• Journal of the Society of Naval Architects of Korea
• /
• v.48 no.6
• /
• pp.575-580
• /
• 2011

Icing problem of ice-strengthened vessels is an important issue when operating in low temperature environment and it can cause damage to deck machineries and emergency equipments. Many ice-strengthened vessels have since been constructed and operated in accordance with the ice class rules such as Det Norske Veritas (DNV), Russian Maritime Register of Shipping (RS), American Bureau of Shipping (ABS) and so on. Therefore winterization is defined as the preparation of a ship for safe operation. In this research, anti-icing performance tests of weather-tight door have been carried out at various temperature conditions($5^{\circ}C$, $-10^{\circ}C$, $-20^{\circ}C$, $-30^{\circ}C$, $-40^{\circ}C$) in the low temperature cold room facility and then, ambient temperature, specimen temperature, electric current and temperature of heating cable were measured during the test operations. This research describes the construction guidelines of weather-tight door based on anti-icing test results to apply to the full-scale vessels.

• Nuclear Engineering and Technology
• /
• v.28 no.3
• /
• pp.257-264
• /
• 1996

The conventional Equipment Environment Qualification (EEQ) envelope is developed based on the containment responses during the design basis events. The Safety Depressurization System (SDS) design without In-containment Refueling Water Storage Tank (IRWST) adopted in the Ulchin 3&4 challenges the conventional EEQ envelope during long term Feed and Bleed (F&B) operation due to the direct discharge of high mass and energy into the containment. Therefore, it is necessary to confirm that the containment pressure and temperature history during the long term F&B operation does not violate the conventional EEQ envelope. However, this subject has never been quantitatively assessed before. To investigate the success path of long term F&B operation this paper analyzes the thermal hydraulic response of the containment and Reactor Coolant System (RCS) until the completion of depressurization and cooldown of RCS into Shutdown Cooling System (SCS) entry condition. It is found that the SCS entry condition can be reached within 6 hours without violating the EEQ curve by proper operation of SDS valves, High Pressure Safety Injection (HPSI) pumps and active Containment Heat Removal System (CHRS). The suggested strategy not only demonstrates the feasibility of long term F&B operation but also can be utilized in the preparation of Emergency Procedure Guidelines (EPGs)

• Food Science of Animal Resources
• /
• v.29 no.6
• /
• pp.673-679
• /
• 2009

To develop ready-to-eat (RTE) style Korean traditional Galbi-jjim, the optimal conditions for sous-vide cooking and cookchill preparation and the sensory properties of the cooked products were investigated. During heating, the meat core temperatures reached $85^{\circ}C$ within 30 min and 45 min when a water bath and combination oven were used, respectively. Chilling to $3^{\circ}C$ within 45 min was conducted to meet the standards for microbiological safety set by the UK Department of Health and Social Security (DHSS) Guideline. Galbi-jjim that was vacuum-cooked in a water bath was much more tender than that of Galbi-jjim prepared using the cook-chill method, but had no difference in any reheating methods. The average sensory scores of juiciness and the overall acceptance of Galbi-jjim were significantly higher when water bath cooking was used, and there were no differences in reheating methods. In conclusion, the serial methods of sous-vide processing and rapid chilling can be applied to produce RTE traditional Galbi-jjim, and this can be conducted while meeting the standards specified in safety guidelines.

• Restorative Dentistry and Endodontics
• /
• v.38 no.3
• /
• pp.105-112
• /
• 2013

While it is reasonably well known that certain dental procedures increase the temperature of the tooth's surface, of greater interest is their potential damaging effect on the pulp and tooth-supporting tissues. Previous studies have investigated the responses of the pulp, periodontal ligament, and alveolar bone to thermal irritation and the temperature at which thermal damage is initiated. There are also many in vitro studies that have measured the temperature increase of the pulp and tooth-supporting tissues during restorative and endodontic procedures. This review article provides an overview of studies measuring temperature increases in tooth structures during several restorative and endodontic procedures, and proposes clinical guidelines for reducing potential thermal hazards to the pulp and supporting tissues.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.19 no.1
• /
• pp.141-160
• /
• 2021

Unit 1 of the Kori Nuclear Power Plant (NPP) and Unit 1 of the Wolsong NPP are being prepared for decommissioning; their decommissioning is expected to generate large amounts of intermediate-level, low-level, and very low level Waste. Mixed waste containing both radioactive and hazardous substances is expected to be produced. Nevertheless, laws and regulations, such as the Korean Nuclear Safety Act and Waste Management Act, do not define clear regulatory guidelines for mixed waste. However, the United States has strictly enforced regulations on mixed waste, focusing on the human health and environmental effects of its hazardous components. The U.S. Nuclear Regulatory Commission and the U.S. Department of Energy regulate the radioactive components of mixed waste under the Atomic Energy Act. The U.S. Environmental Protection Agency regulates the hazardous waste component of mixed waste under the Resource Conservation and Recovery Act. In this study, the laws, regulations, and authorities pertaining to mixed waste in the United States are reviewed. Through comparison and analysis with waste management laws and regulations in Korea, a treatment direction for mixed waste is suggested. Such a treatment for mixed waste will increase the efficiency of managing mixed waste when decommissioning NPPs in the near future.

• Food Science of Animal Resources
• /
• v.41 no.4
• /
• pp.731-738
• /
• 2021

Herein, a novel analytical method using a high-performance liquid chromatography-fluorescence detector (HPLC/FLD) is developed for rapidly measuring an L-carnitine ester derivative in infant powdered milk. In this study, solid-phase extraction cartridges filled with derivatized methanol and distilled water were used to effectively separate L-carnitine. Protein precipitation pretreatment was carried out to remove the protein and recover the analyte extract with a high recovery (97.16%-106.56%), following which carnitine in the formula was derivatized to its ester form. Precolumn derivation with 1-aminoanthracene (1AA) was carried out in a phosphate buffer using 1-(3-dimethylaminopropyl)-3-ethylcarbodiimide hydrochloride (EDC) as the catalyst. Method validation was performed following the AOAC guidelines. The calibration curves were linear in the L-carnitine concentration range of 0.1-2.5 mg/L. The lower limit of quantitation and limit of detection of L-carnitine were 0.076 and 0.024 mg/L, respectively. The intra- and interday precision and recovery results were within the allowable limits. The results showed that our method helped reduce the sample preparation time. It also afforded higher resolution and better reproducibility than those obtained by traditional methods. Our method is suitable for detecting the quantity of L-carnitine in infant powdered milk containing a large amount of protein or starch.

• Korean Journal of Clinical Laboratory Science
• /
• v.53 no.1
• /
• pp.68-80
• /
• 2021

An uncertified facility is a facility not certified, as defined in the Biological Agents and Toxins Act (BATA) in Singapore, but has met the requirements of the Ministry of Health to possess First and Fifth Schedule biological agents and toxins. This type of facility is also known as a Biosafety Level 2 Plus (BSL 2+) facility. Registration as an uncertified facility or a BSL 2+ facility requires a certain process and procedure to be sought with the Biosafety Branch of the ministry. This review, shares first-hand knowledge on the journey to achieving registration of the authors' facility. The procedure involved considerable preparation, setting up facility requirements, biosafety precautions, procedures and practices, and training and competence of laboratory users. The ministry conducted a thorough onsite facility audit to ensure that the facility requirements and biosafety procedures and practices were in place. It then issued an approval letter of possession for the first-time use of biological agents and registered the laboratory as an uncertified facility. The expectation is that the comprehensive information shared may be of great benefit to other facilities with similar interests.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.45 no.2
• /
• pp.1-11
• /
• 2022

In this paper, we investigate the requirements of QPA(Quality Process Audit), which is a process quality audit system for secondary defense contractors, compared with those of DQMS(Defense Quality Management System). And evaluate whether the deployment of QPA meets the DQMS certification requirements through the case example of Company H. The evaluation items of QPA are composed of five categories such as Material Management, Incoming Inspection, Manufacturing Process, Product Evaluation, and Packaging Management. The QPA requirements are mainly related to the chapter 7(support) and chapter 8(operation) of DQMS standards. In this view point, QPA can be expected as an effective audit for suppliers preparing for DQMS certification. In the case example, we evaluate the results and effects of improvement due to QPA and compare it with the case of DQMS. QPA can be used as appropriate quality management standards of secondary and tertiary defense contractors and can provide the basis guidelines for the preparation of implementation steps in DQMS certification.

• The Korean Journal of Emergency Medical Services
• /
• v.26 no.1
• /
• pp.21-36
• /
• 2022

Purpose: This descriptive research study aimed to investigate the knowledge and perception of the natural disaster medical system by relevant disaster medical response teams in Jeonnam region, and provide baseline data for a disaster education program based on analysis of priorities of educational demand. Methods: Online questionnaires were distributed to 200 research participants including paramedics from five fire stations in J province, 22 public health centers, two disaster base hospitals, ERU (Emergency Response Units), and DMAT (Disaster Medical Assistance Team). The questionnaires elicited basic information about respondents, their knowledge and perception on disaster preparation and response, cooperation system, and educational and training needs. Results: The top priority items selected were: other disasters for paramedics, first aid for the rapid response team, and command system for DMAT. Conclusion: Customized education and training programs must be developed to suit each organizational need. Detailed operational guidelines must be established and with them a unified educational curriculum should be put into practice.

• Journal of Environmental Science International
• /
• v.32 no.8
• /
• pp.543-553
• /
• 2023

Weather forecasts and advisories provided by the national organizations in Korea that are used to identify and prevent disaster associated damage are often ineffective in reducing disasters as they only focus on predicting weather events (World Meteorological Organization(WMO ), 2015). In particular, typhoons are not a single weather disaster, but a complex weather disaster that requires advance preparation and assessment, and the WMO has established guidelines for the impact forecasting and recommends typhoon impact forecasting. In this study, we introduced the Typhoon-Ready System, which is a system that produces pre-disaster prevention information(risk level) of typhoon-related disasters across Korea and in detail for each region in advance, to be used for reducing and preventingtyphoon-related damage in Korea.