• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 춘계 학술발표회 제16권1호
• /
• pp.408-411
• /
• 2004

The presence of voids behind tunnel linings results in their deterioration. One proposed method of effectively detecting such voids by non-destructive means is radar. This research is devoted to quantitatively evaluating the efficiency of such non-destructive tests with radar. As a foundation to this ongoing research, which aims to acquire directional information and estimate the shape of specific voids using radar of three-dipole antenna type, an investigation of microwave polarization methods is carried out with various void orientations and void geometries. As the results, it is clarified that the response of microwave polarization modes depends on void geometry and thus there is a possibility of identifying the geometry and orientation of specific voids using radar of three-dipole antenna type.

• 한국염색가공학회:학술대회논문집
• /
• 한국염색가공학회 2012년도 제46차 학술발표회
• /
• pp.26-26
• /
• 2012

The hydrophobic nature of the wool surface give rise to difficult penetration of dye molecules. Among all the methods of modification, graft polymerization is an attractive method to impart a variety of functional groups to a polymer. Grafting has been made by irradiating the light on the polymer in the presence of a solvent containing monomer. The energy source commonly used are high-energy electrons, X-rays, UV and visible light. UV irradiation is a relatively low-energy radiation in comparison with others since it has the least possibility to change bulk properties. In the present paper, a photo-reactive dye was synthesized from quinizarin by the reaction with methacryloyl chloride. The synthesized dye was continuously grafted onto wool fabric at room temperature by UV irradiation. Several key parameters including UV energy, dye concentration and pH have been examined to understand their influence on the photoreactive coloration.

• Structural Engineering and Mechanics
• /
• 제47권3호
• /
• pp.307-329
• /
• 2013

The bending problem of Euler-Bernoulli discontinuous beams is dealt with, in which the discontinuities are due to the loads and eventually to essential constrains applied along the beam axis. In particular, the loads are modelled as random delta-correlated processes acting along the beam axis, while the ulterior eventual discontinuities are produced by the presence of external rollers applied along the beam axis. This kind of structural model can be considered in the static study of bridge beams. In the present work the exact expression of the response quantities are given in terms of means and variances, thanks to the use of the stochastic analysis rules and to the use of the generalized functions. The knowledge of the means and the variances of the internal forces implies the possibility of applying the reliability ${\beta}$-method for verifying the beam.

• 대한치과의사협회지
• /
• 제50권12호
• /
• pp.732-742
• /
• 2012

White lesions of the oral mucosa are a common clinical finding that often present first to general dentist. Some white lesion may have possibility of malignancy. Leukoplakia is the most common "potentially malignant disorder" of the oral mucosa. Leukoplakia is at present defined as "A white plaque of questionable risk having excluded (other) known disease or disorders that carry no increased risk for cancer.". Therefore, it is important for general dentist to be familiar to clinical differential diagnosis of leukoplakia from the known white lesions such as candidiasis, lichen planus, leukoedema, frictional keratosis, and so on. It is also important to decide whether such lesions require further investigation through the biopsy. As a result of biopsy, the presence of epithelial dysplasia in the leukoplakia is still the strongest predictor of future malignant transformation. In this article, oral white lesions that must be differentiated from potentially malignant disorders or early invasive squamous cell carcinoma will be reviewed together with presenting clinical cases.

• 한국결정성장학회지
• /
• 제13권6호
• /
• pp.261-266
• /
• 2003

결정질 규소를 이용한 태양전지의 제조에 필요한 texture 식각 공정에 초음파를 적용하였다. 이 결과 $60^{\circ}C$에서 초음파를 적용하여 식각된 규소 기판으로 제조된 태양전지의 광전변환효율이 기존의 방식대로 $70^{\circ}C$에서 초음파 없이 식각된 규소 기판으로 제조된 태양전지의 광전변환효율보다 높았다. 이 결과는 규소를 이용한 태양전지의 제조에 필요한 식각공정에서 초음파를 적용하면 공정 온도를 낮출 수 있고 또한 사용되는 고가의 용액을 줄일 수 있어 전체적으로 태양전지의 제조 가격을 낮출 수 있는 가능성을 보여준다.

• Carbon letters
• /
• 제11권2호
• /
• pp.112-116
• /
• 2010

The objective of this study was to evaluate the possibility of simultaneous removal of ammonium, nitrate and phosphorus in water using the zeocarbon. In this study, the surface of zeocarbon was modified by acid because of difficulty in application of water treatment. After surface modification, the strength was enhanced about 62% higher than that of original one. The removal efficiency of ammonium and nitrate using the modified zeocarbon was about 47% and 32%, respectively and were higher than that of zeocarbon. In batch type experiment on the simultaneous removal of ammonium, nitrate and phosphorus, the presence of phosphorus did not have influence on nitrogen removal efficiency. Concomitantly, removal efficiency of phosphorus was obtained was about 35%. This indicates that the surface modified zeocarbon can be applied for simultaneous removal of nitrogen and phosphorus. Consequently, our results could be used as basic data to design of one-stage nitrogen/phosphorus simultaneous removal system.

• Bulletin of the Korean Chemical Society
• /
• 제32권7호
• /
• pp.2332-2338
• /
• 2011

In this study, we proposed a new promising idea of utilizing moving window principal component analysis (MWPCA) as a sensitive diagnostic tool to detect the presence of peak position shift. In this approach, the moving window is constructed from a small data segment along the wavenumber axis. For each window bound by a narrow wavenumber region, separate PCA analysis was applied. Simulated spectra with complex spectral feature variations were analyzed to explore the possibility of MWPCA technique. This MWPCA-based detection of the peak shift, potentially coupled with 2D correlation analysis to provide additional verification, may offer an attractive solution.

• Toxicological Research
• /
• 제22권1호
• /
• pp.39-45
• /
• 2006

As the antioxidant and free radical scavenger, glutathione (GSH) participates in the preservation of cellular redox status and defense against reactive oxygen species and xenobiotics. Glutamate-cysteine ligase (GCL; also known as ${\gamma}$-glutamylcysteine synthetase, EC 6.3.2.2) is the rate limiting enzyme in GSH synthesis. In the present study, the accurate method for determination of GCL activity in crude liver extracts was developed by measuring both ${\gamma}$-glutamylcysteine and GSH from cysteine in the presence of glutamate, glycine and an ATP-generating system. We added glycine to promote the conversion of ${\gamma}$-glutamylcysteine to GSH, and to minimize the possibility of ${\gamma}$-glutamylcysteine metabolism to cysteine and oxoproline by ${\gamma}$-glutamylcyclotransferase. We established optimal conditions and substrate concentrations for the enzyme assay, and verified that inhibition of GCL by GSH did not interfere with this assay. Therefore, this assay of hepatic GCL under optimal conditions could provide a more accurate measurement of this enzyme activity in the crude liver extracts.

• Journal of Korean Neurosurgical Society
• /
• 제45권5호
• /
• pp.297-299
• /
• 2009

We present two rare cases of anomalous vertebral artery (VA) with retroesophaqeal right subclavian artery. One patient had a right VA arising from the right common carotid artery (CCA), and a left VA originating from the third branch off the aorta. Both VAs ascended anteriorly to the transverse foramen of C5 to C6 vertebra and entered the transverse foramen of C4. The other patient had a right VA arising from the right CCA and entering the transverse foramen of C5. The presence of anomalous variations of the oriqin and course of vertebral artery might have serious implications in anqioqraphic and surgical procedures, and it is of great importance to be aware of such a possibility.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집A
• /
• pp.541-546
• /
• 2001

Application of bonding by adhesives can be found in many industries, particularly in advanced technological domains such as the aeronautical and space industries, automobile manufacture, and electronics. Periodic inspection with conventional ultrasonic NDE techniques is capable of indicating the presence and possible location of crack. Continuous ultrasonic attenuation monitoring has potential to supply information. This study used adhesive-bonded single-lap joints specimen to evaluate such possibility by ultrasonic signal processing method.