L value was the closest to that of petals of cut flowers at just before treatment (control). The ${\Delta}E$ value of 'Honeymoon' gerbera treated with a floral preservative in an onggi vase was the lowest and a value of 58.81 and b value of 34.29 were the closest to that of the control group as color of cut flowers in an onggi vase was similar to the color at the beginning of treatment. The ${\Delta}E$ value of 'Golden Time' gerbera treated in an onggi vase was significantly lower than that in a porcelain or glass vase and a value of -7.81 treated with a floral preservative solution in an onggi vase was the closest to the control and b value was high in an onggi vase as well. The L, a, and b values in leaf color of roses were similar to each value of the control and ${\Delta}E$ value of 3.25 measured in an onggi vase was lower than that in a porcelain or glass vase. Flower diameter of 'Covernet' and 'Golden Time' roses treated with a floral preservative in an onggi vase was greater than that in other treatments. From these results, the floral preservative applied to a holding solution is assumed to improve the quality and freshness of cut roses and gerberas by inhibiting microbes propagation and by promoting uptake of water and nutrients. The onggi vase with fine pores will promote the expression and maintenance of flower and leaf colors and may increase flower diameter by high air permeability.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.16 no.4
• /
• pp.315-326
• /
• 1996

An experiment was carried out to determine effect of cultivar, drying agent concentration and preservative on the moisture content, temperature and quality changes of fall harvested oat(Avena sativa L.) hay during field curing and storage. The main plots consisted of the cultivar such as 'Foothill' and 'Swan', the subplots consisted of drying agent concentration such as 7Skg/ha(C1), lOSkglha(C2) and control(C0) and the sub-subplots consisted of preservative such as buffered acid(BA), lactic bacteria inoculant(LB) and control(C0). Moisture contents of 'Foothill' and 'Swan' oat cultivar at harvest were 635.5 and 385.4%DW(Dry weight), respectively, but the final moisture contents of the oat cultivars were 117 and 86%DW. The moisture content of cut oat was not affeded by drying agent concentration. Core temperature of baled 'Swan' oat hay was a little higher than that of 'Foothill' and no consistent preservative effect was found. Total nitrogen content of 'Swan' oat hay was 3.08% and that of 'Foothill' oat hay was 3.45%(P<0.05). Drying agent treatment increased total nitrogen content of 'Swan'(P <0.05), but preservative had no effect. Crude fiber content of oat cultivar was increased as the curing progressed(P<0.05) and the difference of crude fiber content of oat cultivar was maintained through the whole curing period. Effect of drying agent concentration on crude fiber content was not found after preservation. Crude fiber content of 'Swan' oat hay was higher than that of 'Foothill' by 1.O% in ADF and 3.1 % in NDF(P<0.05). No preservative effect was found in crude fiber content. According to RFV of oat cultivar at harvest, forage quality of 'Foothill' and 'Swan' was Prime and Grade 1, respectively, but that of both cultivm was above Grade 2 at the final curing day. RFV of the stored 'Foothill' and 'Swan' oat hay was 122 and 114(P<0.05), respectively, and the quality of oat hay was classified as Grade 1 and 2, respectively, according to the forage quality standard assigned by AFGC.

• Journal of the Korean Wood Science and Technology
• /
• v.38 no.5
• /
• pp.450-456
• /
• 2010

This research was performed to develop the simple techniques to predict the copper concentration in alkaline copper quat (ACQ), copper azole (CUAZ), and bis-(N-cyclohexyl-diazeniumdioxy)-copper (CB-HDO) solutions. Two simple methods measuring the color due to copper compounds were evaluated by using a spectrophotometer. One is to directly measure the color of the preservative solutions. The other is to measure the color developed on the surface of a treated sample with the preservatives. The $L^*$ of the measured color values appeared to be the most sensitive to the change of copper concentration. The $a^*$ values of the preservative solutions tended to be decreased at above a certain concentration condition, and the $b^*$ values showed no trend with the concentration of copper compounds in preservative solutions. The surface color of the treated samples were changed from bluish to greenish as time passed. Both methods showed the high $R^2$ values of the regression models determined by using the lightness, which suggested that the methods might be applicable in preservative-treatment mills for the easy and fast prediction of the copper concentration.

• Journal of the Korean Wood Science and Technology
• /
• v.42 no.4
• /
• pp.491-498
• /
• 2014

In order to obtain basic data for concentration control of alkaline copper quat (ACQ) solution in wood preservative treatment, this study investigates the change of concentration and adsorption of treating solution and active ingredient, copper oxide (CuO) and didecyldimethyl ammonium chloride (DDAC), in the process of recycling of ACQ solution. Japanese larch (Larix leptolepis), Douglas-fir (Psedotsuga menziesii) and Radiata pine (Pinus radiata) were treated with ACQ solution. The active ingredient concentration of ACQ solution was decreased continuously with increase of recycling. There are differences between extent of concentration decrease of Cu (as CuO) and DDAC. DDAC was decreased more quickly and to a higher degree than Cu for all recycling. The extent of DDAC concentration decrease was remarkable than that of Cu for wood species. The amount of DDAC adsorbed into wood decreased with the increase of ACQ solution recycling, but adsorption of Cu was little difference regardless of recycling. The adsorption of Cu into wood increased as DDAC concentration decrease by recycling of ACQ solution. This is likely due to decrease of DDAC competition with Cu for the same reaction site in wood.

• Journal of the Korean Wood Science and Technology
• /
• v.13 no.2
• /
• pp.35-44
• /
• 1985

The purposes of this study were, first, to investigate retention levels of toxic elements and oxide individual plies for each panel and, second, to examine disproportioning of individual toxic elements Thirty five water gum plywood panels were treated with a copper-chromium-arsenic preservative (CCA) by the soaking process as the treament time were applied. Such individual plies at a distance of 2.5cm, 7.5cm from the edge were assayed for CuO, $CrO_3$, and $As_2O_5$ on the basis of copper, chromium and arsenic content by Atomic Absorption Spectrophotometry. In these experiments, 12mm thickness plywood panels made of water gum, which were selling, were selected for the preservative treatment. Treating solutions were prepared for 10%, dilute solution of copper-chromium-arsenic preservative and then 1, 3, 6, 12 and 24 hours soaking trements in CCA preservative were applied. The results obtained are as follows: 1. The retention of total oxide in the face and back plies (1+7) retained more than the retention of total oxide in the other plies. The total oxide retention for the individual plies except the face and back plies (1+7) was showed in the following orders; cross plies (3+5), cross plies (2+6), core ply (4). 2. The retentions of total oxide increased as the increase of treatment time. The CCA treated plywood retained high levels of total oxide retention in the face and back plies (1+7). 3. All the retentions in the face and back plies (1+7) is over 5Kg/$m^3$, New Zealand Timber Preservation Standards Specification, and after 6 hours, the retentions in the cross plies (3+5) is over 4. The relative penetration of copper, chromium, and arsenic were not affected by the treatment time. The proportion of arsenic decreased in relation to both copper and chromium and the proportion of copper increased in relation to both chromium and arsenic. 5. A disproportioning of copper, chromium occurred with longer distance from edge, and with longer distance from edge the leachability resistance of CCA treated specimens decreased. After 6 hours (soaking time), the proportion of active elements at a distance of 2.5cm from the edge was consistent. And after 24 hours-soaking, the proportion of active elements at a distance of 7.5cm from the edge was consistent.

• Journal of the Korean Wood Science and Technology
• /
• v.38 no.4
• /
• pp.306-315
• /
• 2010

The stress laminated timber, which could be manufactured by small dimension lumber on construction site, has high possibilities for bridges in remote area, such as recreation forest or forest road, because those bridges may be short span and low frequency in use. The stress laminated timber has merits of easiness for preservative treatment and transportation because it is manufactured with small dimension lumber. This study was carried out to analyze performances of stress laminated timber manufactured with preservative treated domestic pitch pine for developing structural design data for stress laminated timber bridges for vehicular traffic. Perpendicular to grain compressive performance by preservative treatment and bending performance by bored holes of pitch pine lumber was analyzed. Then, the effects of bending performance by pre-stress pressure, distance of bolts, number of laminations and planning were analyzed. Conclusively, planning of lumber was not necessary for manufacturing stress laminated timber, and 80% of bending stiffness criteria was maintained as pre-stress pressure was higher than 3.0 kg/$cm^2$. However, further researches are needed to define the effects of bolt distances and number of laminations. The results of this research would be basic data for design stress laminated timber bridges for vehicular traffic in Korea.

• Journal of Korean Society of Forest Science
• /
• v.2 no.1
• /
• pp.37-40
• /
• 1962

1) The greater parts of rail road cross tie wood in Korea have been supplied by the imported woods from foreign countries such as Formosa (Taiwan) and Japan. However on account of anatomical properties on these imported woods are not known when newly imported, identification and preservative treatment are apt to fail. Accordingly this expriment was accomplished by the need of application of anatomical properties for the preservative treatment and identification of several imported woods. 2) In this study macroscopical and microscopical properties were inspected and briefly described about four species (Cyclobalanopsis gilva Blume, Castanopsis longicaudata K. et H., Machilus longiflora Hay and Schima superba Gard et Champ) from Formosa and one (Fagus crenata, Blume) from Japan. With several native species these are important as the rail road tie wood in Korea. 3) According to the results measured values of the vessels and fibers of each tested species are as following table.

• Journal of the Korean Academy of Clinical Electrophysiology
• /
• v.2 no.1
• /
• pp.93-100
• /
• 2004

Shoulder impingement syndrome is cause by the collision of acromion, acrominoclaviclar joint, coracoacromino ligament, coracoid process and synovial sac, biceps brachiialis tendon, rotator cuff muscle. Treatment for Shoulder impingement syndrome is genetally classified into two different methods; preservative method and operational method. Operational method includes rotator cuff sutura, anterior acromioplasty, arthroscope decompression. Preservative method includes rest, medicinal therapy, physical therapy. Physical therapy concentrates on pain control, functional recovery and prevention of disease progress. It is also important for physical therapy to maintain the strength of rotator cuff. Strengthening rotator cuff decreases the collision and helps the stability of shoulder joint. In conclusion, it must be aware that shoulder impingement syndrome and some other shoulder problem demand different treatment, which results in a better outcome.

• Journal of the Korean Wood Science and Technology
• /
• v.36 no.3
• /
• pp.47-54
• /
• 2008

To make up original defects of the wooden materials for decks, and to supply the wooden material for outdoor, we fabricated preservative treated plywood(PTP). Copper azole (CUAZ-1) preservative was treated with a normal full-cell process. Bond Strength of PTP was not affected after the preservative treatment. The anti-fungal efficiency and dimensional stability were obtained from PTP. A little discoloration of the surface was detected, but the dimensional change or peel bonded area off were not observed after accelerated weathering test. Although some strength of PTP was reduced after 17 months of field exposure, the PTP should be applicable for outdoor applications.