• 대한조선학회지
• /
• 제17권1호
• /
• pp.25-29
• /
• 1980

For the preliminary estimation of the vertical hull natural frequency, the Schlick's or Schlick-type formulae have been traditional ones and are still in common use today. Some investigators have made their efforts, based on statistical data of ships' system parameters, to extend the applicability of Schlick-type formulae to higher modes, or to utilize the Rayleigh method. For instance, the work done by Dinsenbacher et al.[5] belongs to the former and that of Nagamoto et al.[6] to the latter. In a part of his previous paper[7], the author, investigating the case of a cargo ship of medium size, suggested that provided statistically simplified curves such as trapezoid of system parameter distributions are available in hands, direct utlization of an ordinary computer program can be also an another convenient method by which we can obtain both natural frequencies and normal mode shapes. In this paper, to confirm the feasibility of the above suggestion, four high speed boats are investigated. The system parameters of them are originally given in [5]. The computer program used here is one confiled based on a calculation method derived from Myklestal-Prohl modeling of hull, transfer matrix formulation and an extended Gumbel's initial value method for solving frequency equation. The results of the investigation show that the direct calculation based on statistically oriented and reasonably assumed trapezoidal mean curves of system parameter distributions can give us natural frequencies within about 5% deviation up to several-noded modes and normal mode shapes serviceable at least up to 4- or 5-noded modes in comparision with those based on actual distributions of system parameters. For this simplified method the actual data required for input are only of ship length, displacement, total added mass, bending and shear rigidity at amidship. They are available at the early stage of design. By this method we can also easily trace variations of vibration characteristics in the course of ship design cycles.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2004년도 학술대회지
• /
• pp.73-78
• /
• 2004

For the preliminary stages of ship design it is necessary to develop a basic design, which specifies the main particulars of the vessel. based on the requirements given by the owner. An efficient design enables the shipyard to make a rough estimate of the construction costs and to put forward a favourable quote during the call for tenders. The parametric determination of the main particulars of the vessel involves the application of empirical formulae. These formulae have been created after detailed tests and research by maritime research institutions and researchers had been carried out. Here, the design of a medium sized Bulk Carrier (26000t dwt) with a service speed of 17 knots for carrying rice and rock phosphate has been illustrated. Medium sized Bulk Carriers (25,000t dwt - 50,000t dwt) are in steady demand among small shipping companies. They have a size advantage, in that port size restrictions do not affect their design tremendously. Nevertheless, structurally. they are one of the most difficult to build. During design, the rules of the maritime regulatory bodies were strictly adhered to.

• 대한조선학회논문집
• /
• 제41권3호
• /
• pp.60-71
• /
• 2004

Nowadays, We have had a growing interest in high-speed vessels' because it is very important to save time and cost in marine transportation. The development of hull form for high-speed vessels is high priority to secure the competitive power for the transportation of cargos. Therefore, the demand of the high-speed vessels is gradually increased, but the conventional hull forms are limited by rapidly increasing resistance upon the increase of ship speed in high-speed region. Therefore, new concepts for the hull form of high-speed vessels have been requested. One of the derived hull forms for that demand is the hull form of trimaran type. Trimaran has a very slender main hull as compared with conventional single hull so that is reduced in wave resistance. The slender main hull has the undesirable characteristics of stability, but two side hulls make up for the week points in the stability. That is, trimaran is able to have desirable performances for the resistance and stability. In this paper, for the design of 200TEU class container vessel with trimaran type, which will be cruised in Yellow-Sea region, firstly a preliminary hull is designed, and the model test is carried out with the variation of side hull position. From the experience of the preliminary hull form design, an improved hull form for the 200TEU container are designed, and the model tests are carried out. Also, a numerical computation technique is adopted for the simulation of flow phenomena around the designed hull forms. The final hull form is compared with existing ships for the resistance performance from the computation with computer and ship model tests.

• 대한조선학회지
• /
• 제4권1호
• /
• pp.59-65
• /
• 1967

Since the screw propellers were adopted as ship propulsion devices, the replacement of propeller shaft due to damage was mostly of fatigue failure due to the alternative stresses [1],[2]. To prevent such a failure, hence, it is suggested that careful attention should be paid to account of the alternative stresses on the design stage of the propeller shafts. In connection with this fact the Ship Classification Societies' Rules are regarded simply as guidance for preliminary determination of the shaft diameter. In this paper, limiting the topic to the small and medium-sized motor ships, an evaluation of the Rules formulae to a theoretical based on Soderberg's correlation [5] between the factor of safety and the resultant stresses obtained by application of the maximum shear theory is done. For this purpose eleven (11) ships built recently in Korea were taken as a species(refer to table 2. in text). In the end the following conclusions are made: (1) In general the Rules formulae give considerably larger size of the propeller shaft diameter than that derived from theoretical calculation, that is, about 7% more in AB and BV Rules, and about 20% more in LR and KR-NK Rules. (2) LR Rule gives the largest size of all, and AB Rule is mostly closed value to the theoretical. (3) The formular of the AB Rule is considered to be of the simplest in utilization and of the reasonable.

• 한국해양공학회지
• /
• 제27권6호
• /
• pp.16-21
• /
• 2013

In this paper, the mooring system for a floating wave energy farm is designed based on a two-dimensional analysis. The mooring system uses an anchorless mooring line linking two floaters in a floating wave energy farm. The basic equation to determine the length of the mooring line between the two floaters is proposed. The other properties such as the diameter and pretension are taken from the mooring line for a single floater. The dynamic behavior and safety of the designed mooring system under extreme ocean conditions are analyzed with the commercial software Orcaflex. A numerical study shows the stability and high safety in tension of the designed mooring lines for a floating wave energy farm. The proposed anchorless mooring system for a floating wave energy farm results in a considerable reduction in the length of the mooring line, contributing to the economics of a floating wave energy farm.

• 정보기술응용연구
• /
• 제1권
• /
• pp.99-127
• /
• 1999

최근 기업의 생산성 향상을 위한 설계 및 생산 환경의 분산화에 따른 원격지 공동설계의 필요성이 증대되고 있다. 마찬가지로 선박설계 과정도 그 과정이 매우 복잡하고 많은 양의 데이터를 다루고 있는 작업으로서 그 환경이 분산화, 이질화됨에 따라 최근 들어 CSCW (Computer Supported Collaborative Work)의 요구가 증대되고 있다. 본 논문에서는 분산된 선박설계 환경에서의 원격지 공동설계를 지원하기 위한 에이전트기반 선박설계 시스템을 개발하였다. 특히 여기서는 에이전트간의 정보교환 및 지식공유 과정에서 발생하는 의사충돌 문제를 해결하기 위하여 사례기반 추론 기법을 이용하여 이의 해결을 시도하였다. 설계 에이전트, 이들을 중재하는 퍼실리테이터, 충돌 처리기, 그리고 사례기반 시스템의 유기적인 도움을 받아 설계자는 설계과정에서 발생하는 설계 시스템간의 의사충돌 문제에 대한 의사결정을 과거의 유사한 문제해결 사례로부터 효과적으로 처리할 수 있다.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 2006년도 추계학술대회 학술발표 논문집 제16권 제2호
• /
• pp.193-196
• /
• 2006

프로펠러 회전면에서의 반류분포는 주로 모형시험에 의해서 규명되어 왔다. 이렇게 축적된 데이터베이스를 통해 선박의 기하학적 형상정보와 반류분포 사이의 입출력관계를 모델링할 수 있다. 면 선박 초기설계시 유사선종의 설계에 도움이 된다. 본 연구에서는 이들 입출력 사이의 관계를 뉴로퍼지시스템으로 모델링하고 학습한 후 새로운 입력에 대한 출력값의 검토를 통해 그 유용성을 확인한다.

• Journal of Astronomy and Space Sciences
• /
• 제32권3호
• /
• pp.257-268
• /
• 2015

Characteristics of delta-V requirements for deploying an impactor from a mother-ship at different orbital altitudes are analyzed in order to prepare for a future lunar CubeSat impactor mission. A mother-ship is assumed to be orbiting the moon with a circular orbit at a 90 deg inclination and having 50, 100, 150, 200 km altitudes. Critical design parameters that are directly related to the success of the impactor mission are also analyzed including deploy directions, CubeSat flight time, impact velocity, and associated impact angles. Based on derived delta-V requirements, required thruster burn time and fuel mass are analyzed by adapting four different miniaturized commercial onboard thrusters currently developed for CubeSat applications. As a result, CubeSat impact trajectories as well as thruster burn characteristics deployed at different orbital altitudes are found to satisfy the mission objectives. It is concluded that thrust burn time should considered as the more critical design parameter than the required fuel mass when deducing the onboard propulsion system requirements. Results provided through this work will be helpful in further detailed system definition and design activities for future lunar missions with a CubeSat-based payload.

• 대한조선학회논문집
• /
• 제40권4호
• /
• pp.8-15
• /
• 2003

This paper presents the method for developing an optimum hull form with minimum wave resistance using SQP(sequential quadratic programming) as an optimization technique. The wave resistance is evaluated by a Rankine source panel method with non-linear free surface conditions and the ITTC 1957 friction line is used to predict the frictional resistance coefficient. The geometry of the hull surface is represented and modified using B-spline surface patches. The optimization method is applied to Series 60 hull and KCS(KRISO 3600 TEU Container Ship). The obtained results prove that the method is appropriate for preliminary hull form design.

• Journal of Ship and Ocean Technology
• /
• 제11권4호
• /
• pp.1-20
• /
• 2007

After the introduction of the World Trade Organization, large scale container ships are being used as a means of transportation for international trade. Therefore, improving the loading and unloading capability of container quays is the most economic way, considering the cost needed for the establishment or expansion of container quays. In this paper, a new container cargo handing system that is equipped with a high performance container crane is suggested. A structural analysis on the container crane is also conducted to decide the form and size of structural member scantlings, using NASTRAN, which is a general structure analysis program.