• International Journal of Computer Science & Network Security
• /
• v.22 no.6
• /
• pp.25-32
• /
• 2022

The hypothesis of the study of the article is that the use of elements of artificial intelligence will increase the effectiveness of the educational process of the university if: a set of pedagogical conditions for the construction and use of an expert system with elements of artificial intelligence in the educational process of the university is revealed; a model for preparing a future teacher of vocational training for the use of elements of artificial intelligence has been developed; a special course has been developed that contributes to the implementation of the professional orientation of education. In accordance with this, the following tasks were studied in the article: An analysis of scientific and methodological research in the field of the current state, prospects for the development and use of elements of artificial intelligence in the preparation of a future teacher of vocational training and to determine the dynamics of the introduction of intelligent expert systems in education; A set of pedagogical conditions for the construction and use of an expert system with elements of artificial intelligence in the educational process of a university is revealed; It is substantiated to develop a model for preparing a teacher of vocational training to use elements of artificial intelligence.

• The Journal of Korean Physical Therapy
• /
• v.10 no.1
• /
• pp.223-227
• /
• 1998

The purpose of this study was to determine of the present conditions and course of Korea physical therapy. As reviewing the curriculums for physical therapy education, the system for physical therapist licence issue. and working condition of physical therapist have been suggested a strategy far specialization of physical therapist and course of Korea physical therapy. Based on the research results, the following considerations and guidelines are presented. 1. Need to specialization of curriculum for physical therapy education. 2. For increase quality of treatment, decrease the number of patient per daily treatment by a physical therapist. 3. Specialization of physical therapist role at department of physical therapy, university hospital and general hospital. 4. Establishing physical therapy residency program at university hospital and general hospital. 5. Preparing the law for independent clime open of physical therapist.

• The Korean Journal of Rehabilitation Nursing
• /
• v.14 no.1
• /
• pp.13-23
• /
• 2011

Purpose: The purpose of this study was to explore and describe the essence of hospital life concerning discharge from rehabilitation facility as defined by clients with complete quadriplegia. Method: This was a qualitative research using Giorgi's descriptive phenomenology. Four participants with complete quadriplegia were participated. Results: The lived experience of discharge from rehabilitation facility among clients with complete quadriplegia was structured by 10 components and was defined as a life event which those patients felt fears and worries to leave the therapeutic environment and to return to their community with various changes due to their disability. During their hospital stay, the patients with quadriplegia were concerning to prepare proper living conditions and their health conditions so that they could keep their life independent and worthy. They also cherished a hope for cure for their cervical injury even at the moment of discharge. Conclusion: This study suggests developing a discharge program which relieves the clients' emotional burden for discharge from inpatient rehabilitation facility and helps them to take an active role in preparing for returning to their daily life.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.12 no.3
• /
• pp.65-85
• /
• 2004

Circling to land is a relatively dangerous maneuver. It contains the worst elements of IFR flight. There is a minimum obstruction clearance, a limited space in which to maneuver, an absence of visual reference, and trying to keep the runway in sight while preparing to land. At night it is quite a bit more than dangerous. The required continuous turn in marginal conditions that keeps the airport in sight is hazardous. Therefore, this paper proposes an application of GNSS to circling approach to reduce or remove chances of accidents which may occur under such unfavorable flight conditions. The study reviews relevant documents published by ICAO and FAA and provides scenarios for non-precision and precision approaches and circling approach based on the GNSS for Kimhae airport. Also requirements for the ground facility design are studied and provided.

• Journal of the Korean Ceramic Society
• /
• v.33 no.8
• /
• pp.871-876
• /
• 1996

It is believed that fly ash could be suitable for preparing the sialon by carbothermal reduction method because the total amount of SiO2 and Al2O3 is above 80% and the unburned residual carbon is above 5% within the fly ash. The effects of reaction temperature (1350, 1400, 145$0^{\circ}C$) reaction time (1, 5, 10 hours) and the amount of carbon additions (C/SiO2=2, 3, 4 mole) on the $\beta$-sialon synthesis were obserbed, It was conformed that $\beta$-sialon (Z=2.15~2.18) was formed as major phase under all of the synthesis conditions and small amount of Si2ON2 SiC, AlN and Si3N4 was formed depending on the synthesis conditions. FeSix intermetal-lic compound was formed above 140$0^{\circ}C$ reaction temperature due to the large amount of iron oxides within the raw fly ash.

• 한국전산유체공학회:학술대회논문집
• /
• 2006.10a
• /
• pp.155-158
• /
• 2006

In the present paper, the scale effects of two-dimensional airfoil and three-dimensional wind turbine were investigated by using FLUENT software. For two dimensional analysis, flow around S809 airfoil with various Reynolds No. and Mach No. conditions were simulated. For three dimensional analysis, scaled NREL Phase VI wind turbine models from 6% to 1,600% were simulated under the same tip speed ratio condition. Finally, aerodynamic comparisons between two-dimensional flow and three dimensional wind turbine flow are made for the feasibility study of scale effect corrections. Currently, KARI(Korea Aerospace Research Institute) is preparing for the wind tunnel test of 12% NREL Phase VI wind turbine and the performance analysis of the scaled NREL wind turbine model will be validated by the wind tunnel test.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2002.08a
• /
• pp.217-220
• /
• 2002

In this paper, an accelerated lifetime test method of MgO thin film is suggested. The most important test factors are surface temperature of the PDP, gas pressure, the applied voltage and frequency. The standard test conditions are $50^{\circ}C$, 400Torr, 20% over voltage and 300kHz ,respectively. The accelerated lifetime of MgO is significantly varied with the MgO preparing conditions.

• Nuclear Engineering and Technology
• /
• v.53 no.8
• /
• pp.2761-2766
• /
• 2021

A method for preparing "reagent" for radioactive methyliodide vapors production using an isotopic exchange reaction has been developed. Based on the obtained data of the isotopic exchange efficiency and hydraulic resistance, white fused alumina (700-840 ㎛) was selected as the carrying agent material for "reagent" production. The radioiodine isotopic exchange dependences on such parameters as temperature, gas flow velocity, and the methyliodide concentration in it were determined. Optimal conditions have been selected to achieve 85% of the isotopic exchange rate in 1 h of the experiment. The obtained data allowed to develop an approach to the test of iodine filters for nuclear power plants and to determine their efficiency.

• Korean journal of food and cookery science
• /
• v.23 no.1 s.97
• /
• pp.1-8
• /
• 2007

Extraction conditions were optimized using response surface methodology for preparing high-quality, hot water extracts from cultivated Chrysanthemum indicum L. petals. A fractional factorial design was applied to investigate the effects of added sample ratio ($X_1$), extraction temperature ($X_2$) and extraction time ($X_3$) variables on extract properties, such as, soluble solid contents ($Y_1$), sugar content ($Y_2$), ?E ($Y_3$), turbidity ($Y_4$), total phenol ($Y_5$) and DPPH ($Y_6$). Second-order models were employed to generate a 3-dimensional response surface for dependent variables and their coefficients of determination ($R^2$) ranged from 0.8408${\sim}$0.9914. The range of optimum conditions at $80^{\circ}C$ extraction for maximize characteristics of hot water extracts was 2.3${\sim}$2.7 g and 9.2${\sim}$11.2 hr.

• Korean Chemical Engineering Research
• /
• v.61 no.2
• /
• pp.322-327
• /
• 2023

A design of experiments was evaluated in optimizing MOF-5 synthesis for acetylene adsorption. At first, mixture design was used to optimize precursor concentration, terephthalic acid, zinc acetate dihydrate and N,N-dimethylformamide. More specifically, 13 conditions with various molar ratios were designed by extreme vertices design method. After preparing the samples, XRD, N₂ physisorption and SEM analysis were performed for their characterization. Moreover, acetylene adsorption experiments were carried out over the samples under identical conditions. The optimal precursor composition for MOF-5 synthesis was predicted on a molar basis as follows: terephthalic acid : acetate dihydrate : dimethylformamide = 0.1 : 0.4 : 0.5. Thereafter, multi-level factorial design was designated to investigate the effect of synthesis reaction conditions such as temperature, time and stirring speed. By the statistical analysis of 18 samples designed, 4 reaction parameters were determined for additional adsorption experiments. Therefore, MOF-5 prepared under the synthesis time and temperature of 100 ℃ and 12 h, respectively, showed the maximum adsorption capacity of 15.1 mmol/g.